LINDY 43378 USB-C Laptop Docking Station User Manual

LINDY 43378 USB-C Laptop Docking Station

Specifications

• Model: DST-Pro 101 USB-C Laptop Docking Station
• Power Supply: 100W PSU
• Material: Aluminium body
• Ports: 3.5mm stereo output, 3.5mm stereo input, USB Type A (support up to 480Mbps)
• Features: Wake on LAN (WOL) support, MAC Address Pass-through

Product Usage Instructions

Power Supply Instructions

1. Attach the required IEC C13 mains cable for your country to the IEC C14 interface of the power supply.
2. Connect the DC connector of the power supply to the Laptop Docking Station.

Installation & Operation

Front

• Connect a headphone or speakers to the 3.5mm stereo output.
• Connect a microphone to the 3.5mm stereo input.

Rear

• Connect the USB Type C Male to Male cable between the docking station and the host computer.
• Connect USB Type A devices like a mouse or keyboard to the available ports.

Additional Information

• For multi-monitor setups, use identical monitors for best compatibility and performance.
• To use the MAC address pass-through feature, enable it in the BIOS settings of the host computer.

FAQ

• Q: Does the docking station require driver installation?
  A: No, this docking station does not require any driver installation for plug-and-play functionality.

• Q: What is the power capacity of the included power supply?
  A: The included power supply supports up to 100W, ensuring your device is always fully charged.

• Q: How do I enable the MAC address pass-through feature?
  A: To use the MAC address pass-through feature, access the BIOS settings of the host computer and enable it there.

DST-Pro 101
USB-C Laptop Docking Station

No. 43378
lindy.com

User Manual

Safety Instructions

WARNING !
Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.

To reduce risk of fire, electric shocks or damage:

• Do not open the product nor its power supply. There are no user serviceable parts inside.
• Only qualified servicing personnel may carry out any repairs or maintenance.
• Never use damaged cables.
• Do not expose the product to water or places of moisture.
• Do not use this product outdoors it is intended for indoor use only.
• Do not place the product near direct heat sources. Always place it in a well-ventilated place.
• Do not place heavy items on the product or the cables.
• Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

Attach the required IEC C13 mains cable for your country to the IEC C14 interface of the power supply. Then connect the DC connector of the power supply to the Laptop Docking Station.

Introduction

Thank you for purchasing the Lindy DST-Pro 101. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To  ensure correct use, please read this manual carefully and retain it for future reference.
The DST-Pro 101 was designed with pros in mind – it allows for easy, fast, and reliable charging of your device, ensuring you can perform power-hungry tasks with ease. Housed in a robust aluminium body, this  dock has been constructed to provide elite performance.

Extended Displays
This docking station comes with HDMI® and DisplayPort connections, all with 4k capability. With one extended display connected, you can expect Ultra HD 4k 60Hz. This product is also capable of supporting  2560×1440 60Hz for dual displays and 1920×1080 60Hz for triple display setups.

Multifunctional
Providing all the ports and card slot options you would need for a professional-grade workspace, this desktop delivers SuperSpeed USB ports as well as audio connectivity options. Through a single USB-C  connection, access several USB Type A ports, one USB-C ports, Card Readers (SD & Micro-SD), separate  3.5mm audio and microphone jacks, two HDMI® ports, a DisplayPort port and Gigabit Ethernet.

Powerful
With a 100W PSU (Power Supply Unit), this docking station has the capability to ensure your device is always fully charged and ready to deal with power- hungry, demanding tasks. Simply connect your docking  station with one USB-C cable and be confident that your laptop is being charged whilst you work. This also  leaves more available ports both on your device and docking station for connecting additional USB  accessories and peripherals.

Plug-and-Play
This docking station does not require any driver installation. This allows for seamless large-scale implementation and a hassle-free experience.

