Treevol Furniture WHFP081 80 C Desk Instruction Manual

Treevol Furniture WHFP081 80 C Desk

Specifications:

• Product Name: 80 C Desk
• Tools Needed: Phillips head screwdriver, Flat head screwdriver, Hammer
• Additional Tools (optional): Electric screwdriver

Product Usage Instructions

What You Will Need:
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

• Phillips head screwdriver
• Flat head screwdriver
• Hammer
• A flat, smooth surface (cardboard or rug)
• Optional: Electric screwdriver

Assembly Steps:

Panel and Hardware Check:
Ensure all panels and hardware are accounted for and in good condition according to the provided list.

Dowels and Minifix System:
Follow these steps for using wood dowels and Minifix system:

• Wood Dowels:

1. Insert the dowel into the indicated hole.
2. Gently hit the panels to adjust until fully inside.

• Minifix System:

1. Insert the Minifix cam with the arrow pointing towards the drilling on the panel’s edge.
2. Secure the joint by turning the Minifix cam.

Drawer Slides Installation:
Follow the provided steps for installing drawer slides correctly.

Finalizing Assembly:
After adjusting all Minifix cams, cover them with the provided cover caps. Remove adhesive letters after assembly completion.

Frequently Asked Questions (FAQ):

• How much weight can my cabinet resist?
  The cabinet can resist up to 22 pounds of weight.

• Are additional tools required for assembly?
  An electric screwdriver is optional but can make the assembly process easier.

• What should I do after finishing assembly?
  Make sure to follow the provided recommendations to properly care for your cabinet.

It’s much better if you get some company for this!

What will you need?

Where should you start?

This is so IMPORTANT! Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)

Panel quantity

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

How do the dowels and Minifix system work?

This is so important too!
Everytime you’re using one of these connectors during the assembly, you should follow these same steps.

Wood dowels
They are little wooden cylinders.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

ASSEMBLING

Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.

How much weight does my cabinet resist?

Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet correctly from now on.

SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.

Taking care of your cabinet:

• Do not paint the cabinet.
• The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
• DO NOT overload the cabinet (see suggested loads)
• Do not hit or hammer the cabinet (only when indicated here).
• Clean it with thinner, a soft soap solution or simply a damp cloth.
• Don’t drag the cabinet, lift it up with other people.
• Avoid direct contact with water, fire or exposure to high heat.

Cabinet panels

WARRANTY POLICY

• Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.

• Warranty covers materials and workmanship imperfections that impair the assembly or correct functioning of the cabinet.
  This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.

• This warranty is ONLY valid for the ORIGINAL purchase, it doesn’t apply if the product has been resold, rented, etc.

• Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).

• To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company.

• There are no other warranties applicable to this product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>