MUZEN Speed X TWS Bluetooth Earbuds User Manual

User Manual
MUZEN Speed X TWS Bluetooth Earbuds

Speed X TWS Bluetooth Earbuds

Dear Customers:
Thank you for choosing our products. This is the new MUZEN TWS Bluetooth earbuds, MUZEN upholds the value of “curiosity never dies”, with the mission of “shaping the imagination of future digital life”, advocating the spirit of loyalty to oneself, willingness to innovate, dare to taste the freshness of individuality, and strive to become a cool technology performance trendy game. Creation must be imagined, Cool, or Die!
A Gentle Reminder:
Please read this product manual carefully before using it for a better experience using the product.

Packing List

Product Operation Instructions

Earbuds Operation Instructions:

1. CD Speaker Part
2. Indicator Light Part
3. Operation Part

Bluetooth Pairing: When the earbuds are picked from the charging case, enter Bluetooth pairing mode and search for the Bluetooth name “MUZEN Speed X”.
Sleep Mode: When the earbuds are placed in the charging case, they enter deep sleep mode for charging.
Pick up Phone Calls: When a call is in progress, double click on the left or right ear to answer the call.
Note: When a call comes in, double-clicking on the left and right earbuds at the same time will result in a hang-up, which is normal.
Hang up: If you need to end a call in the middle of a conversation, double-click on your left or right ear to hang up the call.
Previous/Next song: While playing music, touch the left earbud for the previous song, and touch the right earbud for the next song.
Mode switch: Touch for 3 seconds to adjust the audio mode, following the sequence of “Music mode” -“Game mode” ­ “Video mode” to switch the audio mode.

Charging Case Operation Instructions:
4. Charging Case
5. Charging Indicator Light
6 Type-C Charging Port
7 Bluetooth Reset
Charging Case: Push up/Close down
Bluetooth reset: Press and hold the charging case reset button for 5-7s to reset the Bluetooth earbuds (earbuds must be in the compartment).

Charging Box Indicator Light Instructions:

1. Slide open/close the cover, the charging box indicator light will show the lighting effect;
2. Take the earbuds out of the charging compartment, the charging compartment indicator light will be on, it shows a green light when the battery z60%, blue light when the battery is around 21-60%, red light when the battery 20%, long light for 3s and then extinguished;
3. Put the earbuds into the charging compartment, charging compartment monitoring earbuds start charging, and the charging  compartment indicator lights up, it shows a green light when the battery 60%, blue light when the battery 21-60%, red light when the battery 20%, long light 3s after the charging indicator lights up, and then the light automatic extinguishing;
4. Charging effect: Insert the Type-C charging cable, the charging case begins to charge and the indicator light is on, it shows red light breathing flashing when the battery is 20%, blue light breathing flashing when the battery is 21-60%, and green light breathing flashing when the battery 60%, fully charged green light for login after all off.

Product Features

Metal body with aesthetic cut (exterior design)
The exterior design is a continuation of MUZEN’s infinite imagination of future concepts.
The aesthetics of the MUZEN earbuds are the same as before, with simple, cool lines that cut out the future of technology.
Long-wearing semi-in-ear earbuds
Weighing just 4.2g on one side, these earbuds are a lightweight way to enjoy the pleasures of semi-in-ear earbuds. With dual-microphone noise cancellation, Bluetooth 5.3 and a
special inductive touch position on the body, you’ll have an extremely smooth experience in no time.
Decompression rebound structure
Push open the lid and push away the anxiety and boredom.
The earbud compartment is made of a light metal material, which makes the lid feel more comfortable when it is rebounded.
Indulging in a world of sound and music
The sound of the vocals is subtle and realistic, and the bass is powerful.
Accessories for Cool outfit
A cool body in a range of colors. The top man in the workplace, but also the cool kid who is a maverick in the crowd.

Hardware Parameters

Charging Case Parameters
Product Model: MW-BSI
Charging Port: Type-C
Battery Capacity:400mAh
Earbud Parameters
Battery Life: Sh+
Charging Time:2h
Noise reduction mode: ENC pass-through noise reduction
Earbud Battery Capacity:35mAh
Earbud Frequency:20-20KHz

Important Notes
For your safety, please read the following instructions carefully and comply with them:

1. The manufacturer reserves the right to modify or adjust the specifications and details of the product without notifying users.
2. Please use the product in a dry environment wherever possible.
3. The product should not be placed near or in contact with exposed sources of fire.
4. IPX4-rated, but water and moisture resistance in daily use is still required.
5. This product can be used normally with an ambient temperature of 0-45°C. Do not use it outside of this range.
6. Do not modify, repair or dismantle this product without authorization, otherwise, no after-sales services are available.
7. The approval number is shown on the bottom of the product.
8. Consumers who use a power adapter to supply electricity should purchase a power adapter that is certified and meets the requirements of the standard.
9. Note that if the battery is not replaced properly, it may explode. If necessary, please visit a professional service center. After replacing the battery, the product will not be
   covered by the warranty.

Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Airsmart Technology Co., Ltd. Declares that the radio equipment type MW-B5I is in compliance with DIRECTIVE 2014/53/EU. The declaration of conformity may be consulted at our website, accessible form: www.muzenau­dio.com
This product can be used across EU member states

Product Pollution Index

Name and content of hazardous substances in the product

| Harmful substances
Parts|
| | | | |
| (Pb)| (Cd)| (Hg)| (Cr Nil)| (PBB)| (PBBS)
Structural components| 0| 0| 0| 0| 0| 0
Main Board| 0| 0| 0| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0
Cables| 0| 0| 0| 0| 0| 0
Speaker| 0| 0| 0| 0| 0| 0
Screws| 0| 0| 0| 0| 0| 0
Packages| 0| 0| 0| 0| 0| 0
This table is prepared in accordance with WT11364
0: indicates that the hazardous substance is present in all homogeneous materials of the component at a level below the limit specified in GB/T26572.
X: means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T26572.
Note: This product applies the concept of environmental protection design and effective control of hazardous substances, the “X” marking of hazardous substances is mainly due to technical limitations and cannot achieve the replacement of hazardous substances components.
The figures on this mark indicate that the product has an environmental life of 10 years under normal use.

About Us
Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
Address: Unit 616, Ant’s Union Start-up Accelerator, No.9 Keji
Road, Science and Technology Park, Nanshan
District, Shenzhen, China
Email: info@muzenaudio.com
Web:www.muzenaudio.com

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2ALXL-B5I
IC: 22608-B5I
Made in China

Prolinx Global LTD
27 Old Gloucester Street
London, WC1N 3AX, UK

Prolinx GmbH
Brehmstr.56, 40239 Duesseldorf
Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>