Treevol Furniture WHFP072 Kitchen Pantry Glenwood Instructions

September 6, 2024
Treevol Furniture

Treevol Furniture WHFP072 Kitchen Pantry Glenwood

Product Usage Instructions

  • Hi! My name is Armando, and I’ll be with you while you assemble this cabinet.
  • Make sure to check the panel and hardware content for the cabinet. Ensure the quantity is correct and everything is in good shape before starting assembly.
  • Be careful not to lose anything from this bag, as its contents are necessary for assembling your cabinet:
  • Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
  • Gently hit the panels to adjust the joint when joining two panels together.
  • Insert the Minifix cam with the little arrow pointing toward the drilling on the panel’s edge.
  • Secure the joint by turning and locking the Minifix cam in place.

FAQ

  • Q: How much weight can the cabinet resist?
  • A: The weight capacity of the cabinet varies based on its design and materials. Please refer to the product specifications for weight capacity information.
  • Q: Can I use an electric screwdriver for assembly?
  • A: An electric screwdriver is optional but can make the assembly process much easier. However, ensure not to overtighten screws to avoid damaging the cabinet.

WARNING

Children have died from furniture tip-overs. To reduce the risk of tip-over:

  • ALWAYS secure this furniture to the wall using an anti-tip device.
  • NEVER allow children to stand, climb, or hang on drawers, doors or shelves.
  • Do not defeat or remove the drawer interlock system.
  • Place the heaviest items in the lowest drawers.
  • NEVER put a TV on this furniture.

To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a tip-over device. This product includes the necessary items for fixing the furniture to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.
For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

What will you need?

Where should you start?

This is so IMPORTANT!

Over the next few pages is the panel and hardware content for this cabinet. Please make sure that the quantity of each one is correct, and that everything is in good shape.(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

How do the dowels and Minifix systems work?

How do the dowels and Minifix systems work?

Every time you’re using one of these connectors during the assembly, you should follow these same steps.

Wood dowels
They are little wooden cylinders.

  1. Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
  2. When joining two panels together, don’t forget to gently hit the panels to adjust the joint.

Minifix system

It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

  1. This is a Minifix cam.
    It has a little arrow on its upper surface.

  2. You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).

  3. This is a spreading bolt.
    You should put it with the black plastic part facing down.

  4. After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.

installation instruction

Let’s start assembling!

You can see the last page of this manual to have a full look of the panels of this cabinet.

Drawer slides installation apply for steps 1 and 6)

The wheel should go towards the front edge of the panel facing down, like this:

To recall the slides installation you can go to the 3rd step again.

Place the corner supports in the corners and screw with flat head screw 9/16″


Putting the drawers in

Fix your cabinet to the wall\

  1. On the wall, measure and mark the points shown below.
  2. Drill on the markings with a 5/16″ drill bit.
  3. Insert the wall anchors inside the drillings.
  4. Place the cabinet and secure it with the screws.

Measurements in cm

  • Measurements in inches

Hinge adjustment

How much weight does my cabinet resist?

Congratulations! It’s done

But don’t go yet!
There are some recommendations left for you to take care of your cabinet correctly from now on.

SUPER IMPORTANT!

We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.

Taking care of your cabinet:

  • Do not paint the cabinet.
  • The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
  • Clean the metallic hardware with a dry cloth.
  • DO NOT overload the cabinet (see suggested loads)
  • Do not hit or hammer the cabinet (only when indicated here).
  • Don’t drag the cabinet, lift it up with other people.
  • Avoid direct contact with water, fire or exposing it to high heat.
  • Clean it with thinner, a soft soap solution or simply a damp cloth.

Cabinet panels

WARRANTY POLICY

  • Furniture has a 1-year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.
  • Warranty covers materials and workmanship imperfections that impair the assembly or correct functioning of the cabinet.
  • This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings, and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired
  • by someone not authorized when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.
  • This warranty is ONLY valid for the ORIGINAL purchase, it doesn’t apply if the product has been resold, rented, etc.
  • Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).
  • To make this warranty valid you must write to our customer service email describing the product defect, lot number and submit your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s
  • original warranty coverage period. Damaged parts will become the property of the company.
  • There are no other warranties applicable to this product.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Treevol Furniture User Manuals

Related Manuals