elinchrom ONE Off-Camera Flash User Guide
- June 3, 2024
- elinchrom
Table of Contents
elinchrom ONE Off-Camera Flash
Setup Menu
Settings
| Flash before ready| Yes/No
---|---|---
Flash scale| EL-Scale, 5.8 – 10 (10 scale),
Ws
Modlamp VFC| Off/On
Modlamp Timer| Off/15”/30”/60”
Modlamp Scale| F-stop/Percent
Favorite function| Modlamp/Flash mode/Audio/
Photocell/Recycling mode
Auto stand-by
| Off, 1 to 59 min.
Auto-off and auto stand-by shall be set inde- pendently. Auto stand-by cannot disable auto off.
Auto- off
| Off, (Auto stand-by+1) to 60 min.
It shall be longer than Auto stand-by. Minimum value = auto stand-by + 1min.
EL logo mode| Low, High, Off, Low on ready, High on ready
EL logo color| Group color, White
Ready tone| 1, 2, 3
Ready volume| Off, Low, Medium, High
Keyboard click| Off/On
Skyport| Off/On
Touch| Off/On
Wireless update| Setup wifi SSID and password
To access the menu short tap on screen with 2 fingers
Info
| Friendly name| Elinchrom ONE standard, can be changed with the
computer or smartphone app.
---|---|---
Firmware rev.|
Skyport ID|
Life time| In hours (hhhh:mm)
Power-on count| How many times the units has
been turned on
Flash count| Total flash number
Control panel / Touch Screen
Display panel – Dashboard
The colour of the Group corresponds to the group number : blue for group 1, yellow for group 2, red for group 3 and green for group 4.The Elinchrom logo on the side of the unit illuminates with the color of the selected group.
- Group 1-4
- Modelling lamp menu
- Battery status
- Favorite Function; default setting is Mod. Lamp on/off
- Power value
Modelling lamp
Screen Views
Work Screen
Shows the most important settings, once the unit is configured. Displayed
automatically after 45 sec of inactivity.
Sub-menu Screen
Select feature by scrolling.
Swipe left or right to change value between the arrows
Screen Lock
To activate the touch screen lock, press the Menu button, select the Setting wheel and go to Touch and select on / off
Connection
USB-C Charger
Use only the original Elinchrom One USB Charger to recharge the built-in Li-
Ion battery.
When the unit is OFF the side logo color shows the charge status: Red:
recharging
- Orange: almost charged
- Green: the unit is charged
- Recharging time: 100 min. to 100%
- Battery capacity min./max power: 9700 / 725 flashes per charged battery.
Reset To Default Settings
Switch the unit on, and release the ON button.
When the EL Logo appears press immediately the “ON” and“Menu” button for 4
seconds until the display shows “Reload all default parameters”.
www.elinchrom.com
Elinchrom is a registered trademark of ELINCHROM LTD, RENENS, SWITZERLAND
QSG ONE – 10.2022
Av. de Longemalle 11, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81
E-mail: support@elinchrom.ch
References
- Elinchrom | What's your next adventure?
- Elinchrom | What's your next adventure?
- Elinchrom | What's your next adventure?
- Elinchrom | Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>