Elinchrom Bridge User Manual
- June 7, 2024
- elinchrom
Table of Contents
User Manual
Elinchrom Bridge
NOTE:
Check for product updates before using! Download the EL-Updater to update the
Bridge:
https://www.elinchrom.com/support_downloads.php?q=software+updater
ELINCHROM BRIDGE CHARACTERISTICS
The Elinchrom Bridge is a small and robust bridge between your EL flash units and your computer or mobile devices MAC / WIN or iOS / Android operating systems.
It implements Bluetooth standards for easy pairing with mobile devices for IOS and Android and a new EL-Skyport software compatible with MAC or WIN operating systems via the USB connection. The Elinchrom Bridge enables you to use all the remote control features available with the new EL-Skyport Application for IOS or Android or either with Mac and WIN software.
The EL-Bridge is compatible with EL flash units with built in EL-Skyport receiver (Ranger Quadra RX, BRX family, D-Lite RX family, ELB family, ELC family). Style, Ranger RX, Digital RX with the Transceiver RX are not supported.
The Elinchrom Bridge comes with ¼” thread, which can be mounted anywhere in the distance range of your mobile device. There is a USB connection for power supply, firmware updates and to connect the Bridge directly with a computer to control enabled flash units.
TECHNICAL DATA
Overview
FRONT VIEW
BACK VIEW
OPERATION INSTRUCTIONS
TO SWITCH ON/OFF THE ELINCHROM BRIDGE
To switch on the Elinchrom Bridge, press and hold ON/OFF (or power) button at least for one second until the white LED will light up to indicate the switching process (now release the button).
After that, the LED flashes in GREEN color, indicating that the system is ready and waiting for the Bluetooth connection.
Once a Bluetooth connection is established, the LED will flash in BLUE.
When the Elinchrom Bridge is connected via USB cable to a computer, the LED flashes GREEN and is ready to operate the Elinchrom Studio software.
Switch OFF procedure is almost the same: press and hold “ON/OFF (or power)” button at least for one second, until the LED becomes white, then release and the system will shutdown.
HOW TO OPERATE
IOS / Android
- Install the Elinchrom App on your mobile device
- Switch the Bridge on.
- Open the Elinchrom APP
- The BLUE LED will light up on the Bridge and the App can scan now for compatible EL flash units.
MAC / WIN
- Install the Elinchrom Studio software on your computer
- Connect the Bridge via the USB connection with a cable
- Open the Elinchrom software
- The GREEN LED will light up on the Bridge and the software can scan now for compatible EL flash units.
HOW TO CHARGE
To charge the Elinchrom Bridge please connect it to your computer with a micro-USB cable (included). Alternatively, use the optional charger (International Charger Kit, article code 19276. Not included).
FIRMWARE UPDATE
To update your Elinchrom Bridge, simply press ON/OFF button for at least 5 secs. The white LED will light up to indicate the switching process, continue to hold power button until the LED lights up in yellow and flashes two times each second, meaning the Bridge is ready for updates. Download the EL Updater software and follow the instructions.
TROUBLESHOOTING
LEGAL INFORMATION
FCC CLASS B COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ television technician for help.
Modifications: Changes or modifications not approved by ELINCHROM LTD can void the user’s authority to operate the equipment.
Industry Canada (IC) Compliance Notice
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device
CE MARKING
The shipped version of this device complies with the requirements of European
Directives related with it, therefore it is marked with the CE conformity
logo. For more information and to download the European Declaration of
Conformity of this product, please, visit our website
http://www.elinchrom.com/support_downloads.php
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>