MUZEN MW-Q1I Disco Portable Bluetooth Speaker User Manual

MUZEN MW-Q1I Disco Portable Bluetooth Speaker

Product Information

ON: Bluetooth has been connected
Power Switch| Power on: Move the slide switch backwards
Power off: Move the slide switch forwards
Volume Knob| Volume up: Turn the knob clockwise
Volume down: Turn the knob counterclockwise
Pause/Play: Short press
Last Track Button| Last track: Short press
Next Track Button| Next track: Short press
Next: Press the button once
Reset Bluetooth: Long press the last track button and next track
button simultaneously for 3s
Speaker| For music playback. (**Note: Fragile part. Please do not press
it hard)
Lanyard Loop| For lanyard installation
Charging Port| For device charge

Product Usage Instructions

1. Before the first use, it is recommended to charge the speaker for 2 hours.
2. To turn on the speaker, move the slide switch backwards. To turn off the speaker, move the slide switch forwards.
3. To adjust the volume, turn the knob clockwise to increase th volume and counterclockwise to decrease the volume. To pause or play music, short press the volume knob.
4. To play the last track, short press the “Last Track” button. To play the next track, short press the “Next Track” button. Pressing the “Next” button once will also play the next track.
5. To reset the Bluetooth connection, long press the “Last Track” button and “Next Track” button simultaneously for 3 seconds.
6. The speaker can be connected to Bluetooth devices with the name “MUZEN DISCO”. The Bluetooth indicator will flash when it can be connected and will remain on when connected.
7. Ensure not to press the speaker too hard as it is a fragile part.
8. Use the lanyard loop for lanyard installation if desired.
9. For device charging, use the provided charging port.

Packing List

Operating Instructions for Host

Functional guides
It is recommended to carry out the charge for 2h before the first use.

PRODUCT OVERVIEW

1. Bluetooth indicator:

   • Bluetooth name: MUZEN DISCO
   • Indicator flashing: The Bluetooth can be connected Indicator ON: The Bluetooth has been connected

2. Power switch:

   • Power on: Move the slide switch backwards
   • Power off: Move the slide switch forwards

3. Volume knob:

   • Volume up: Turn the knob clockwise
   • Volume down: Turn the knob counterclockwise
   • Pause/Play: Short press

4. Last Track Button
   Last track: Short press

5. Next button: Next Track Button

   • Next track: Short press
   • Next: Press the button once
   • Reset the Bluetooth: Long press the last track button and next track button at the same time for 3s

6. Speaker: For music playback. (**Note: Fragile part. Please do not press it hard

7. Lanyard loop: For lanyard installation.

8. Charging port: For device charge.

Product Features

• Music playing anytime and anywhere
  The shell of MUZEN DISCO is made of hard metal to achieve stable sound quality in a palm-like volume and explosive sound effects with a small body, to bring you a surprising music experiences.

• Convenient controls with a retro feel
  Adhere to the experiences of MUZEN knob controls and fast Bluetooth connection to provide you with the auditory feast from music with a simple operation.

Hardware Parameters

• Product model: MW-P6I
• Product dimension: 86mm (L) × 33mm (W) × 57mm (H)
• Bluetooth version: V 4.2
• Loudspeaker: φ33mm, 4Ω/3W
• Amplifier power: 3W*2
• Signal-to-noise ratio: ≥ 70dB
• System frequency response: 110Hz-20KHz
• MIC use distance: ≤ 0.05m (**Note: under the quiet surrounding environment) Battery: 800mAh /3.7V
• Charging port: Micro USB
• Charging voltage: DC 5V 500mA

Warnings/Cautions

1. Please use this product in a dry environment.
2. It is not allowed to place this product near any fire source or expose it to any fire source.
3. The product is not waterproof, which must be noticed during use and storage.
4. This product shall be used at an ambient temperature of 0-45℃ and it is recommended not to use it beyond this temperature range.
5. Do not modify, repair or dismantle this product without authorization.

Important Notes

• For your safety, please read the following instructions carefully and comply with them:

  1. The manufacturer reserves the right to modify or adjust the specifications and details of the product without notifying users.
  2. Please use the product in a dry environment wherever possible.
  3. The product should not be placed near or in contact with exposed sources of fire.
  4. This product can be used normally with the ambient temperature of 0‒45°C. Do not use it outside of this range.
  5. Do not modify, repair or dismantle this product without authorization, otherwise, no after sales services available. Important Notes
  6. Note that if the battery is not replaced properly, it may explode. If necessary, please visit a professional service center.
     After replacing the battery, the product will not be covered by the warranty.

• Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

• SIMPLIFIED EU DECLARATION OF CONFORMITY

• Hereby, Shenzhen Airsmart Technology Co., Ltd. Declares that the radio equipment type MW-Q1I is in compliance with DIRECTIVE 2014/53/EU. The declaration of conformity may be consulted at our website, accessible form: www.muzenaudio.com

• This product can be used across EU member states

About Us

• Shenzhen Airsmart Technology Co., Ltd
• Manufacturer: Shenzhen Airsmart Technology Co., Ltd
• Address: Unit 616, Ant’s Union Start-up Accelerator, No.9 Keji Road, Science and Technology Park, Nanshan District, Shenzhen, China
• Email: info@muzenaudio.com
• Website: www.muzenaudio.com

References

• Retro Portable Radio Mini Bluetooth Speaker | Muzen Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>