Treevol Furniture WHFP074 TV Rack Instruction Manual

September 6, 2024
Treevol Furniture

WHFP074 TV Rack

“`html

Product Information

Specifications:

  • Product: TV Rack
  • Recommended Usage: Indoor
  • Material: Wood
  • Color: Varies per model
  • Dimensions: Varies per model

Product Usage Instructions

What You Will Need:

  • Phillips head screwdriver
  • Flat head screwdriver
  • Hammer
  • A flat, smooth surface (cardboard or rug)

Assembly Steps:

1. Where to Start:

Check the panel and hardware content to ensure all parts are
present and in good condition.

2. Hardware Bag Contents:

Ensure you have all the necessary hardware including dowels,
spreading bolts, Minifix cams, cover caps, nails, hinges, screws,
wooden legs, handles, rear panel clamps, flat head screws, wall
fixing kit with screws, and pneumatic arms.

3. Dowels and Minifix System:

Follow these steps when using dowels and Minifix system:

  • Wood Dowels: Insert the dowel into the
    indicated hole and gently hit it until fully inside when joining
    two panels together.

  • Minifix System: Insert the Minifix cam with
    the arrow pointing towards the drilling on the panel’s edge and
    secure the joint with the spreading bolt.

4. Assembly Process:

Refer to the manual for a full look at the cabinet panels and
start assembling according to the provided instructions.

Frequently Asked Questions (FAQ)

Q: Do I need to secure the furniture to the wall?

A: Yes, it is crucial to secure the furniture to the wall using
the provided tip-over device to prevent accidents.

Q: Can children climb or hang on the TV rack?

A: No, it is unsafe for children to stand, climb, or hang on the
TV rack as it may lead to tip-over incidents.

Q: Can I put a TV on this furniture?

A: No, it is advised not to place a TV on this furniture for
safety reasons.

“`

ASSEMBLY INSTRUCTIONS
TV RACK
! WARNING
Children have died from furniture tip over. To reduce the risk of tip over:
ALWAYS secure this furniture to the wall using an anti-tip device. NEVER allow children to stand, climb, or hang on drawers, doors or shelves. Do not defeat or remove the drawer interlock system. Place heaviest items in the lowest drawers. NEVER put a TV on this furniture.
To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture
to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?
(We also explain what they are)

5

Let’s start assembling!

6

How much weight does your cabinet resist?

16

Our last recommendations for taking care of your cabinet

17

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x1 I – x1

B – x1 F – x1 J – x2

C – x1 G – x1 K – x1

D – x1 H – x1

3

What’s in the hardware bag?

Dowel
x10

Spreading bolt
x20

Minifix cam
x20

Cover caps
x20

Nail

Hinge + screws

Wooden leg

Handle

x28

x4

x5

x2

8×5/8 ”

Rear Panel Clamp
x2

Flat head screw
x20

Wall Fixing Kit + Screws
x2

Flat head screw
x2

Pneumatic arm
x2
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

4

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

5

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.

Flat head screw
A

2

Turn this

panel over

A

6

3
C
4
D 7

5
C
6

A

D

G 8

7
F
8 Turn this panel over F
9

9
E

10

Turn this panel over

E 10

11

E G F

12

E

C

G

F

A

D

11

13

B

14

B

C

E

G F
A

D

12

15

B J

K

J

C

16
H I

13

17 Assembling and setting up the door

1

2

C H

B
G A

Insert the arm into Assemble the caps

the pivot

to secure the arm

F
D
I

8×5/8 ”

Flat head screw

Hinge adjustment

Depth adjustment

Lateral adjustment

Height adjustment

Front screws adjustment

14

18

Fix your cabinet to the wall
1 Make a small hole on the top edge of the furniture top and fix one side of the strip with the 15mm screw and the washer.
2 Stretch the strip and measure on the wall to drill. 3 Drill a hole in your wall to a depth of 30mm using a 6mm drill bit. 4 Insert the plastic wall anchor into the hole. 5 Fix the other side of the strip with the screw and the washer.

H

B

G

A

I

D

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.

15

How much weight does my cabinet resist?

52

22

22

22

22

*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
16

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels

B

J

C E

K

J

G

F

H

A

D

I

17

WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
18

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Treevol Furniture User Manuals

Related Manuals