MUZEN Wild Go Portable Bluetooth Speaker User Manual
- June 5, 2024
- MUZEN
Table of Contents
MUZEN Wild Go Portable Bluetooth Speaker
Welcome to the MUZEN Family! Thanks for choosing us to accompany you on your life adventure. Please read this manual DE carefully and make sure to follow the relevant safety instructions before using it. MUZEN Audio is excited to launch the well-designed portable bluetooth speaker, Wild Go. The MUZEN Wild Go adheres to the PT company’s design philosophy of “Aesthetically pleasing, Great JA sound, User-friendly and Entertaining”. It is our eternal pursuit to make you enjoy the music and sound contents easier and better.
Reminder:
This product is battery-powered. For a better experience, please charge it for
about two hours with it powered off before first-time use.
Packing List
1
2
| Speaker x 1
Product Manual xl
---|---
3| Type C cable x 1
Speaker Operating Instructions
-
Bluetooth Indicator:
Flashing white light: Ready for Bluetooth pairing Steady white light: Bluetooth connected -
Power Switch:
On/off: long press Play/Pause: short press -
Volume Knob:
Volume up: Rotate clockwise Volume down: Rotate counterclockwise -
Track Knob:
Last track: Rotate clockwise once Next track: Rotate counterclockwise once -
Bluetooth reset:
Reset bluetooth: long press for 3s -
Loudspeaker:
For playing music. (**Note: Fragile part. Please do not press this position hard.) -
Strap hole:
Used for installing a strap. -
Charging port:
Located under the cover for charging the device
Product features
Wild and hardcore exterior design style
Overturn the traditional design and incorporate the heart of RU conquest.
Compact and smooth line design, every detail is worthy of taste. Palm size,
compact and rigid, carry with you, accompany you to ride the world.
Surprisingly good sound
Small plaything, great attention to detail and performance. Within square
inch, the outbreak of sounds is surprising. MUZEN Wild Go portable Bluetooth
speaker, once again dedicated to the amazing sound.
Simple control with sentiments
Simple control experiences with MUZEN knob designs and Bluetooth fast
connection. By rotating, clicking, pressing, enjoy the music at your
fingertips. Let enjoying music be like turning on the tap water, with music
flowing out at the flip of a switch.
Hardware parameters
- Product Model:MW-PVEI
- Product Size: 75.Sm m (L) x 35.Sm m (W) x 59m m (H)
- Net Weight:About 187g
- Bluetooth :V 5.0
- Bluetooth transmission range:distancelOm Loudspeaker:4O SW
- Amplifier power:4W
- NR: > 70dB
- System frequency response: 80Hz-18KHz
- Battery:3.7V/500mAh Charging Port:Type C
- Charging Voltage: DC SV::: lA
For your safety, please read the following instructions carefully and comply with them:
- The manufacturer reserves the right to modify or adjust the specifications and details of the product without notifying users.
- Please use the product in a dry environment wherever possible.
- The product should not be placed near or in contact with exposed sources of fire.
- IPXS-rated, the product is protected against rain.
- This product can be used normally with the ambient temperature of 0-45° C. Do not use it outside of this range.
- Do not modify, repair or dismantle this product without authorization.
- Note that if the battery is not replaced properly, it may explode. Only the same or equivalent type of battery can be used for replacement.
FCC STATMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, is not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This Class B digital apparatus complies with Canadian ICES-003. SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Shenzhen Airsmart Technology Co., Ltd. declares that the radio equipment type MW-PVEI is in compliance with DIRECTIVE 2014/53/EU. The declaration of conformity may be consulted at our website, accessible from: www.muzenaudio.com This product can be used across EU member states
Maintenance Regulations
- Limited warranty: one year
- For warranty details, please visit www.muzenaudio.com contact our local distributors.
- Email: [email protected]
- Manufacturer: Shenzhen Airsmart Technology Co., Ltd.
- Address: Unit 616, Ant’s Union Start-up Accelerator, No.9, Keji
- Road, Nanshan Science and Technology Park, Yuehai Sub-district, Nanshan District, Shenzhen, China