Treevol Furniture WHFP049 Bookcase XS Benzoni Installation Guide
- September 12, 2024
- Treevol Furniture
Table of Contents
WHFP049 Bookcase XS Benzoni
Specifications:
- Model: Home Bookshelf E2
- Manufacturer: La Nueva Estancia
- Country of Origin: Colombia
- Weight: Peso en Kg / Weight in Kg, Peso en Libras / Weight in
Lb
Product Usage Instructions:
Assembly Instructions:
-
Check that all pieces and hardware are present and in good
condition before starting assembly. -
Assemble the furniture with the help of another person.
-
Use an electric screwdriver for easier assembly.
Required Tools:
- Star screwdriver
- Flathead screwdriver
- Hammer
Assembly Steps:
-
Follow the instructions provided for using wood dowels, minifix
cams, spreading bolts, and other hardware. -
Secure joints by turning screws after joining panels
together. -
Anchor the furniture to the wall as instructed in step 13 for
proper functioning. -
After adjusting cams and screws, cover them with the provided
cover caps. -
Remove adhesive letters once assembly is complete.
FAQ:
Q: Do I need to anchor the furniture to the
wall?
A: Yes, it is recommended to anchor the
furniture to the wall for proper operation. Follow step 13 for
detailed instructions.
Q: Can I assemble the furniture alone?
A: It is recommended to assemble the furniture
with the help of another person to ensure safety and ease of
assembly.
Q: What tools are required for assembly?
A: You will need a star screwdriver, flathead
screwdriver, and a hammer for assembly.
INSTRUCCIONES DE ARMADO / ASSEMBLY INSTRUCTIONS
ESTANTE HOME E2 / HOME BOOKSHELF E2
Tel: (602) 695 9581 / 695 91 81 | EXT 118 La Nueva Estancia, Yumbo – Valle del
Cauca – Colombia
www.rta.com.co
¡ATENCIÓN! / ATTENTION!
En las próximas páginas está el contenido de las piezas y herrajes del mueble.
Asegúrate de que la cantidad de herrajes y piezas que hay en la caja sea la
correcta y todo esté en buen estado. Ya que cuando el mueble
esté armado no podrás realizar ninguna reposición.
On the next pages is the content of the pieces and hardware of the furniture.
Make sure the number of hardware and parts in the box is correct and
everything is in good condition. When the furniture is assembled you will not
be able to make any replacement
Recomendaciones Importantes / Key Recommendations
· Ensamble el mueble entre dos personas. / Assemble the cabinet
between two people.
· Ensamble el mueble sobre una superficie plana y lisa, preferiblemente
sobre un tapete o el cartón de la caja. / Assemble the cabinet on a flat
smooth surface, preferably on a careted floor or the box carton.
· Se recomendia utilizar un destornillador eléctrico para facilita el
ensamble / It is recommended to use an electric screwdriver to facilitate
assembly.
Herramientas Necesarias / Required Tools
Destornillador de estrella
Destornillador de pala
Martillo
Herrajes Básicos / Basic Hardware
Aplica estas instrucciones cada vez que vayas a utilizar uno de estos herrajes
durante el armado. / Apply these instructions everytime you’re using one of
these connectors during the assembly.
Tarugos / Wood Dowels
1. Inserta el tarugo en la perforación indicada y golpéalo suavemente hasta
que llegue hasta el final de la perforación. / Put in the dowel inside the
indicated hole and softly hit it until it’s fully inside
2. Verifica que NO se inserte el tarugo en la perforación de la caja minifix.
/ Verify that the dowel is NOT inserted into the perforation of the minifix
cam.
Minifix y Pernos / Minifix Cam & Spreading Bolt
pequeña flecha small arrow
1
1. La caja minifix tiene una pequeña flecha en su parte superior, se debe
insertar las cajas minifix con la flecha apuntando hacia la perforación que
hay en el borde de la pieza. / The Minifix cam has a little arrow on its upper
surface you should insert these cams with the little arrow pointing towards
the drilling on the panel’s
edge
2. Se debe insertar el perno con la
2
parte plástica hacia abajo. / The spreading bolt should be put with the
black plastic part facing down.edge.
3. Luego de unir las piezas, se deben
3
girar 180° las cajas minifix con un destornillador de estrella para ajustar y
asegurar el ensamble. / After joining
two panels together you should turn
the cams 180° with a phillips head
screwdriver to adjust and secure the
joint.
Herrajes / Hardware
Cargas Máximas / Max Suggested Loads
Tarugo / Wood dowel
x10
Perno Minifix / Caja Minifix / Spreading Bolt Minifix Cam
x6
x6
Tapa Minifix / Cover Caps
x16
Puntilla / Nail
x3
Deslizador Puntilla / Nail-on Glide
x4
Tachuela / tack
x20
Chazo + Tornillo/ Wall anchor + screw
x2
Tornillo ensamble / Drywall screw
x8
Soporte entrepaño / Shelf support
x12
Grapa para fondo /
Rear Panel
x3
Peso en Kg / Weight in Kg. Peso en Libras / Weight in Lb
Piezas de Armado /Assembly Parts
A – x1
B – x1
C – x1
D – x1
E – x3
F – x1
G – x1
H – x1
D
I – x1
I – x2
B
H I
I E E
C F
E
A G
1
Advertencia: Este mueble debe ir anclado a pared
!
para su correcto funcionamiento (revisar paso 13 Warning: This furniture must be anchored to the wall for proper operation (check step 13)
3
C
2
4
B
H
H B
5
F
6
A
7
G
8
G A
9
10
B H
C
D
F
G
A
11
B
C F
D
12
Ubicar las tachuelas del centro a esta distancia Locate the tacks of the center at this distance.
I I
G A
Procure que la perforación de la grapa para el fondo no quede entre la unión
de las piezas I, para que estas no queden separadas. Make sure that the
perforation of the rear panel does not remain between the union of the pieces
I, so that
they do not separate.
I I
C
Tachuela Tack
A
Voltea el mueble Turn over the cabinet
¡Con mucho cuidado! very carefully!
Puntilla Nail
Voltea el mueble Turn over the cabinet
¡Con mucho cuidado! very carefully!
13
Fija el mueble a la pared Fix your cabinet to the wall
1 En la pared, mide y marca los puntos que te indicamos abajo. On the wall, measure and mark the points shown below.
2 Debes perforar en los puntos con taladro y una broca de 5/16″ Drill on the markings with a 5/16″ drill bit.
3 Inserta los chazos plásticos en las perforaciones. Insert the wall anchors inside the drillings.
4 Ubica el mueble y asegúralo con los tornillos. Place the cabinet and secure it with the screws.
H
14
Desliza el entrepaño dentro del mueble.
Slide the shelf inside the cabinet.
B
E E
F
C
D
E
A
Advertencia: Este mueble debe ir anclado a pared
!
para su correcto funcionamiento. Warning: This furniture must be anchored to the wall for proper operation.
Después de ajustar todas las cajas minifix y los tornillos, cúbralas con las
tapas adhesivas.
After you finish the adjustment of the cams and screws, cover them with the
cover caps.
A
Al terminar de armar, desprenda las letras adhesivas.
After you finish assembling the cabinet, take off the adhesive letters.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>