MUZEN XOG-OE1 Sway Shake Open Ear Headphones User Guide
- September 18, 2024
- MUZEN
Table of Contents
MUZEN Sway Shake Open-Ear
Headphones
XOG-OE1 Sway Shake Open Ear Headphones
To all users
Thank you very much for using our products. This product is a new rear-hanging
headphone product launched by the OG sub-brand of the Maowang audio brand. It
inherits the product experience of Maowang products, which is “good-looking,
good-sounding, easy to use and fun”, allowing you to connect with your
favorite music and sound content more conveniently and easily. It is not only
small and portable but also easy to operate, suitable for multiple scenarios,
and we hope to bring you a high-quality listening experience. Note: Since this
product is battery- powered, in order to give you a better product experience,
we recommend that you charge it for two hours before using it when you get it.
What’s in the box
1. Headphones x1
2.Usb Cable x1
3. Manual x1
4. Warranty Card x1
Operating Instructions
-
It is the headphone touch area
**Note: Only area 1 supports touch control -
Charging port
-
Light display area
Lighting effect display:
- Battery display: The breathing lights on the left and right sides flash when charging, and turn off after 3 minutes of full power.
- Low battery: The light flashes and there is a voice prompt of low battery.
HOW TO TURN ON HEADPHONES
When headphones are off, touch the R area for two seconds to turn on.
Function | Instructions For Use |
---|---|
Switch On | Touch R area for 2s |
Switch Off | Touch R area for 3s |
Bluetooth Reset | Quick tap R area 5 times |
Play/Pause | Quick tap R area 2 times |
Forward | Touch R area for 1s and release |
Answer/Hung up a call | Touch R area 2 times |
Reject a call | Touch R area for 1s |
Third-party inbound call answering | Quick tap R area 2 times |
Wake up voice assistant | Quick tap R area 3 times |
Lights on/off | Quick tap R area 1 time and then long press for 1s |
Specifications
Product Name: Sway Shake Open-Ear Headphones
Model: XOG-OE1
Bluetooth version: 5.3
Speaker size: $0.63in
Size: 4.4in x 5.2in x 2in
Net weight: 0.05lb
Battery: 80mAh
Frequency response range: 20Hz-20KHz
Charging port: Type-C
Charging voltage: DC 5V 1A
Warranty period: 1 year
Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
Add.: Room 1202, Block A, Guangqi Future Center, Gaoxin South 4th Road,
Nanshan, Shenzhen, China
Contact: info@muzenaudio.com
Made In China
***Note: Since this product uses Bluetooth connection, in daily use, it may be
affected by factors such as the environment, mobile phone brand, and usage
behavior. It is normal to have short and slight sound jams during music
playback.
Important Notes
To ensure safety, please read and follow the following safety instructions in detail:
- The manufacturer has the right to make some detailed modifications or adjustments to the specifications and product details of this product without notifying the user.
- Please use the product in a dry environment.
- The product should not be close to or in contact with exposed fire sources.
- The product is waterproof grade IPX5, but it is necessary to pay attention to certain waterproof and moisture-proof in daily use.
- The normal operating environment temperature of this product is 0-45°. It is recommended not to use this product under environmental conditions exceeding this.
- Do not modify, repair or dismantle this product without authorization, otherwise, you will not be able to enjoy the warranty service.
- If consumers use a power adapter for power supply, they should purchase a power adapter that has obtained CCC certification and meets the standard requirements.
- Note that if the battery is not replaced properly, there is a risk of explosion. If necessary, please go to a professional repair shop. After replacing the battery, this product will no longer enjoy warranty service.
Product Pollution Index
Product Name and content of toxic substances in the product
Component name| Toxic and hazardous substances or elements
Structural components| Lead (Pb)| Cadmium(Cd)| Mercury
(Hg)| Hexavalent
chromium (Cr6+)| Polybrominated biphenyls (PBB)| Polybrominated dipheny ethers
(PBDE)
Motherboard| 0| 0| 0| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0
Wires| 0| 0| 0| 0| 0| 0
Speakers Screws| 0| 0| 0| 0| 0| 0
Packaging materials| 0| 0| 0| 0| 0| 0
〇:Indicates that the content of the hazardous substance in all homogeneous
materials of the component is below the limit requirements specified in
SJ/T113642014 W
X: Indicates that the content of the hazardous substance in at least one
homogeneous material of the component exceeds the limit requirements specified
in SJ/T113642014
Warranty terms
- Enjoy one year of free warranty service from the date of purchase.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with
exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>