Package Contents

• USB Type C Laptop Docking Station
• USB 3.2 Gen 1 Type C cable (appr. 0.9m)
• 20V 5A IEC C14 Power Supply with DC connector (5.5mm/2.1mm)
• Four C13 mains cables (EU ‘Schuko’, UK, US, AUS)
• This Manual

Specification

• Host Interface: USB 3.2 / 3.1 Gen 1 / 3.0 (Type C), compatible with Thunderbolt 3/4
• Connects up to 3 displays to your laptop using a DisplayPort and 2 HDMI® connections
• Max. resolutions (Windows):
  • Single Display: 3840×2160 60Hz (DP or HDMI®)
  • Dual Display: 2560×1440 60Hz
  • Triple Display: 1920×1080 60Hz
• Max. resolution (Mac):
  • Single Display: 3840×2160 60Hz (DP or HDMI®)
  • Multi-Monitor Display is not supported when using a Mac
• 4 Port USB 3.2/3.1 Gen 1/USB 3.0 5Gbps Hub: 3x USB Type A and 1x USB Type C
• 2 Port USB 2.0 480Mbps Hub: 2x USB Type A
• Supports Gigabit Ethernet 10/100/1000Mbps
• 1x SD and 1x Micro SD slot
• 2x 3.5mm Audio port (1x in, 1x out)
• Power requirements: 25W
• Supports Power Delivery 3.0
• Supported Audio: Supports Audio Stereo
• Special Features: DisplayPort Alternate Mode, Supports MST for Windows, PXE (Preboot Execution Environment) and wake on LAN (WOL) support, Supports MAC Address Pass-through (this feature is dependent upon the compatibility of the hardware used in each set up)
• Compatibility: USB Type C or Thunderbolt 3/4 equipped computers with DisplayPort Alternate Mode support. Windows, macOS, Linux, Android, Chrome OS

Installation & Operation

Front

• 5Gbps: Connect USB Type A devices (support up to 5Gbps)
• : 3.5mm stereo output to connect a headphone or speakers
• : 3.5mm stereo input to connect a microphone
• SD/MicroSD: Card reader for SD and microSD cards

Rear

• LAN: Connect to a network LAN using a Cat.5e (or above) cable.
• DC 20V: Connect the included 20V 5A Power Supply to give power to the docking station and to the host computer. Please note that the host computer must support USB Power Delivery.
• 5Gbps: Connect USB Type C devices (support up to 5Gbps).
• Host: Connect a Type C source (i.e. laptop or tablet) using the included USB 3.2 / 3.1 Gen 1 Type C Male to Male cable. Please Note: Type C source connected must support DisplayPort Alternate mode. If the host computer supports USB Power Delivery, it can also be powered/charged through the connected power supply with up to 75W (the included power supply supports 100W, the Docking Station needs 25W for its operation).
• 5Gbps: Connect USB Type A devices (support up to 5Gbps).
• DP: Connect a DisplayPort monitor using a DisplayPort Male to Male cable.
• : Connect USB Type A devices like mouse or keyboard (support up to 480Mbps).
• HDMI®: Connect an HDMI® monitor using an HDMI® Male to Male cable.

For multi-monitor installations we strongly recommend using identical monitors to ensure the best compatibility and performance.
Connect the Docking Station to your laptop or tablet using the supplied USB 3.2 Type C cable. Next connect the displays using HDMI® and/or DisplayPort cables as required. Finally power on the displays and then connect the supplied PSU to the docking station.

Additional devices and peripherals can then be connected to the Docking Station as required.
To use the “MAC address pass-through” feature, the setting must be enabled in the BIOS. The location of the setting varies for each manufacturer. Change the setting to Enabled, then exit the BIOS while saving changes to the BIOS setting.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance. For the most up to date version of this manual, please refer to your local Lindy website, search for the relevant part number and find the manual under Downloads.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products

Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.

Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com, T: +49 (0)621 470050

Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England sales@lindy.co.uk,
T : +44 (0)1642 754000

Tested to comply with FCC standards.
For home and office use.

No. 43378
5th Edition, June 2024
lindy.com

References

• Lindy Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>