Treevol Furniture WHFP046 Floating Nightstand Flopini Installation Guide
- September 13, 2024
- Treevol Furniture
Table of Contents
WHFP046 Floating Nightstand Flopini
“`html
Specifications
- Product: Floating Nightstand
- Model: Not specified
- Material: Not specified
- Dimensions: Not specified
- Weight Capacity: Not specified
Product Usage Instructions
What You Will Need
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- Optional: Electric screwdriver
Assembly Steps
1. Verify Parts
Check that you have all the necessary panels and hardware as
listed in the manual.
2. Wood Dowels Assembly
Insert wood dowels into the designated holes on the panels and
gently hit them until fully inserted.
3. Minifix System Assembly
Insert Minifix cams with the arrow pointing towards the drilling
on the panel’s edge. Secure with spreading bolts.
4. Cabinet Assembly
Follow the provided diagrams to assemble the panels together
using the dowels and Minifix system.
5. Drawer Slides Installation
Attach the drawer slides according to the instructions provided
in the manual.
Care Instructions
Follow the recommendations in the manual to ensure the longevity
of your cabinet.
FAQ (Frequently Asked Questions)
How much weight can the cabinet resist?
The weight capacity of the cabinet is not specified in the
manual. It is recommended to avoid placing excessive weight on
it.
Can I use an electric screwdriver for assembly?
An electric screwdriver is optional but can make the assembly
process easier and faster.
What should I do if I lose a piece from the hardware bag?
It is crucial not to lose any components from the hardware bag,
as they are necessary for assembling the cabinet. Contact customer
support for replacement parts if needed.
“`
ASSEMBLY INSTRUCTIONS
FLOATING NIGHTSTAND
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5
Let’s start assembling!
6
How much weight does your cabinet resist?
18
Our last recommendations for taking care of your cabinet
19
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x1 I – x1 M – x1
B – x1 F – x1 J – x1
C – x1 G – x1 K – x1
D – x1 H – x1 L – x1
3
What’s in the hardware bag?
Wood dowel
x11
Spreading bolt
x22
Minifix cam
x22
Cover caps
x24
2″ 1″ 2 1/2″
Slides + screws
x1
Drywall screw
x6
Drywall screw
x6
Wall anchor + screw
x2
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet. 4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
Turn this panel over
D D
2
G
Turn this panel over
G
6
3
E
4
G E
7
5
G
E D
Drywall screw 2″
6
A
8
7
M
8 Drawer slides installation (apply for steps 8 and 10)
To begin, you must take out the smaller part of the slide, pushing down the
black plastic part shown below:
Take the bigger part of the slide and place it
2
11
over the panel. The
plastic stop shoud go
towards the back.
C
Front
Front
9
9
M
A
C
10
If you want to recall how to
11
2
install this part of the slides,
go to the 8th step again.
B
10
11
B
M
A C
12
EG D M
C B
A
11
13
F
14
F EG
D B
A
12
15
Take tha smaller part of the slide and place it over the panel. The metallic
stop
should go at the front.
Front
H
16
Front
Front
I
13
17
Drywall screw 2″
H
J
I
18
Slide the back panel inside the grooves.
H
J
I
L
14
19
K
20
H
J
L
I
K
15
21
22
L K
H
Drywall screw 1″
Slide the drawer inside the cabinet.
F
G
D
H
J
B
LI
K
16
23
Fix your cabinet to the wall
1 On the wall, measure and mark the points shown below. 2 Drill on the
markings with a 5/16″ drill bit. 3 Insert the wall anchors inside the
drillings. 4 Place the cabinet and secure it with the screws.
2.5
3.8
6.3
3.8
G
G
18.5
Height measurement may vary according to the needs of the user.
*Dimensions in inches
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
17
How much weight does my cabinet resist?
11
2,2
11
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
18
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
F
EG
D
C
M
B A
H
J
L
I
K
19
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 1 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in
the lot number printed on the product box and the assembly instructions
leaflet. Warranty covers materials and workmanship imperfections which impair
the assembly or correct functioning of the cabinet. This warranty is not valid
if the defects or imperfections are caused by the incorrect following of the
assembly instructions, warnings and recommendations, misuse, intentional
damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized, when it´s been assembled 3 months after
the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will
not be responsible for defective and/or damaged parts. This warranty is ONLY
valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been
resold, rented, etc. Furniture will take no liability for incidental or
consequential damages caused to or by the product (This may not apply in your
state). To make this warranty valid you must write to our customer service
email describing the product defect, lot number and submitting your sales
reciept or proof of purchase, or contact us at our customer service line.
Replaced parts will be under the product´s original warranty coverage period.
Damaged parts will become property of the company. There are no other
warranties applicable to this product.
20
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>