MUZEN MW-P11 Mini Green Bluetooth Speaker User Manual

MUZEN MW-P11 Mini Green Bluetooth Speaker

PACKING LIST

PRODUCT USAGE

1. Bluetooth indicator light
   When the indicator light is flashing, this means the Bluetooth function is ready for connectivity. Pair your device with “Muzen Button” Bluetooth option in your device Bluetooth control dashboard. Bluetooth will be successfully paired when the Bluetooth indicator light remains lit.

2. Power switch

   • Power on: move the function lever to the right side;
   • Power off : move the function lever to the left side;
   • Bluetooth reset : move the function level to the right side for 3 seconds. (This function may be utilized if connecting to another device is desired or if existing connectivity is experiencing issues.

3. Playlist switch function lever

4. Move to the last track: push the lever upward or to the left;

5. Move to the next track : push the lever downward or to the right.

6. Volume adjustment knob

   • Volume up : turn clockwise;
   • Volume down: turn counter clockwise;
   • Pause/Play: press the volume button shortly

7. Speaker
   This is where the sound originates. Please do not press hard.

8. Metal cover

9. Lanyard hole

10. USB charging port to re-charge the Button Speaker battery
    This product’s charging mechanism is through USB port. To charge the device, connect the USB cable to any USB enabled charging device. Charging progress is indicated with the color of light at the charge port located adjacent to the volume knob on the device. Red means the device is being charged, while green means the device is fully charged.

PRODUCT FEATURES

• Bluetooth Technology
• True Portability
• Superior Sound Quality
• Fashion Accessory
• Durability For Any Adventure
• Tool For Enhancing Experiences

Specifications

• Product model : MW-P11
• Product size: 63×47×30mm / 2.48 x 1.85 x 1.18in
• Net weight: about 130g / 0.29lb
• Bluetooth version: 4.2
• Bluetooth connection distance: 5m≤distance≤10m / 16.4ft≤ distance≤32.8ft
• Bluetooth RF Frequency Range : 2402MHz to 2480 MHz
• Bluetooth Maximum EIRP : < 10dBm Speaker: 40 3W
• Amplifier power : 3W
• SNR: ≥ 70dBA
• System frequency response: 120Hz-20KHz
• Battery: 3.7V/400mAh
• Charging port: Micro USB
• Charging voltage: DC 5V 1A

WARNINGS/CAUTIONS

Product use and other safety instructions:

1. Keep the speaker dry at all times.
2. Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
3. It is recommended that the product be kept in an environment that is between 4-45 C or 39.2-113 F. Don’t go outside of these temperature guidelines.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules and with RSS-247 of Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

SIMPLIFIED EU DECLARATION OF CONFORMITY

• Hereby, Shenzhen Airsmart Technology Co., Ltd. declares that the radio equipment type MW-P11 is in compliance with Directive 2014/53/EU.
• The declaration of conformity may be consulted at our website, accessible from: www.muzenau-dio.com
• This product can be used across EU member states.

Important Safety Instructions

1. Read these instructions.
2.  Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
10. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Maintenance Regulations

• Limited warranty: one year.
• For warranty details, please visit www.muzenaudio.com or contact our local distributors.
• Email: info@muzenaudio.com
• Manufacturer : Shenzhen Airsmart Technology Co., Ltd.
• Address: Unit 616, Ant’s Union Start-up Accelerator, No.9, Keji Road, Nanshan Science and Technology Park, Yuehai Sub-district, Nanshan District, Shenzhen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>