WHFP075 Tv Stand B Magness Sleek Storage with Cabinets and Shelves

Specifications

• Panel Quantity:
  • A – x1
  • B – x1
  • C – x1
  • D – x1
  • E – x1
  • F – x1
  • G – x1
  • H – x1
  • I – x1
  • J – x2
  • K – x1
• Hardware:
  • Wood Dowel – x14
  • Spreading Bolt – x20
  • Minifix Cam – x20
  • Cover Caps – Color 1 x20
  • 8×5/8 Inset Overlay Hinge + Screws – x4
  • Rear Panel Clamp – x2
  • Handle – x2
  • Flat Head Screw – x4
  • Leg Nail – x36

Product Usage Instructions

What You Need:

• Phillips head screwdriver
• Flat head screwdriver
• Hammer
• Flat, smooth surface (cardboard or rug)
• Electric screwdriver (optional)

Assembly Steps:

Step 1: Checking Parts

Ensure all panels and hardware are present and in good condition
as per the provided list.

Step 2: Using Dowels and Minifix System

Follow the instructions on how to use wood dowels and Minifix
system for joining panels together.

Step 3: Assembling Panels

Follow the assembly sequence as shown in the manual, rotating
and joining panels as indicated.

Step 4: Door Installation

Install the door using the provided screws. Follow the
adjustment instructions for hinge alignment.

Step 5: Final Touches

Adjust Minifix cams as needed and cover them with the provided
cover caps. Remove any adhesive labels.

FAQs

How much weight can my cabinet hold?

The cabinet can resist up to 22 pounds. Please do not exceed
this weight limit to ensure the longevity of your product.

What are the key recommendations for cabinet care?

– Ensure not to overload the cabinet beyond the weight
limit
– Regularly check for loose fittings
– Clean with a soft, damp cloth
– Avoid using harsh chemicals or abrasive materials on the
surface

ASSEMBLY INSTRUCTIONS
TV RACK
It’s much better if you get some company for this!

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?
(We also explain what they are)

5

Let’s start assembling!

6

How much weight does your cabinet resist?

14

Our last recommendations for taking care of your cabinet

15

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x1 I – x1

B – x1 F – x1 J – x2

C – x1 G – x1 K – x1

D – x1 H – x1

3

What’s in the hardware bag?

Wood dowel
x14

Spreading Bolt
x20

Minifix Cam
x20

Cover Caps
Color 1
x20

8×5/8 ”

Inset overlay hinge + screws
x4

Rear Panel Clamp
x2

Handle
x2

Flat head screw
x2

Flat Head Screw

Leg

Nail

x16

x4

x36

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

4

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

5

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.

Flat head screw
A
A

Rotate

2

C

D

6

3
C D
A
4
E
Rotate
E
7

5
F
6

Rotate
F

G

8

7
E

G F

8
C

E
GF

A

D

9

9
B

10

B

C

E

GF

A

D

10

11
J

3mm

3mm

B

K

J

11

12 Door Installation

8×3/8 ”

H/I

B

H

G

A

D

I

Follow the adjustment instructions on the next page. 12

13 Hinge adjustment

Depth adjustment

Side adjustment

Height adjustment

A B
Screws adjustment
A
B
Use the settings acourding to the specific need.

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.

13

How much weight does my cabinet resist?

22

5.5

11

5.5

11

*weight in pounds

Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
14

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels

B

C

J

K

E

H

G

F

J

I

D

A

15

WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
16

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>