MARKTRACE 2.4G RFID Tag For Assets Control User Guide
- June 1, 2024
- Marktrace
Table of Contents
MARKTRACE 2.4G RFID Tag For Assets Control
Product Information
Specifications
- Product Name: 2.4G RFID Tag
- Model NO.: MR3837C
- FCC ID: 2AJQV-MR3837C
- Effective Reading Range: Up to 400m (with reader model MR7901P, open air environment)
- Working Mode: Fixed frequency with powerful anti-jamming ability
- Working Band Design: Super wide, flexible in application development
- Tag Reading: Multiple-tag reading simultaneously without limitations
- Power Consumption: Ultra-low
Product Usage Instructions
1. Power On/Off
To power on the 2.4G RFID Tag, press and hold the power button for 3 seconds. To power off, repeat the same step.
2. Reading Tags
Place the RFID Tag within the effective reading range of the reader (up to 400m) for successful tag reading. Ensure no interference by other tags within the reading range.
3. Application Development
The RFID Tag is flexible in application development. Please refer to the user manual for software configuration details and industry rules compliance.
4. Maintenance
Keep the RFID Tag clean and free from dust or moisture. Avoid dropping or exposing it to extreme temperatures to ensure optimal performance.
FAQ
- Q: What is the average working current of the RFID Tag?
- A: The RFID Tag has ultra-low power consumption with an average working current. For specific details, refer to the product specifications or contact our support team.
- Q: Can multiple tags be read simultaneously without interference?
- A: Yes, the RFID Tag supports multiple-tag reading at the same time without limitations or interference by tag quantity within the reading range.
DESCRIPTION
- Product Name：2.4G RFID Tag
- Model NO.：MR3837C
- FCC ID：2AJQV-MR3837C
Key Features:
- Suitable to adopt fixed frequency working mode, with powerful anti-jamming ability;
- Effective reading range up to 400m (working with reader model MR7901P, open-air environment. depend on reader and antenna, software configurable);
- Super wide working band design, conforming to relevant industry rules and also flexible in application development;
- Multiple-tag reading at the same time, no limitation or interference by quantity in the reading range.
- Ultra-low power consumption， average working current<15uA
Parameters
| Model No | MR3837C |
|---|---|
| Operation frequency | 2402-2483MHz |
| Type | Beacon Type |
| Signal modulation | GFSK |
| Communication speed | 1Mbit/s |
| Inductive mode | Initiative Transmit, Transmit Every 1s |
| Output power | 7dbm |
| Material | ABS, Heat Resistant, |
| Communication speed | 1Mbit/s |
| Inductive mode | Initiative Transmit, Transmit Every 1s |
| Output power | 7dbm |
| Material | ABS, Heat Resistant, |
| Dimension | 40MM40MM10.8MM |
| Battery | Battery Life Up to 3 years |
| IP Grade | IP67 |
| Installation | Fixed installation, hidden installation, screw |
| Color | Gray |
| Weight | 14g |
| Unique ID | 4 bytes Data in HEX, Lester Marking |
| Battery model | CR2450 |
| Battery capacity | 550mAh/3V |
| Operating temperature | -20℃~+45℃ |
| Storage temperature | -30℃~+65℃ |
| Operating humidity | 10%～80% |
| Storage humidity | 10%～95% |
Dimension
Photos
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
References
- Active Rfid Tags,uhf Rfid Reader Manufacturers | Marktraceiot.com
- Active Rfid Tags,uhf Rfid Reader Manufacturers | Marktraceiot.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>