Treevol Furniture WHFP053 2 Doors 3 Drawers Armoire Instruction Manual
- September 6, 2024
- Treevol Furniture
Table of Contents
WHFP053 2 Doors 3 Drawers Armoire
Product Information
Specifications
- Product: 2 Doors 3 Drawers Armoire
- Requirement: Must be fixed to the wall for safety
- Includes: Necessary items for fixing to the wall
Product Usage Instructions
What You Will Need
Hi! My name is Armando, and I’ll guide you through assembling
this cabinet. You will need:
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- Electric screwdriver (optional but recommended)
Where to Start
It is crucial to ensure all parts are in good shape before
starting assembly. Verify the quantity of each panel and hardware
component according to the list provided.
Hardware Bag Contents
The hardware bag contains:
- Wood dowel x60
- Spreading bolt x55
- Minifix cam x55
Dowels and Minifix System Usage
When using dowels and the Minifix system:
Wood Dowels:
- Insert the dowel into the indicated hole.
- Gently hit it until fully inside to join panels together.
Minifix System:
- Use a spreading bolt and Minifix cam for joint compounds.
FAQ
Q: Is professional installation recommended?
A: Yes, for safety reasons, professional installation is highly
recommended to secure the cabinet properly to the wall.
Q: Can children climb on the drawers or shelves?
A: No, it is advised to never allow children to stand, climb, or
hang on drawers, doors, or shelves to prevent tip-over
accidents.
ASSEMBLY INSTRUCTIONS
2 DOORS 3 DRAWERS ARMOIRE
THIS FURNITURE MUST BE FIXED TO THE WALL
! WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
ALWAYS secure this furniture to the wall using a wall anchor. NEVER allow
children to stand, climb, or hang on drawers, doors or shelves. Do not defeat
or remove the drawer interlock system. Place heaviest items in the lowest
drawers. NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly
secure it to the wall using a wall anchor . This product includes the
necessary items for fixing the furniture to the wall. However, it is important
to note that incorrect installation or failure to use the tip-over device can
result in serious injury or even death. For this reason, we highly recommend
that a professional installer handle the installation of the cabinet to the
wall.
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5-6
Let’s start assembling!
7
How much weight does your cabinet resist?
24
Our last recommendations for taking care of your cabinet
25
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1
B – x1
C – x1
D – x1
E – x1
F – x1
G – x2
H – x3
I – x1
J – x1
K – x2
L – x3
M – x3
N – x3
O – x1
P – x1
PD – x1 PI – x1
Q – x2
R – x3
S – x1
T – x2
3
What’s in the hardware bag?
Wood dowel
x60
Spreading bolt
x55
Minifix cam
x55
Cover caps
x60
Nail
Flat head screw
Hinge + screws
Hinge + screws
x54
x10
x4
x4
2″
Nail-on glide
x8
Drywall screw
x12
Lock with key
x1
Look brace
x1
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
4
What’s in the hardware bag?
Handle x5
H profile x2
Drawer slides + screws
x3
Closet rod x2
2 1/2″ 1 1/8″
Closet rod support x4
Wall anchor + screw x2
Drywall screw
x2
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 5
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
6
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
I
2
H x3
7
3 Drawer slides installation (apply for steps 3 and 14)
The wheel should go towards the front edge of the panel and
facing down, like this:
4
13
Front
Down
C
Turn this panel over
C
8
4
C
H
HH
I
5
9
6
O
7
H H
C
I
P
O
10
8
G x2
9
E
11
10
G G E
Turn this panel over
E G
12
11
D
12
H
D
H
IC
P
O G
E G
13
13
B
14
To recall the slides installation you can go to the 3rd step again.
13
4
A
14
15
A
HH C
D
I
P
G
O
E
B
G
16
Drywall screw 1 1/8″
F S
15
17
Q Q
3mm
3mm
Q Q
D
C
H H
T
H
T
G
TT
A
E
G
Turn over the cabinet
very carefully!
16
18
D H HF AH
ICO
B
T
GE
19
L x3
17
20
M x3
21 X3
L
Drywall screw 2″
N M
18
22
K x2
23 X2
R L
M K
19
24
J
25
R L
M J
20
26
Putting the drawers in
The wheel should go on the rear part of the drawer.
R
K
M
27
R
J
M
21
28
Fix your cabinet to the wall
1 You must drill the bottoms guided by the holes in the structures wiht a
3/16″ drill bit.
2 On the wall, measure and mark the points shown below. 3 Drill on the
markings with a 5/16″ drill bit. 4 Insert the wall anchors inside the
drillings. 5 Place the cabinet and secure it with the screws.
87 34,29
35,1 13,85
27,6 10,9
P
Q
Q
O
194,5 76,6
Dimensions in inches Dimensions in cm
TT G
22
29
Slide the drawer inside the cabinet.
Assembling and setting up the door
H H AH
I J PI
FD C Q PD B
K
K
E
G
Hinge adjustment
Depth adjustment
Lateral adjustment
After adjusting all the Minifix cams, cover
them up with the cover caps.
Height adjustment
Front screws adjustment
A
After finishing the assembly, lift off al the
adhesive letters.
23
How much weight does my cabinet resist?
17,6
17,6
17,6
33
17,6 11
11
11
33
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
24
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
D
M RN J
L
PI PD
A
FP
H
S
H
H
I CQ Q
M RN K
LM
N R
K
L
T
T
E
O
B
GG
25
WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in
the lot number printed on the product box and the assembly instructions
leaflet. Warranty covers materials and workmanship imperfections which impair
the assembly or correct functioning of the cabinet. This warranty is not valid
if the defects or imperfections are caused by the incorrect following of the
assembly instructions, warnings and recommendations, misuse, intentional
damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized, when it´s been assembled 3 months after
the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will
not be responsible for defective and/or damaged parts. This warranty is ONLY
valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been
resold, rented, etc. Furniture will take no liability for incidental or
consequential damages caused to or by the product (This may not apply in your
state). To make this warranty valid you must write to our customer service
email describing the product defect, lot number and submitting your sales
reciept or proof of purchase, or contact us at our customer service line.
Replaced parts will be under the product´s original warranty coverage period.
Damaged parts will become property of the company. There are no other
warranties applicable to this product.
26