elinchrom EL26647 Rotalux Octabox User Manual
- June 6, 2024
- elinchrom
Table of Contents
USER MANUAL P.02
Rotalux
Introduction
Dear Photographer,
Thank you for buying the Elinchrom Rotalux Softbox. All Elinchrom products are
manufactured using the most advanced technology. Carefully selected components
are used to ensure the highest quality and the equipment is submitted to many
tests both during and after manufacture. We trust that it will give you many
years of reliable service.
Please read the instructions carefully, before use, for your safety and to
obtain maximum benefit from many features.
Your Elinchrom-Team
Characteristics
The easy mounting Rotalux system is probably the most widely copied of all
Softbox systems. However, it is easier to copy a design than a quality and
they remain the best units in their class.
What continues to make the Elinchrom units unique are the optional sets of
deflectors – gold, silver, frosted and translucent that enable the
softness/hardness and colour to be modified; fitting centrally over the flashtube
at your chosen distance. Folding down like an umbrella, they are easily
transported or just kept clean, in their included carrying bag.
Rotalux Speedring with improved mechanics and extremely lightweight, only 370
g. Improved finish of the Rotalux reflector tissue with grey piping for better
light efficiency. 360° revolving system. Folds down like an umbrella, without
dismounting the softbox. A carrying bag for a folded Rotalux is included.
Optional Rotagrids to control the light spread, are available for all Rotalux
sizes.
Speedrings adapter for other flash brands such as * Broncolor ®, Profoto ®, OCF
Bowens ®, Hensel ®, AlienBees ®, Comet®, Photona®are available.
Security Advise
The maximum modelling lamp wattage for all Rotalux softboxes is limited to
300W. Ensure that the Rotalux is correctly assembled and locked to the flash
unit.
The unit, the flash tube and accessories may become very hot during and after
use! To avoid injuries, handle with isolating cloth or wait until parts have
cooled down.
Even though we use fire retardant materials the fabric should never get in
contact with the hot flash tube or the modelling lamp.
The metal speedring and the locking knob for the revolving system may heat up
enormously when the flash unit is used at maximum power levels of the flash and
modelling lamp. Please wait until the parts have cooled down, before packing
away.
Always switch the flash unit off before fitting or exchanging reflectors and
softboxes.
Ensure that the ventilation system of flash units is working correctly.
Double-check that the internal fabric diffuser is correctly fitted and does not
make contact with the hot flash tube and the modelling lamp.
Lower the modelling lamp power and reduce the number of flashes per minute,
when small size softboxes are used. The reflective surface is very close to the
modelling lamp/ flashtube. The fabric can be damaged by excessive heat.
*Broncolor®, Profoto®, Bowens®, Hensel®, AlienBees®, Comet®, Photona®are protected trademarks that do not belong to Elinchrom LTD.
Rotalux Speedring versions with two locking options
Some Speedrings offer a second thread (locking option) at the rear side, for
the OCF mount, which could be used mainly with Rotalux HD versions with Velcro
opening at the Speedring side.
Note: Of the two threads, visible on the front and rear side of the ring,
only one will block the rotating option!
|
---|---
Standard screw rotation lock for all Rotalux softboxes| Optional thread to
lock rotation, mainly with OCF mount.
Rotalux Speedring
Use the colour marks to build your Rotalux softbox depending on your product model. The universal speedring is the same for all units.
| |
---|---|---
STRIP
Red Marks
35 x 100
50 x 130| SQUARE
Blue Marks
70 x 70, 100 x 100,
60 x 80, 90 x 110| OCTA
All
1.
Assembling the Rotalux Softbox:
A) Place the speedring with the locking knob at the top on a firm horizontal
surface.
B) Pull out each of the rod sockets and move them into the 90° vertical
position and release.
C) Place the speedring in the centre of the reflection fabrics.
D) Ensure that the slots of the rod sockets coincide with the seams of the
reflection fabrics.
E) Insert the bare ends of the rods into the sockets of the Speedring.
F) One at a time bend rods opposite outwards, applying gradual pressure on the
capped end to give slight curvature. Manipulate the respective capped ends to
fit into the cloth pockets at the coinciding corners of the reflection fabrics.
If necessary, readjust as shown in picture 1.D.
G) The rods fixed at both ends, have now a convex curve. Hold the rod and twist
each to make the curve concave.
H) Hold down the Speedring in a fixed position. One at a time applies pressure
on the rods near the rod socket. The rod sockets return to the previous
horizontal position and lock. The reflection fabrics now acquire a concave
tent-like curvature.
I) The Rotalux Softbox is now ready to be mounted on the flash unit.
2.
Mounting the Rotalux Softbox on the Elinchrom flash-unit:
A) Turn the locking ring of the flash unit (mounted on the tripod), anti-
clockwise to unlock the bayonet. Remove the protective cap from the flash unit
anti-clockwise.
B) Ensure that the locking knob on the Speedring is tightened (see 2. C).
Insert the Rotalux speed ring and turn clockwise. It clicks into place.
Turn the locking ring clockwise to lock the bayonet with the Rotalux Speedring
attached.
C) The angle of the Rotalux softbox can be adjusted with the revolving system.
Unlock the locking knob of the Speedring and turn the softbox into the desired
position. Make sure that the Speedring is locked in the bayonet of
the flash unit whilst turning the softbox.
NOTE : The Speedring and the locking knob may become hot when the Rotalux
is in use. Protect your hands with heat resistant gloves and switch off the
unit and disconnect it from the mains, when you need to adjust the softbox
angle.
D) Attach the diffuser to the softbox.
E) Fix the diffuser with the Velcro tapes along the softbox sides and edges.
Download the user manual
Please get the user manual in other languages at this link: http://bc.gs/41
http://bc.gs/41Elinchrom SA Rotalux 05.2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>