Treevol Furniture WHFP087 Desk Eden Instruction Manual
- September 12, 2024
- Treevol Furniture
Table of Contents
- Treevol Furniture WHFP087 Desk Eden
- Product Usage Instructions
- What will you need?
- Where should you start?
- Panel quantity
- What’s in the hardware bag?
- How do the dowels and Minifix system work?
- Let’s start assembling!
- How much weight does my cabinet resist?
- Taking care of your cabinet:
- Cabinet panels
- WARRANTY POLICY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Treevol Furniture WHFP087 Desk Eden
Specifications
- Product: 80 C Desk
- Tools Required: Phillips head screwdriver, Flat head screwdriver, Hammer
- Additional Tools (optional): Electric screwdriver
- Surface Needed: Flat, smooth surface (cardboard or rug)
Product Usage Instructions
What You Will Need
Hi! My name is Armando, and I’ll guide you through assembling this cabinet.
Make sure you have the following:
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- A flat, smooth surface (cardboard or rug)
- (Optional) Electric screwdriver for easier assembly
Assembly Steps
- Panel Quantity Check: Ensure you have the correct quantity of each panel as listed in the manual.
- Hardware Contents: Verify the contents of the hardware bag to avoid losing any essential parts.
- Dowels and Minifix System: Follow the instructions for using wood dowels and the Minifix system during assembly.
- Drawer Slides Installation: Install drawer slides correctly, ensuring the wheels face the front and rear of the panels as indicated.
- Final Steps: Adjust all Minifix cams, cover them with caps, slide the drawer in, and remove adhesive letters.
Frequently Asked Questions (FAQ)
How much weight can my cabinet hold?
Your cabinet can resist a weight of 22 pounds. Please do not exceed this
limit to maintain its integrity.
What are the last recommendations for cabinet care?
After completing the assembly, make sure to follow these recommendations to
take care of your cabinet:
- Handle the cabinet with care to avoid damage.
- Clean the cabinet regularly with a damp cloth.
- Avoid placing excessive weight on the cabinet to prevent strain.
- Check and tighten any loose screws periodically.
ASSEMBLY INSTRUCTIONS
80 C DESK
It’s much better if you get some company for this!
What will you need?
A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this cabinet.
Please make sure that the quantity of each one is correct, and that everything
is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity
A – x1 | B – x1 | C – x1 | D – x1 |
---|---|---|---|
E – x1 | F – x1 | G – x1 | H – x1 |
I – x1 | J – x1 |
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.
How do the dowels and Minifix system work?
This is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.
Wood dowels
They are little wooden cylinders.
- Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
- When joining two panels together, don’t forget to gently hit the panels to adjust the joint.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
-
This is a Minifix cam.
It has a little arrow on its upper surface. -
You should insert these cams with the little arrow pointing towards the drilling on the panel’s edge (shown on the left).
-
This is a spreading bolt.
You should put it with the black plastic part facing down. -
After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
Drawer slides installation (apply for steps 1 and 2)
The wheel should go towards the front edge of the panel and facing down, like
this:
After adjusting all the Minifix cams, cover them up with the cover caps. After finishing the assembly, lift off al the adhesive letters.
How much weight does my cabinet resist?
Congratulations!It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping
and harming anyone.
Be specially careful with the kids.
Taking care of your cabinet:
- Do not paint the cabinet.
- The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
- Clean the metallic hardware with a dry cloth.
- DO NOT overload the cabinet (see suggested loads)
- Do not hit or hammer the cabinet (only when indicated here).
- Clean it with thinner, a soft soap solution or simply a damp cloth.
- Don’t drag the cabinet, lift it up with other people.
- Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
WARRANTY POLICY
Furniture has a 1 year warranty coverage in wooden parts and hardware pieces
since its manufacturing date, which you can see in the lot number printed on
the product box and the assembly instructions leaflet.
Warranty covers materials and workmanship imperfections which impair the
assembly or correct functioning of the cabinet.
This warranty is not valid if the defects or imperfections are caused by the
incorrect following of the assembly instructions, warnings and
recommendations, misuse, intentional damage, fire or flood, or after
modifications or any kind of alteration, or repaired by someone not
authorized, when it´s been assembled 3 months after the date of purchase.
These defects MUST be reported before the warranty coverage period ends. Once
the product has been assembled, the company will not be responsible for
defective and/or damaged parts.
This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if
the product has been resold, rented, etc.
Furniture will take no liability for incidental or consequential damages
caused to or by the product (This may not apply in your state).
To make this warranty valid you must write to our customer service email
describing the product defect, lot number and submitting your sales reciept or
proof of purchase, or contact us at our customer service line. Replaced parts
will be under the product´s original warranty coverage period. Damaged parts
will become property of the company.
There are no other warranties applicable to this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>