MUZEN Cyber Cube Portable Bluetooth Speaker
- June 6, 2024
- MUZEN
Table of Contents
MUZEN Cyber Cube Portable Bluetooth Speaker
Welcome to the MUZEN Family! Thanks for choosing us to accompany you on your
life adventure. Please read this manual carefully and make sure to follow the
relevant safety instructions before using it.
MUZEN Audio launches Cyber Cube, a high-performance trendy portable Bluetooth
speaker, based on the aesthetics of the new generation and the concept of
humanistic technology. The MUZEN Cyber Cube Bluetooth speaker with lighting
effects adheres to the company’s design philosophy of “Aesthetically pleasing,
Great sound, User-friendly and Entertaining”. It is our eternal pursuit to
make you enjoy the music and sound contents easier and better. Welcome to
explore your Cyber Cube with impressive sound and visual experience.
Tips:
This product is battery-powered, and you could use Type-C cable to charge it.
For a better experience, please charge it for about two hours with it powered
off before first-time use.
Packing List
- Speaker * 1
- Product manual * 1
- Type C charging cable *1
Speaker Operating Instructions
Bluetooth Indicator/Flashlight Window:
- Fast flashing warm white light: Ready for Bluetooth pairing
- Slow breathing warm white light: Bluetooth connected
- Steady white light: Flashlight on
Power Switch/Flashlight Control:
- Power on: Rotate counterclockwise and then hold for 3s
- Power off: Rotate counterclockwise (when device is on) and then hold for 3s
- Bluetooth reset: Rotate clockwise and then hold for 3s
- Flashlight on/off: Long press the power switch
- Flashlight mode (strong light weak light SOS) switch: Short press the power switch
Track Switch:
- Last track: Rotate counterclockwise
- Next track: Rotate clockwise
- Pause/Play: Short press
Volume Knob:
- Volume up: Rotate counterclockwise
- Volume down: Rotate clockwise
Light Effects Button/Control :
- Turn on/off light effects: long press
- Light Effects controlcontrol(gradual light –> breathing light–> > permanent light): short press
Loudspeaker:
For playing music.
Note: Fragile part. Please do not press this position hard.)
Light Effect Ring:
For light effects display
Strap hole:
Used for installing a strap.
charging port:
- Located under the cover for charging the device, T ype C port.
- While Charing: red light
- Fully charged: green light
Fidget Spinner (For Premium Version Only):
Fingertip rotatable spinner, palm plaything
Product Features
- A futuristic design that blends mechanics and space
- Subvert the traditional speaker design and feel the beauty of machinery.
- Design inspired by space futurism, every single painting detail makes sense.
- Music on your hand with palm-size, delicate and cool
- Surprisingly good sound and light effects
- Small plaything, great attention to detail and performance. Within square inch, the outbreak of sounds is surprising.
- MUZEN Cyber Cube portable Bluetooth speaker, once again dedicated to the amazing sound.
- Cool futuristic light effect design.
- Simple control with sentiments
- Simple control experiences with MUZEN knob designs and Bluetooth fast connection. By rotating, clicking, pressing, enjoy the music at your fingertips.
Hardware Parameters
-
Product model: MW PVXLI
-
Product size:
Standard Version: 60.8 mm (L) × 36.8 mm (W) × 77.9 mm (H)/2.4 in (L) ×1.5 in (W) ×3.1in(H)
Premium Version: 60.8 mm (L) × 41.2 mm (W) × 77.9 mm (H)/2.4 in (L) ×1.6 in (W) ×3.1in(H) -
Net weight:
Standard Version: About 230 g/0.51lbs
Premium Version: About 245 g/0.54lbs -
Bluetooth Version: 5.0
-
Bluetooth transmission range: distance ≤ 10 m/32.8ft
-
Loudspeaker: 4Ω 5W
-
Amplifier power: 5W
-
SNR: 70 dB
-
System frequency response: 80 Hz 18 kHz
-
Battery: 3.7V/1000mAh
-
Charging port: Type C
-
Charging voltage: DC 5V1A
Important Notes
For your safety, please read the following instructions carefully and comply with them:
- The manufacturer reserves the right to modify or adjust the specifications and details of the product without notifying users.
- Please use the product in a dry environment wherever possible.
- The product should not be placed near or in contact with exposed sources of fire.
- IPX5 rated, the product is protected against rain.
- This product can be used normally with the ambient temperature of 0 45°C. Do not use it outside of this range.
- Do not modify, repair or dismantle this product without authorization.
- Note that if the battery is not replaced properly, it may explode. Only the same or equivalent type of battery can be used for replacement.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- CAUTION RISK OF EXPOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Maintenance Regulations
Limited warranty: one year.
For warranty details, please visit www.muzenaudio.com or contact our local
distributors.
Email: [email protected]
Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
Address: Unit 616, Ant’s Union Startup Accelerator, No.9, Keji Road,
Nanshan Science and Technology Park, Yuehai Sub-district, Nanshan District,
Shenzhen
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.