MUZEN P9I Mini Handbag Portable Bluetooth Speaker Owner’s Manual

MUZEN P9I Mini Handbag Portable Bluetooth Speaker

Specifications:

• Signal to noise ratio : 70 dB
• System frequency response: 120 Hz~20 KHz
• MIC use distance : 0.05m (** Note: This distance applies to a quiet surrounding environment.)
• Battery : 3.7 V/400 mAh
• Charging port : TYPE-C
• Charging voltage : DC 5V 1A

Product Usage Instructions

Charging:
For a better experience, it is recommended to charge the speaker for about two hours in the OFF state before using it.
Here are the steps to charge the device:

1. Locate the TYPE-C charging port under the clamshell.
2. Connect the included USB cable to the charging port and a power source.
3. The charging indicator will show red when charging and green when fully charged.

Power and Volume Control:
The main unit features power, volume control, and recording functions. Follow these instructions:

• To power on, long press the button for 3 seconds. To power off, long press the button for 3 seconds.
• To adjust volume, turn the button clockwise to increase and counterclockwise to decrease.

Bluetooth Connectivity:
To connect via Bluetooth:

• Blinking warm white indicator : Bluetooth connection available
• Steady warm white indicator : Device connected.
• For Bluetooth reset, short press the button 5 times.

Recording Function:
To record and playback:

• Short press the button 2 times to record for 30 seconds, then repeat to end recording.
• To play the recording, short press the button once.

FAQ :

• Q: How long is the warranty period for the MUZEN Mini Handbag Portable Bluetooth Speaker?
  A: We provide one year of free warranty service for the hardware of this product. For more details, visit www.muzenaudio.com or contact our local distributors.

• Q: What should I do if I need to replace the battery?
  A: Improper battery replacement may cause a risk of explosion. Please go to a professional maintenance point for battery replacement. After replacement, warranty services will no longer apply.

• Q: How do I know if the speaker is fully charged?
  A: The charging indicator will show green when the speaker has been fully charged.

Product User Manual
MUZEN Mini Handbag Portable Bluetooth Speaker

• [email protected]
• www.muzenaudio.com

Dear users:
Thank you very much for using our product. This product is a new portable Bluetooth speaker launched by MUZEN, which inherits the company’s design philosophy of “Aesthetically pleasing, Great sound, User-friendly and Entertaining”, enabling you to connect with music and sound content more conveniently and simply.
This speaker is powered by batteries. For a better experience, you are recommended to charge it for about two hours in the OFF state prior to using it.

Packing List

Operation Instructions of the Main Unit

1. Bluetooth indicator:
   Blinking of the warm white indicator: Bluetooth connection is available. Steady on of the warm white indicator: The device has been connected.

2. Power switch/Volume control/Recording control:

   • Power on: Long press the button for 3 seconds.
   • Power-off : Long press the button for 3 seconds.
   • Volume up: Turn the button clockwise.
   • Volume down : Turn the button counterclockwise.
   • Recording deletion: Short press the button 3 times to delete the archived recording.
   • Bluetooth reset : Short press the button 5 times.
   • Recording: Short press the button 2 times to record for 30 seconds and re-short press the button 2 times to end the recording.
   • (Note: Please start recording after the prompt tone is over to avoid incomplete recording.)
   • Recording playback: Short press the button once to play the recording.

3. Speaker: for playing music (** Note: This part is fragile. Please do not press it hard.)

4. TYPE-C charging port : It is located under the clamshell and is used to charge the device.

5. Charging indicator: It is located below the clamshell. The red indication is on when the speaker is being charged, and the green indicator is on when the speaker has been fully charged.

Hardware Parameters

• Product model : MW-P9I
• Product dimensions : 60.5 mm×33.6 mm×72.6 mm
• Net weight of the product : 68.2 g
• Bluetooth: Bluetooth 5.0
• Bluetooth connection distance: 5m≤Distance≤10m
• Loudspeaker: 4Ω 3W
• Amplifier power: 3W
• Signal to noise ratio : ＞70 dB
• System frequency response : 120 Hz~20 KHz
• MIC use distance: ≤ 0.05m
• ( Note:** This distance applies to quiet surrounding environment.)
• Battery: 3.7 V/400 mAh
• Charging port: TYPE-C
• Charging voltage : DC 5V 1A

Precautions

To ensure safety, please carefully read and follow the following safety instructions:

1. The manufacturer has the right to modify or adjust the specifications and details of this product without notifying the user.
2. Please use this product in a dry environment.
3. Keep this product away from exposed sources of fire.
4.  Be sure to use this product in an environment where the ambient temperature is 0-45 °C. Do not use this product beyond this environmental condition.
5.  Do not modify, repair or remove this product without authorization.  Otherwise, you may not enjoy the warranty service.
6. The approval number is displayed on the back of the product.
7. Note that improper battery replacement may cause a risk of explosion. If  necessary, please go to a professional maintenance point for battery replacement. After the battery is replaced, you will no longer enjoy the warranty service.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. 1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Warranty Description

• We provide one year of free warranty service for the hardware of this product. For service details, please visit www.muzenaudio.com or contact our local distributors.
• E-mail : [email protected]
• Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
• Address: 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, PRC.

References

• Retro Portable Radio Mini Bluetooth Speaker | Muzen Audio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>