FOSHAN HKD-MIR01-XXYY Smart Mirror Instruction Manual

****

FOSHAN HKD-MIR01-XXYY Smart Mirror

IMPORTANT
Handle with care, impact can damage the mirror. Please don’t lean the mirror against the wall or tile or floor which may cause chips on corners or edges easily

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using or installing this product.
When using an electrical furnishing, basic precautions should always be followed, including the following:

DANGER
To reduce the risk of electric shock:

1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.

   ---

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Unplug from outlet before putting on or taking off parts.
2. close supervision is necessary when this furnishing is used by. or near children, invalids, or disabled persons.
3. Use this furnishing only for its untended use as describes in these instructions. Do not use attachments not recommended by the manufacturer.
4.  Never operate this furnishing if it has a damaged cord or plug. if it is not working properly, if it has been cropped or damaged, or dropped into water Return the furnishing to a service center for examination and repair.
5.  Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7.  Do not use outdoors.
8.  Mount furnishings at the correct height.

WARNING To reduce the risk of electric shock,
this furnishing has a polarized plug (one blade is wider than the other). This plug will fit in a polarized  outlet only one way. if the plug does not fit fully in the outlet, reverse the plug. if it  still does not in, contact a qualified electrician to install the proper outlet. Do not  change the plug in any way.

Specifications

• Electrical Service  120V/60Hz, 0.8A

User-Maintenance Instructions

User-maintenance instructions shall include:

1. Instructions for cleaning and user maintenance operations specified by the manufacturer, such as lubrication or non-lubrication, and a statement to the user that any other servicing is to be performed by an authorized service representative or that the furnishing has no user serviceable parts.
2. Instructions for a furnishing employing an automatically reset thermal limiter that shuts off the entire furnishing shall inform the user what to expect when the thermal limiter operates.
3.  Specific instructions for the proper method of storage of the cord, the total furnishing, and similar components, when the furnishing is not in use, and for care of the cord while in use.

You will need
To assemble your product (Tools not provided).
Electrical Safety installation Information

PLEASE NOTE:

•  All electrical products should be fitted by a suitably qualified electrician in accordance with national wiring regulations.
•  Ensure mains power supply is switched off before starting any electrical installation.
•  Before drilling, ensure there are no hidden cables or pipes in the wall.
•  Wear suitable eye protection when drilling.
•  Be careful when using power tools near water.

Wall Types

•  Fixing supplied are generally for solid wall.
•  For Dry walls, purchase suitable fixings.
•  If fitting on tiles, use a ceramic drill bit and insert wall plugs below the tile.

Installation Instructions

1.  Determine the location of the mirror. A=Distance between the hangers
   B=Hole points for brackets
   C=Distance from top to the brackets
   

2. Position the holes with paper card and mark wall.
   Drill holes insert wall plugs and fit brackets (Maximum tightened).

3. Connect to Mains supply.
   A. Plug in
   If there is available socket on the wall, then just plug in.

B. Hardwired
If there is only wire on the wall, then cut the plug and hardwire the mirror, See the following diagram.
Wiring Diagram.

4. Place mirror   on the brackets fitted and switch on.

• Hook on the mirror
• Bracket on the wall

Bluetooth Speaker

• Bluetooth Version:  V5.0
• Input Voltage:      DC12V
• Power:                  2.5W+2.5W
• Impedance:        4Ω+ 4Ω
• Frequency:        150Hz~8kHz
• Channel:            2 channel

To use the Bluetooth Speaker, you need to pair it with your phone. Pairing creates a stored link between your phone and the Bluetooth Speaker. Once paired, they will reconnect automatically in future.

Smart Mirror Operation

The definitions of these buttons

1.  White light ON/OFF
2.  Brightness adjustment
3. Color temperature adjustment

| Night light ON/OFF
| Phone call answering functionality
| Anti-fog ON/OFF
| Time display

1.  Click the button to turn White light ON/OFF. Double-click the button  to adjust color temperature. Long press the bottom  to adjust brightness.

2. Short press the bottom to turn Night light functionality ON/OFF.
   Note:
   Night Light Functionality on does not mean that night light is on. When the situation is dark enough, night light will be on.

3.  Short press the bottom to answer the call. At this time, user can talk  through mirror. Short press  once, the talk switches to cell phone. Long press  to hang up the phone. Note: To use phone call answering functionality, your phone has to be Bluetooth connected with your smart mirror.

4.  Short press the bottom to turn Anti-fog function ON/OFF.
   （Hand Operation）

• a） Turn On White Light
  Swipe your hand in front of (infrared sensor)once. At this time, (White Light logo) turns to white from blue. At this time, (night light logo) turns from white to blue. Note：
  When Night light is on, white is off. When white light is on, night light is off.

• b） Turn On Night Light
  When White Light is on, swipe your hand in front of (infrared sensor). At this time, (night light logo) turns to white from blue. Night light functionality is active. When the room is dark  enough, night light is on. When  (white light logo) turns to blue  from white. White light is off.

• c） Adjust Brightness of White Light
  When white light is on, a hand stays in front of , infrared sensor. At this time, brightness will change from brightness to darkness. If hand leaves ,the infrared sensor, brightness stops adjusting.

• d） Color Temperature Adjustment
  When white light is on, swipe your hand twice in front of (the infrared sensor)back and forth. Color Temperature will change among, 3000K, 4000K or 5000K.

• e） Turn off White light and Night Light
  When Night Light functionality is active, a hand stays in front of ( the infrared sensor) about 2 seconds, (white light logo)and, (night light logo) will be off. At this time, if a hand swipe in front of the (infrared sensor) white light logo turns to white, white light is on.

• f） Time Adjustment
  When Anti-Fog Functionality is off, long press （anti-fog  logo）for three seconds. At this time,  ( anti-fog logo)and  (phone call answering logo) flash in blue,and first two digit flashes in blue, entering hour adjustment mode. Hour  adjustment by pressing  ( anti-fog logo)or  (phone call  answering logo).

Customers complete hour adjustment, and after 5 seconds, ,first two digit stops flashing and last two digits flashed in blue, entering minute adjustment. .Minute adjustment by  pressing ( anti-fog logo)or (phone call answering logo) When customers complete minute adjustment, and 5 seconds later,  quit time adjustment. At this time,  stop flashing, and  (white light logo) and  (night light logo) stops  flashing.

Federal Communication Commission (FCC) Statement

This  device  complies  with  part  15  of  the  FCC  rules.  Operation  is subject  to the following two  conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
The  manufacturer  is not responsible for any radio or  TV interference caused  by  unauthorized  modifications  or  changes  to  this  equipment. Such  modifications  or  changes  could  void the user’s authority to operate the equipment.

•  This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection against harmful interference in a residential installation. This equipment generates uses and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by  turning  the  equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is  connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC  Caution:
Any  changes  or  modifications  not  expressly  approved  by  the  party responsible  for  compliance could void the user’s authority to operate this equipment.

• Product Name: Led mirror with bluetooth speakers
• Model Name: TD-BM-2430-BT-01

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>