MUZEN MW-P11 Mini Portable Wireless Bluetooth Speaker User Guide
- June 14, 2024
- MUZEN
Table of Contents
MUZEN MW-P11 Mini Portable Wireless Bluetooth Speaker
PACKING LIST
- Button Speaker x1
- Speaker Charging Cable x1
- Lanyard x1
- Manual x 1
- Brand Brochure x1
- Sticker x 1
PRODUCT USAGE
-
Bluetooth indicator light
When the indicator light is flashing, this means the Bluetooth function is ready for connectivity. Pair your device with “Muzen Button”Bluetooth option in your device Bluetooth control dashboard.
Bluetooth will be successfully paired when the Bluetooth indicator light remains lit. -
Power switch
Power on: move the function lever to the right side;
Power off: move the function lever to the left side;
Bluetooth reset: move the function level to the right side for 3 seconds. (This function may be utilized if connecting to another device is desired or if existing connectivity is experiencing issues. -
Playlist switch function lever
Move to the last track : push the lever upward or to the left;
Move to the next track: push the lever downward or to the right. -
Volume adjustment knob
Volume up : turn clockwise;
Volume down: turn counter clockwise;
Pause/Play: press the volume button shortly
-
Speaker
This is where the sound originates.
Please do not press hard.
Do not press hard.
-
Metal cover
-
Lanyard hole
Used for fastening the lanyard.
-
USB charging port to re-charge the Button Speaker battery
This product’s charging mechanism is through USB port. To charge the device, connect the USB cable to any USB enabled charging device. Charging progress is indicated with the color of light at the charge port located adjacent to the volume knob on the device. Red means the device is being charged, while green means the device is fully charged.
PRODUCT FEATURES
- Bluetooth Technology
- True Portability
- Superior Sound Quality
- Fashion Accessory
- Durability For Any Adventure
- Tool For Enhancing Experiences
Specifications
- Product model: MW-P1|
- Product size: 63×47 ×30mm / 2.48 × 1.85 x 1.18in
- Net weight: about 130g / 0.29lb
- Bluetooth version: 4.2
- Bluetooth connection distance: 5m≤distance≤ 10m / 16.4ft≤ distance≤32.8ft
- Bluetooth RF Frequency Range: 2402MHz to 2480MHz
- Bluetooth Maximum EIRP: < 10dBm
- Speaker: 40 3W
- Amplifier power: 3W
- SNR: ≥ 70dBA
- System frequency response: 120Hz-20KHz
- Battery: 3.7V/400mAh
- Charging port: Micro USB
- Charging voltage: DC 5V=1A
WARNINGS/CAUTIONS
Product use and other safety instructions:
- Keep the speaker dry at all times.
- Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
- It is recommended that the product be kept in an environment that is between 4-45 C or 39.2-113 F. Don’t go outside of these temperature guidelines.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction, Federal
Communication Commission (FCC) Radiation Exposure Statement Power is so low
that no RF exposure calculation is needed.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to †rv to correct the
interference bv one or more of the followina measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules and with RSS-247 of
Industry Canada. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Shenzhen Airsmart Technology Co., Ltd. declares that the radio
equipment type MW-P1l is in compliance with Directive 2014/53/EU. The
declaration of conformity may be consulted at our website, accessible from:
www.muzenaudio.com
This product can be used across EU member states.
Important Safety Instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
Do not use this apparatus near water. -
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. -
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Maintenance Regulations
Limited warranty: one year.
For warranty details, please visit www.muzenaudio.com or contact our local
distributors.
Email: [email protected]
Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
Address: Unit 616, Ant’s Union Start-up Accelerator, No.9, Keji Road,
Nanshan
Science and Technology Park, Yuehai Sub-district, Nanshan District, Shenzhen