Treevol Furniture WHFP022 Storage Cabinet Mole keede Installation Guide

WHFP022 Storage Cabinet Mole keede

“`html

Specifications:

• Panel quantity:
  • A – x1
  • B – x1
  • C – x2
  • D – x1
  • E – x1
  • F – x1
  • G – x3
  • H – x1
  • I – x1
  • J – x1
• Hardware bag contents:
  • Wood dowel x20
  • Spreading bolt x14
  • Minifix cam x14
  • Cover caps x14
  • Hinge + Screws x3
  • Flat head screw x28
  • Drywall screw x2
  • Wall anchor + screw x4
  • Broom holder x1
  • Handle + Leg Screws Nail x4 x1 x50

Product Usage Instructions:

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble
this cabinet.

• Phillips head screwdriver

• Flat head screwdriver

• Hammer

• A flat, smooth surface. You can use the cardboard of the box or
  a rug.

• An electric screwdriver isn’t necessary, but it can make the
  work much easier 🙂

Where should you start?

This is so IMPORTANT! Over the next few pages is the panel and
hardware content for this cabinet. Please make sure that the
quantity of each one is correct, and that everything is in good
shape. (When the cabinet is already assembled there’s no warranty
for this)

What’s in the hardware bag?

Be careful!, try not to lose anything from this bag, its content
is necessary for assembling your cabinet.

How do the dowels and Minifix system work?

This is so important too!

Wood dowels

1. Put in the dowel inside the indicated hole and softly hit it
   until it’s fully inside.

Minifix system

1. You should insert the cams with the little arrow pointing
   towards the drilling on the panel’s edge.

2. After joining two panels together you should secure the
   joint.

Let’s start assembling!

You can see the last page of this manual to have a full look of
the panels of this cabinet.

Fix your cabinet to the wall

1. On the wall, measure and mark the points shown below.
2. Drill on the markings with a 5/16 drill bit.
3. Insert the wall anchors inside the drillings.
4. Place the cabinet and secure it with the screws.

How much weight does my cabinet resist?

*weight in pounds:

Congratulations! It’s done

FAQ:

Q: How can I ensure that I have assembled the cabinet

correctly?

A: Make sure to follow the assembly instructions step by step
and check that all components are securely connected.

Q: Can I use additional tools other than those mentioned in the

manual?

A: While it’s recommended to use the specified tools, you can
use alternatives as long as they are suitable for the task.

Q: What should I do if I encounter missing parts during

assembly?

A: Contact customer support immediately to request replacement
parts and avoid proceeding with incomplete assembly.

“`

ASSEMBLY INSTRUCTIONS
CLEANING CABINET
It’s much better if you get some company for this!

LOT N°

Index

What will you need?

2

Where should you start?

3

What’s in the hardware bag?

4

How do the dowels and Minifix system work?
(We also explain what they are)

5

Let’s start assembling!

6

How much weight does your cabinet resist?

13

Our last recommendations for taking care of your cabinet

14

What will you need?

Hi! my name is Armando, and I’ll be with you while you assemble this cabinet.

Phillips head screwdriver Flat head screwdriver Hammer

A flat, smooth surface. You can use the cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it can make the work much easier 🙂
2

Where should you start?
This is so IMPORTANT!
Over the next few pages is the panel and hardware content for this
cabinet. Please make sure that the quantity
of each one is correct, and that everything is in good shape.
(When the cabinet is already assembled there’s no warranty for this)
Panel quantity

A – x1 E – x1 I – x1

B – x1 F – x1 J – x1

C – x2 G – x3

D – x1 H – x1

3

What’s in the hardware bag?

Wood dowel
x20

Spreading bolt
x14

Minifix cam
x14

Cover caps
x14

1/2 ” 2 1/2″

Hinge + Screws
x3

Flat head screw
x28

Drywall screw
x2

Wall anchor + screw x4

Broom holder
x1

Handle +

Leg

Screws

Nail

x4

x1

x50

Be careful!, try not to lose anything from this bag, its content is necessary for assembling your cabinet.

4

How do the dowels and Minifix system work?
this is so important too!
Everytime you’re using one of these connectors during the assembly, you
should follow these same steps.

Wood dowels
They are little wooden cylinders.

When joining two

1

Put in the dowel

2

inside the indicated

panels together, don’t forget to gently hit

hole and softly hit it

the panels to adjust

until it’s fully inside.

the joint.

Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.

1

small arrow
This is a Minifix cam.

3

It has a little arrow on its

upper surface.

This is a spreading bolt. You should put it with the black plastic part facing down.

2

You should insert these cams

with the little arrow pointing towards the drilling on the

4

panel’s edge (shown on the

left).

After joining two panels together you should turn the
cams 180° with a phillips head screwdriver to adjust
and secure the joint.

5

1 Let’s start assembling!
You can see the last page of this manual to have a full look of the panels of this cabinet.
A
VOLTEAR
A
2
B
6

3
C

4
D

E
7

1/2″

5
F
6

Gx3
H
8

7
E G G G F B

8

E G

B

G

G

C

F

9

9
D

E G

B

G

C G

A

F

10

I B
A

3mm

3mm
10

11
D

G

I

H

G

G B
C F
A

Hinge adjustment

Depth adjustment

Lateral adjustment

Height adjustment

Front screws adjustment

11

12

Fix your cabinet to the wall

1 On the wall, measure and mark the points shown below.

2 Drill on the markings with a 5/16″ drill bit.

3 Insert the wall anchors inside the drillings.

4 Place the cabinet and secure it with the screws.

Wall
103 192 103
E

1740 mm

160 mm

103 192 103
F
Finished floor

After adjusting all the Minifix cams, cover
them up with the cover caps.

A

After finishing the assembly, lift off al the
adhesive letters.

12

How much weight does my cabinet resist?
8
8
8
10
*weight in pounds
Congratulations! It’s done
But don’t go yet!
There are some recommendations left for you to take care of your cabinet
correctly from now on.
SUPER IMPORTANT!
We suggest fixing the cabinet to the wall, so we can avoid the cabinet tipping and harming anyone. Be specially careful with the kids.
13

Taking care of your cabinet:
Do not paint the cabinet. The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun. Clean the metallic hardware with a dry cloth. DO NOT overload the cabinet (see suggested loads) Do not hit or hammer the cabinet (only when indicated here). Clean it with thinner, a soft soap solution or simply a damp cloth. Don’t drag the cabinet, lift it up with other people. Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
D E

G

B

H

G

C

I

G

F A
14

WARRANTY POLICY
PÓLIZA DE GARANTÍA
Furniture has a 31 year warranty coverage in wooden parts and 1 year warranty coverage in hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet. Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet. This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase. These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts. This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc. Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state). To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company. There are no other warranties applicable to this product.
15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>