elinchrom 210909 ONE Off Camera Flash User Guide
- June 6, 2024
- elinchrom
Table of Contents
ONE
Quick Start Guide
Setup Menu
Control panel / Touch Screen
Display panel – Dashboard
The colour of the Group corresponds to the group number: blue for group 1, yellow for group 2, red for group 3 and green for group 4. The Elinchrom logo on the side of the unit illuminates with the color of the selected group.
Modelling lamp
Screen Views
Work Screen
Shows the the most important settings, once the unit is configured. Displayed
automatically after 45 sec of inactivity.
Sub-menu Screen
Select feature by scrolling.
Swipe left or right to change value between the arrow
Screen Lock
To activate the touch screen lock, press the Menu button, select the Setting wheel and go to Touch and select on / off
Connection
USB-C Charger
Use only the original Elinchrom One USB Charger to recharge the built-in Li-
Ion battery.
When the unit is OFF the side logo color shows the charge status:
Red: recharging
Orange: almost charged
Green: the unit is charged
Recharging time: 100 min. to 100%
Battery capacity min./max power: 9700 / 725 flashes per charged battery.
Reset To Default Settings
Switch the unit on, and release the ON button.
When the EL Logo appears press immediately the “ON” and “Menu” button for 4
seconds until the display shows “Reload all default parameters”.
www.elinchrom.com
Elinchrom is a registered trademark of
ELINCHROM LTD, RENENS, SWITZERLAND
QSG ONE – 09.2021
Av. de Longemalle 11, CH-1020 Renens, Switzerland,
Tel. : + 41 21 637 26 77 Fax: +41 21 637 26 81
E-mail: [email protected]