Wi-Tek WI-PE31E PoE Extender Installation Guide
- September 15, 2024
- Wi-Tek
Table of Contents
Wi-TekWI-PE31E PoE Extender
Specifications
- Model: WI-PE31E | WI-PE51E | WI-PE31G | WI-PE51G | WI-PE21E | WI-PE21G
- Ports: 4GE(PoE)+1GE(PD) Gigabit PoE Extender, 6 Ports 100Mbps PoE Extender
- Input: 1 x 100Mbps PoE+ Input DC Input 37-57V, 1 x 1000Mbps PoE+ Input DC Input 37-57V, 1 x 10/100Mbps Hi-PoE input port
- Output: 4 x 100/1000Mbps PoE+ output ports, 1 x 100/1000Mbps PoE+ output port, 4 x 10/100Mbps PoE+ output ports
Product Usage Instructions
Installation
Follow these steps to install the PoE Extender:
- Connect the DC input within the specified voltage range.
- Connect the PoE input port to the power source.
- Connect the PoE output ports to the devices you want to power.
DIP Switch Settings
Configure the DIP switches based on your requirements:
- On: Transmission up to 250m at limited rates. Off: Transmission up to 100m with specified rates.
LED Indicators
Understand the LED indicators for device status:
- PWR (Power indicator): Indicates power status.
- Link Indicator: Shows link connectivity status.
- PoE Indicator: Displays PoE functionality status.
FAQ
-
Q: What is the maximum transmission distance supported by the PoE Extender?
A: The maximum transmission distance can vary based on the model and DIP switch settings. Typically, it can support up to 250m with limitations. -
Q: How do I know if PoE is functioning correctly?
A: Check the PoE Indicator LED. If it is on, PoE is working; if off, there might be an issue with PoE functionality. -
Q: What does the VLAN mode signify?
A: The VLAN mode enables or disables VLAN functionality on the PoE Extender for network segmentation purposes. -
Q: Can I extend the transmission rate beyond the default settings?
A: The DIP switch settings allow you to extend transmission distances but may limit the transmission rate accordingly.
Quick Installation Guide
PoE Extender
WI-PE31E | WI-PE51E | WI-PE31G | WI-PE51G | WI-PE21E | WI-PE21G
www.wireless-tek.com
Packing Content
Appearance Overview
WI-PE31E
WI-PE31 E DIP Switch Description
Extend
- On: The transmission of PoE output ports can be up to 250m, but the rate is limited to 10Mbps
- Off: The transmission of PoE output ports can be up to 100m with 100Mbps (WI-PE31G transmission rate can reach 1000Mbps)
WIPE31G
WI-PE51G
WI-P51 E
WI-PE21G
WI-PE21E
Installation
Desktop Installation
Wall-mount Installation
Network Application
Networking Solution (illustration for WI-PE31E)
- Step 1: Connect the first PoE extender to the PoE port of switch which is compatible with 802.3af/at/bt.(Or connect a DC adapter to power up the first PoE extender)
- Step 2: Connect the second PoE extender to the first PoE extender via PoE input port.
- Step 3: Connect an IP camera to the second PoE extender via PoE output port.
Note: Recommend no more than 4 units PoE extender in one network.
Warranty Card
Username|
---|---
Address|
Telephone No.|
Purchase Shop|
Purchase Address|
Product Model No.|
Purchase Time|
Serial No.|
Dealer Signature|
- If the product defects within three months after purchase, we will provide you a new product of the same model.
- If the product defects within the three-year warranty period, we will provide the professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disaster, water damage, extreme thermal or environmental conditions. sticker damaged, warranty card losing will disqualify the product from limited warranty.
Wireless-Tek Technology Limited
Address: Biaofang Technology Building 402, Bao’an street, Baoan
District,Shenzhen City, Guangdong, China
Website: www.wireless-tek.com
Tel:86-0755-32811290
Email: sales@wireless-tek.com
Technical Support: tech@wireless-tek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>