elinchrom Five Battery Monolight User Guide

elinchrom Five Battery Monolight

Speed up your workflow with the Elinchrom App / Software and take control of your light wherever you are.

• Control up to 20 units
• Save and reload presets
• Edit a friendly name
• Change group by drag & drop

Available on macOS, Windows, Android and iOS

FIVE CONNECTION

ERROR MANAGEMENT

Switch the unit off, wait 2 minutes and switch the unit on again. If the error shows up again the unit requires a check-up at an authorized Elinchrom Service Centre.

Charge timeout
Voltage unstable (Charge hold error)
Discharge circuit error
Overtemperature

SETUP MENU

1. Menu selected
2. Selected menu options
3. Menu option settings navigation
4. Exit menu navigation
5. Back

Knob Button :

Scroll the function to change setting/press the function to enter the menu option

CONTROL PANEL

MODELLING LAMP BUTTON

Long press to enter the menu. Press menu for Mode, VFC, Timer, Scale and CCT

DISPLAY PANEL – DASHBOARD

The colours of the upper bar correspond to the group number : blue for the group 1, orange for the group 2, red for the group 3 and green for the group 4 .

1. EL-Skyport synchronisation
2. EL-Skyport frequency channel and group number
3. Photocell status
4. Flash mode Action
5. Volume
6. Recycling time
7. Power setting in f-stop equivalents
8. Increase by 1 f-stop
9. Decrease by 1 f-stop
10. Flash duration value
11. The colour in the upper bar indicates the group
12. Battery status

www.elinchrom.com/range/app-software/
www.elinchrom.ch/support
www.elinchrom.com
Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND QSG FIVE – 73334 – 05.2022
Av. de Longemalle 11, CH-1020 Renens, Switzerland
Tel. : + 41 21 637 26 77 / e-mail: [email protected]

References

• Elinchrom | Support
• Elinchrom | What's your next adventure?
• Elinchrom | App / Software

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>