Treevol Furniture WHFP063 Magness Coffee Table Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
WHFP063 Magness Coffee Table
Product Information
Specifications
- Wood dowel quantity: 20
- Spreading bolt quantity: 28
- Minifix cam quantity: 28
- Cover caps quantity: 35
- Shelf support quantity: 2
- Handle quantity: 1
- Drywall screw quantity: 4
- Flat head screw quantity: 17
- Steel legs quantity: 4
Product Usage Instructions
What You Will Need
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or a rug)
- Electric screwdriver (optional)
Assembly Steps
-
Ensure all panel and hardware quantities are correct and in
good condition. -
Follow the provided panel quantity list to identify the
parts. -
Do not lose any hardware from the bag as it is essential for
assembly. -
Use wood dowels by gently hitting them into indicated holes in
panels. -
Assemble panels using the Minifix system with spreading bolts
and Minifix cams. -
Refer to the manual for the correct placement of panels and
hardware. -
Add steel legs and handles as instructed.
-
Secure all joints with flat head screws.
-
Insert drawers, add shelf support, and slide drawers into
place. -
Cover Minifix cams with cover caps after adjusting them.
Care Instructions
It is recommended to fix the cabinet to the wall to prevent
tipping, especially around children. Remove adhesive letters after
assembly.
FAQ
How much weight can my cabinet hold?
The cabinet can resist up to 33 pounds. Please ensure not to
exceed this weight limit.
What happens if I lose some hardware?
If you lose any hardware, it may affect the stability and
assembly of your cabinet. It is essential to keep all parts
together.
Can I use an electric screwdriver for assembly?
An electric screwdriver is optional but can make the assembly
process easier and quicker. Ensure not to overtighten screws.
ASSEMBLY INSTRUCTIONS
COFFEE TABLE
It’s much better if you get some company for this!
LOT N°
Index
What will you need?
2
Where should you start?
3
What’s in the hardware bag?
4
How do the dowels and Minifix system work?
(We also explain what they are)
5
Let’s start assembling!
6
How much weight does your cabinet resist?
16
Our last recommendations for taking care of your cabinet
17
What will you need?
Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.
Phillips head screwdriver Flat head screwdriver Hammer
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier
🙂
2
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 E – x1 I – x1
B – x1 F – x1 J – x1
C – x1 G – x1 K – x1
D – x1 H – x1
3
What’s in the hardware bag?
Wood dowel
x20
Spreading bolt
x28
Minifix cam
x28
Cover caps
x5
8×5/8 ” 2″
Cover caps
x30
Shelf support
x2
Handle
x1
Drywall screw
x4
Flat head screw
x16
Flat head screw
x1
Steel legs
x4
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
4
How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
When joining two
1
Put in the dowel
2
inside the indicated
panels together, don’t forget to gently hit
hole and softly hit it
the panels to adjust
until it’s fully inside.
the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
1
small arrow
This is a Minifix cam.
3
It has a little arrow on its
upper surface.
This is a spreading bolt. You should put it with the black plastic part facing down.
2
You should insert these cams
with the little arrow pointing towards the drilling on the
4
panel’s edge (shown on the
left).
After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.
5
1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of
this cabinet.
Flat head screw
A
Rotate
A
6
2
D
3
F
7
4
F D
5
E
8
6
E
D F
7
E A
F D
9
8
C
9
C
A
E
F D
10
10
B
11
B C
A
E
F D
11
12
K
13
H
12
14
15
K H
J I
Rotate
I J
13
16
I
17
H K
J
Handle Screw
G
14
18
I
H
K J
G
19
B
C
B
A
I KH
G
D J
After inserting the drawer,
add the shelf support
D
to the D-piece.
G
J
Slide the drawers inside the cabinet.
After adjusting all the Minifix cams, cover
them up with the cover caps.
A
After finishing the assembly, lift off al the
adhesive letters.
15
How much weight does my cabinet resist?
33
22
11
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone. Be specially careful with the kids.
16
Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do
not expose it to the direct sun. Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the
cabinet (only when indicated here). Clean it with thinner, a soft soap
solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other
people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
B
C
E
F
A
D
H
I
KJ G
17
WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces
since its manufacturing date, which you can see in the lot number printed on
the product box and the assembly instructions leaflet. Warranty covers
materials and workmanship imperfections which impair the assembly or correct
functioning of the cabinet. This warranty is not valid if the defects or
imperfections are caused by the incorrect following of the assembly
instructions, warnings and recommendations, misuse, intentional damage, fire
or flood, or after modifications or any kind of alteration, or repaired by
someone not authorized, when it´s been assembled 3 months after the date of
purchase. These defects MUST be reported before the warranty coverage period
ends. Once the product has been assembled, the company will not be responsible
for defective and/or damaged parts. This warranty is ONLY valid for the
ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented,
etc. Furniture will take no liability for incidental or consequential damages
caused to or by the product (This may not apply in your state). To make this
warranty valid you must write to our customer service email describing the
product defect, lot number and submitting your sales reciept or proof of
purchase, or contact us at our customer service line. Replaced parts will be
under the product´s original warranty coverage period. Damaged parts will
become property of the company. There are no other warranties applicable to
this product.
18
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>