Sunnydaze DECOR QX-047 Steel Log Rack Bracket Kit Instruction Manual
- October 30, 2023
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR QX-047 Steel Log Rack Bracket Kit
Product Information
Steel Log Rack Bracket Kit
The Steel Log Rack Bracket Kit (QX-047) is a set of two brackets and end plates that can be used to assemble a log rack for the storage of firewood. The kit comes with M4x25mm screws, a sealing strip, and instructions for assembly. The user needs to provide the lumber (not included) required for the length and height of the rack. The bracket slots are designed for nominal-size lumber, which may need to be planed or sanded to fit. Additional brackets or bracing may be required for vertical lumber that is taller than 4 feet. It is important to not use lumber that is cracking or checking. The Steel Log Rack Bracket Kit is easy to assemble and provides a sturdy and durable storage solution for firewood. However, it is important to follow the instructions carefully and ensure all screws are securely fastened before use. The manufacturer and seller disclaim any liability resulting from improper use, attachment, inadequate maintenance, or neglect of the product.
Product Usage Instructions
- Assemble the Steel Log Rack Bracket Kit on a soft, clean surface to avoid scratching or damaging the finish.
- Inspect the packaging to ensure all parts are accounted for before disposing of packing materials.
- Review all information and understand assembly before beginning.
- Provide two equal pieces of lumber for the length of the rack and four pieces for the height of the rack (not included).
- Carefully measure sealing strip before cutting.
- Use 32 M4x25mm screws to attach the brackets and end plates to the lumber:
- Drive screws at a low speed.
- Ensure screws are installed straight.
- If screws are not penetrating the lumber, drill a pilot hole.
- Ensure all screws are securely fastened before use.
- Periodically check and tighten screws as necessary.
- Do not use lumber that is cracking or checking.
- Additional brackets or bracing (not included) may be required for vertical lumber that is taller than 4 feet.
- Any modification to the product or failure to follow recommended care will void the product warranty.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty. If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: [email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
Assemble on a soft, clean surface to avoid scratching or damaging the finish. Save this document for future reference.
What in the Box
- Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
Parts
WARNING: CHOKING HAZARD—This item contains small parts that can be swallowed. Keep children and pets away during assembly.
NOTE: Lumber (not included) is nominal size and may need to be planed or sanded to fit inside the bracket slots.
Tools
Required (not included)
Required (not included)
2×4 Lumber
Power Drill with Phillips Drill Bit
Scissors
Tape Measure
Safety Glasses
WARNING: Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
ASSEMBLY
Review all information and understand assembly before beginning.
HELPFUL HINTS
Lumber required (not included): two equal pieces for the length of the rack, four pieces for the height of the rack.
NOTE: Additional brackets or bracing (not included) may be required for vertical lumber that is taller than 4 feet.
- Lumber is nominal size and may need to be planed or sanded to fit inside the bracket slots.
- Do not use lumber that is cracking or checking (splits in the length of the wood).
STEP 1
- A: 2
- D: 1
TIP: Carefully measure sealing strip before cutting.
STEP 2
- C: 8
TIPS: Drive screws at a low speed. Ensure screws are installed straight. If the screws are not penetrating your lumber, drill a pilot hole.
-
STEP 3
-
- C: 16
-
STEP 4
- B: 2
- C: 8
Any modification to the product or failure to follow recommended care will void the product warranty.