WI-PMS552F L2 Plus Managed PoE Switch

Product Information

Specifications

• Model: WI-PMS552F
• Type: L2+ Managed PoE Switch
• Ports: 48 x GE (PoE), 4 x 10G SFP+
• Power Supply: AC 100-240V, 50/60Hz
• Manufacturer: Wireless-Tek Technology Limited
• Website: www.wireless-tek.com

Product Usage Instructions

1. Package Contents

The package includes the following items:

• 48GE(PoE) + 4*10G SFP+ L2+ Managed PoE Switch (Model:
  WI-PMS552F)

• Quick Installation Guide

2. Appearance Overview

The WI-PMS552F features:

• 48 GE (PoE) ports
• 4 10G SFP+ ports
• Power Reset button

3. Installation

The device indicators and functions are as follows:

• LED Indicators:

  • PWR Indicator: Indicates device power status
  • SYS Indicator: Indicates system status
  • Data Indicator: Indicates data transmission status
  • PoE Indicator: Indicates PoE status
  • 10G Indicator: Indicates 10Gbps port status
  • Giga Indicator: Indicates 1000Mbps port status

• Power Supply: AC 100-240V, 50/60Hz

• Port Status:

  • Data Ports 1-48: Green LED for link status (up/down)

  • PoE Ports 1-48: Yellow LED for PoE status (working/not
    working)

  • 10G Ports: Indicates negotiated rate of 10 Gbps

  • Giga Ports: Indicates negotiated rate of 1000 Mbps

4. Login WEB UI

To access advanced management functions, log in to the Web-Based
UI by following the provided steps.

FAQ

Q: How can I reset the WI-PMS552F?

A: To reset the device, locate the PWR Reset button and press it
for a few seconds until the device reboots.

Q: Where can I find technical support for the product?

A: For technical support, you can contact Wireless-Tek
Technology Limited via their website, email, or telephone.

Q: What is the power supply requirement for WI-PMS552F?

A: The device is compatible with AC power input ranging from 100
to 240 volts at a frequency of 50/60Hz.

Quick Installation Guide
L2+ Managed PoE Switch

WI-PMS552F www.wireless-tek.com

48GE(PoE) + 4*10G SFP+ L2+ Managed PoE Switch

WI-PMS552F PWR Reset

1. Package Contents

Switch × 1

48GE(PoE) + 4*10G SFP+ L2+ Managed PoE Switch

WI-PMS552F PWR Reset

Quick Installation Guide
L2+ Managed PoE Switch

WI-PMS552F www.wireless-tek.com

48GE(PoE) + 4*10G SFP+ L2+ Managed PoE Switch

WI-PMS552F PWR Reset

Installation Guide × 1

Power Cord × 1

Mounting Accessories (hook × 2; mat × 4; screw × 8)

2. Appearance Overview
For WI-PMS552F
· Front panel
Reset 1 × Console Port LED indicator
48 ×10/100/1000Mbps PoE+ Ports 4 × 10G SFP+ Slots
· Back panel

48GE(PoE) + 4*10G SFP+ L2+ Managed PoE Switch

WI-PMS552F PWR Reset

WI-PMS552F PWR Reset

L428+GEM(aPnoaEg)e+d 4P*o10EGSwSitFcPh+

3. Installation
· Desktop installation
· Rack-mount Installation

· LED indicator
LED PWR Indicator SYS Indicator
Data indicator
PoE Indicator 10G Indicator Giga Indicator Power Supply Power Supply

On: the device power on is normal Off: the device is power off or failed
Blinking: device initialization On: device on and normal operation
1~48: (Data indicator is green) Off: ports link down On: ports link up Blinking: data on TX/RX
1~48 port: (PoE indicator is yellow) Off: PoE not working On: PoE working
On: The port negotiated rate is 10 Gbps
On: The port negotiated rate is 1000 Mbps
AC 100~240V 50/60HZ

Power port Grounding

4L82G+ EM(aPnoaEg)e+d 4P*o1E0GSwSiFtcPh+

WI-PMS552F PWR Reset

4L82G+ EM(aPnoaEg)e+d 4P*o1E0GSwSiFtcPh+

WI-PMS552F PWR Reset

4. Login WEB UI
For more L2+ management functions, please login the Web-Based Ul as the following steps:
Step 1. Find the lP address of the switch. · The default login lP address of this series switches is 192.168.0.1, with a subnet mask of 255.255.255.0.
· lf the switch receives an lP address from a DHCP server in your network.You can find this lP address on the DHCP server.
Step 2. Configure lP address on your PC to ensure that the switch and PC are in the same subnet · lf the switch uses the static IP address of 192.168.0.1, configure your PC’ s lP address as192.168.0.x (” x ” ranges from 2 to 254), and set the subnet mask as 255.255.255.0.
· lf the switch uses an lP address assigned by a DHCP server, set your PC to obtain an IP address automatically from the DHCP server.
Step 3. Launch a web browser on your PC. Enter the lP address of the switch in the address bar and provide the username and password. · The default login username and password are both “admin”.

Warranty Card
Username Address Telephone No. Purchase Shop Purchase Address Product Model No. Purchase Time Serial No. Dealer Signature
·If the product defects within three months after purchase, we will provide you a new product of the same model. ·If the product defects within the three- year warranty period, we will provide the professional maintenance service. ·Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty. ·Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damaged, warranty card losing will disqualify the product from limited warranty.

Technical Support

Company Website

Cloud Management

Wireless-Tek Technology Limited Address: Biaofan Technology Building 402, Bao’an street, Baoan District,Shenzhen City, Guangdong, China Website:www .wireless-tek.com Tel:86-0755-32811290 Email:sales@wireless-tek.com Technical Support:tech@wireless-tek.com

References

• Test and Measurement Equipment | Tektronix
• Wireless-Tek Technology Limited.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>