MUZEN Wild Mini Portable Bluetooth Speaker User Manual

June 5, 2024
MUZEN

MUZEN Wild Mini Portable Bluetooth Speaker User Manual

Welcome to the MUZEN Family! Thanks for choosing us to accompany you on your life adventure. Please read this manual carefully and make sure to follow the relevant safety instructions before using it.

Tips:

This product is battery-powered. For a better experience, please charge it for about two hours with it powered off before first-time use.

Packing List

  1. Speaker x 1
  2. Product manual x 1
  3. USB charging cable x 1

Speaker Operating Instructions

  1. Bluetooth Indicator/Flashlight Window:
    Fast flashing warm white light: ready for Bluetooth pairing
    Pair your device with “Muzen Wild Mini” Bluetooth option in your device Bluetooth  control dashboard
    Slow breathing warm white light: Bluetooth connected
    Steady white light: Flashlight on

  2. Power Switch/Flashlight Control:
    Power-on: Rotate counterclockwise and then hold for 3s
    Power-off: Rotate counterclockwise (when device is on) and then hold for 3s
    Bluetooth reset: Rotate clockwise and then hold for 3s
    Flashlight on/off: Long press the power switch
    Flashlight mode (strong light – weak light – SOS) switch: Short press the power switch

  3. Track Switch:
    Last track: Rotate counterclockwise
    Next track: Rotate clockwise
    Pause/Play: Short press

  4. Volume Knob:
    Volume up: Rotate counterclockwise
    Volume down: Rotate clockwise

  5. Loudspeaker:
    for playing music.
    (**Note: Fragile part. Please do not press this position hard.)

  6. Strap hole:
    used for installing a strap.

  7. USB charging port:
    Located under the cover for charging the device.
    (**Note: Pay attention to the direction of connector when plugging the cable into the charging port.)

Product Features

  • Bluetooth technology
  • Compact and portable
  • Excellent sound quality
  • Hardcore design
  • Lithium battery

Hardware Parameters

Product model: MW-PVXI
Product size: 60.8mm (L) x 37.5mm (W) x 77.9mm (H) / 2.4in (L) x 1.5in (W) x 3.1 in (H)
Net weight: about 248g / 0.55lbs
Bluetooth transmission range: 5m ≤ distance ≤ 10m / 16.4ft ≤ distance ≤ 32.8ft
Loudspeaker: 4Ω 5W
Amplifier power: 5W
SNR: > 70 dB
System frequency response: 80Hz-18kHz
Battery: 3.7V/800mAh
Charging port: MicroUSB
Charging voltage: DC 5VDC Symbol1A

Important Notes

For your safety, please read the following instructions carefully and comply with them:

  1. The manufacturer reserves the right to modify or adjust the specifications and details of the product without notifying users.
  2. Please use the product in a dry environment wherever possible.
  3. The product should not be placed near or in contact with exposed sources of fire.
  4. IPX5-rated, the product is protected against rain.
  5. This product can be used normally with the ambient temperature of 0-45°C. Do not use it outside of this range.
  6. Do not modify, repair or dismantle this product without authorization.
  7. Note that if the battery is not replaced properly, it may explode. Only the same or equivalent type of battery can be used for replacement.

The device has been evaluated to meet general F exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no F exposure calculation is needed.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference causer by unauthorized modifications or changes to this equipment. Such modifications changes could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules and with RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Airsmart Technology Co., Ltd. declares that the radio equipment type MW-PVXI is in compliance with Directive 2014/53/EU. The declaration of conformity may be consulted at our website, accessible from: www.muzenaudio.com

This product can be used across EU member states

Important Safety Instructions

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Clean only with dry cloth.
  6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  8. USB data transmission Users have to use the connection to USB interfaces with USB 2.0 version or higher.
  9. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Maintenance Regulations

Limited warranty: one year.
For warranty details, please visit www.muzenaudio.com or contact our local distributors.
Email: info@muzenaudio.com (Northern America Market)
support-ip@muzenaudio.com (Japan Market)
support-eu@muzenaudio.com (European Market)
Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
Address: Unit 616, Ant’s Union Start-up Accelerator, No.9, Keji Road, Nanshan Science and Technology Park, Yuehai Sub-district, Nanshan District, Shenzhen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals