Treevol Furniture WHFP031 Kitchen Island Shoproni Installation Guide
- September 13, 2024
- Treevol Furniture
Table of Contents
WHFP031 Kitchen Island Shoproni
“`html
Specifications:
- Brand: Not specified
- Product: Freestanding Kitchen Island
- Assembly: Required
- Tools needed: Phillips head screwdriver, Flat head screwdriver,
Hammer
Product Usage Instructions:
What You Will Need:
Hi! My name is Armando, and I’ll be with you while you assemble
this cabinet.
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard of the box or a rug)
- An electric screwdriver (optional)
Where to Start:
This step is crucial! Make sure to check the panel and hardware
content to ensure everything is in good shape.
Hardware Bag Contents:
- Wood dowel x49
- Spreading bolt x57
- Minifix cam x57
- Cover caps x63
- Hinge + screws x2
- Nail-on glide x8
- Handle + screws x1
- Shelf support x4
- Drywall screw x6 (1 1/8 inches)
How Dowels and Minifix System Work:
Wood Dowels:
- Insert the dowel into the indicated hole between panels.
- Gently hit the dowel until it’s fully inside to adjust the
joint.
Minifix System:
-
Insert the Minifix cam with the arrow pointing towards the
drilling on the panel’s edge. -
Add the spreading bolt with the black plastic part facing
down. -
Turn and secure the joint for a sturdy connection.
Assembling Steps:
Refer to the manual for a visual guide on assembling the panels
in order.
Setting Up the Door:
-
Slide the shelf inside the cabinet.
-
Adjust hinges for depth, lateral, height, and front
screws. -
Cover Minifix cams with cover caps once adjustments are
complete.
FAQ:
How much weight can the cabinet resist?
The weight capacity of the cabinet is not specified in the
manual. It is recommended to evenly distribute weight to prevent
overloading.
How to take care of the cabinet?
Follow the manufacturer’s recommendations for cleaning and
maintenance. Avoid using harsh chemicals that may damage the
finish.
“`
ASSEMBLY INSTRUCTIONS
FREESTANDING KITCHEN ISLAND
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5
Let’s start assembling!
6
How much weight does your cabinet resist?
26
Our last recommendations for taking care of your cabinet
27
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1
B – x1
C – x1
D – x1
E – x1
F – x1
G – x1
H – x1
I – x1
J – x1
K – x1
L – x1
M – x1
N – x1
O – x1
P – x1
Q – x1 U – x1
R – x1
S – x1
T – x1
3
What’s in the hardware bag?
Wood dowel
x49
Spreading bolt
x57
Minifix cam
x57
Cover caps
x63
Hinge + screws
x2
Nail-on glide
x8
Handle + screws
x1
Shelf support
x4
1 1/8″
Drywall screw
x6
Be careful!, try not to lose anything from this bag, its content is necessary
for assembling your cabinet.
4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
S
2
H
6
3
I
4
I S
H 7
5
Flat head screw
D
6
Q
8
7
Q I
S
H
D
8
L
Turn this panel over
9
L
9
T 10
10 11
L T
K
Turn this panel over
11
K
12
L T
K 12
13
K
L
T
I Q
S D
H
14
R 13
15
G
16
G
R
L
K
T
H
D
Q
I
14
17
O
18
N 15
19
P
20
C 16
21
O P
C N
22
N
C
P
O
G
L
R
K
T
H Q
D I
17
23
F
24
E 18
25
H
T FQ I
G L
N
C
K
E
PO
26
B
19
27
A 20
28
N
R
PE
G
C A
K
T L
H Q
S
D I
B
21
29
N PE
G
L A
K
Drywall screw 1 1/8″
R
H
T
Q
S D
I
B
22
30
M 23
31
M
G
E
L
A
K
H T
Q
S D
I
B
24
32
Assembling and
setting up the door
M
G
PE L
T
A J
H
Q S
K
U
D
I
B
Slide the shelf inside the cabinet.
Hinge adjustment
Depth adjustment
Lateral adjustment
After adjusting all the Minifix cams, cover
them up with the cover caps.
Height adjustment
Front screws adjustment
A
After finishing the assembly, lift off al the
adhesive letters.
25
How much weight does my cabinet resist?
45
15
15
15
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
26
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
NP
M R G
C O
E L
A
T
J
F
H Q
S
U
K
DI B
27
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in
the lot number printed on the product box and the assembly instructions
leaflet. Warranty covers materials and workmanship imperfections which impair
the assembly or correct functioning of the cabinet. This warranty is not valid
if the defects or imperfections are caused by the incorrect following of the
assembly instructions, warnings and recommendations, misuse, intentional
damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized, when it´s been assembled 3 months after
the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will
not be responsible for defective and/or damaged parts. This warranty is ONLY
valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been
resold, rented, etc. Furniture will take no liability for incidental or
consequential damages caused to or by the product (This may not apply in your
state). To make this warranty valid you must write to our customer service
email describing the product defect, lot number and submitting your sales
reciept or proof of purchase, or contact us at our customer service line.
Replaced parts will be under the product´s original warranty coverage period.
Damaged parts will become property of the company. There are no other
warranties applicable to this product.
28
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>