Fiilex FLXG6CLR Cinematic LED Ellipsoidal Light User Manual

FLXG6CLR Cinematic LED Ellipsoidal Light

“`html

Specifications

• Model: FLXG6CLR
• Power: 175W
• Type: Cinematic LED Ellipsoidal Light

Product Usage Instructions

Unpacking and Setup

1. Open the package carefully and remove all contents.

2. Check if all parts mentioned in the package contents list are
included.

3. Place the light fixture on a stable surface for setup.

Installation

Mounting: Follow the mounting instructions
provided in the user manual to securely mount the light
fixture.

Connection to AC Power: Connect the light
fixture to a suitable AC power source following the provided
guidelines.

Operation

1. Power on the light fixture using the designated power
switch.

2. Use the control panel to adjust settings such as brightness
and color temperature.

DMX Connection

1. Connect the light fixture to a DMX controller using the
provided instructions.

2. Ensure proper addressing and termination for reliable DMX
communication.

FAQ

Q: Is this light fixture suitable for household use?

A: No, this unit is designed for professional applications and
not for household use.

Q: What is the warranty coverage for this product?

A: The product is covered by a one-year parts and labor limited
warranty unless otherwise stated.

Q: How should I clean and maintain the light fixture?

A: Refer to the maintenance section in the user manual for
detailed instructions on cleaning and maintenance to ensure product
longevity.

“`

USER MANUAL

Model No: FLXG6CLR 175W Cinematic LED Ellipsoidal Light

English Version Rev.01 – 07/0/2024

Thank you for choosing Fiilex
Please note that every Fiilex product has been designed in the USA to meet quality and performance requirements for professionals and manufactured for the use and application as shown in this document. Any other use, if not expressly indicated, could compromise the condition and operation of the product and/or be a source of danger. This product is meant for professional use. Therefore, commercial use of this equipment is subject to applicable national accident prevention rules and regulations. Features, specifications, and appearance are subject to change without notice. Fiilex and all affiliated companies are not liable for for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this document. Product datasheets can be downloaded from the website www.fiilex.com or can be received from the official Fiilex customer service team (Fiilex@fiilex.com). The QR Code provided will access the product page for the most up-to-date technical documentation including specifications, datasheets, technical drawings, photometrics, DMX personalities, and fixture firmware updates.
G6 Webpage
The Fiilex Logo, Fiilex names, and all other trademarks in this document pertaining to Fiilex services or Fiilex products are trademarks of DiCon FiberOptics, Inc., its affiliates, and subsidiaries. Fiilex is a registered trademark. All rights reserved. FiberOptics 1689 Regatta Blvd. Richmond, CA 94804 USA.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
01

PACKAGE CONTENTS

INTRODUCTION

01

INDEX

02

SAFETY INFORMATION

04

WARRANTY

07

1 – PACKAGING

08

PACKAGE CONTENTS

08

OPTIONAL ACCESSORIES

08

2 – SPECIFICATIONS

08

3 – TECHNICAL DRAWING INFORMATION

09

4 – PHOTOMETRIC DATA

09

5 – BEAM PROFILE

10

6 – INSTALLATION

11

MOUNTING

11

7 – CONNECTION TO AC POWER

12

8 – START UP

12

CONNECT AND DISCONNECT POWER

12

9 – PRODUCT OVERVIEW

13

PARTS DIAGRAM

13

10 – CONTROL PANEL

14

DISPLAY AND BUTTON LAYOUT

14

KNOB FUNCTION

15

KNOB BEHAVIOR FOR ALL MODES

15

11 – DMX CONNECTION

16

CONNECTION OF THE DMX SIGNAL

16

INSTRUCTIONS FOR A RELIABLE DMX CONNECTION

16

DAISY CHAINING

16

DMX TERMINATION

16

DMX ADDRESSING

16

12 – MENU STRUCTURE

17

MENU

17

13 – DMX MAPPING

20

NOTES

20

DMX MODES

21

14 – RDM FUNCTIONS

45

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
02

15 – ACCESSORIES ADJUSTMENTS

55

ADDITIONAL ACCESSORIES

55

16 – MAINTENANCE

56

MAINTENANCE AND CLEANING

56

VISUAL CHECK OF PRODUCT HOUSING

57

17 – TROUBLESHOOTING

58

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
03

SAFETY INFORMATION
IMPORTANT Read carefully before use and keep for future reference.
This unit is only for professional applications. It is not for household use.
Connection to AC power supply:
· The connection to the AC power supply must be carried out by a qualified electrical installer. · Use only 100-240V AC, 50-60 Hz input. Ensure the fixture is properly grounded. · Ensure the electrical system is appropriately sized to the maximum current draw of the product and the possible number
of products connected at the same circuit. · Do not connect the product to a dimmer system; doing so may damage the product.
Protection and Warning against electrical shock
· Do not remove the housing of the product. Always disconnect the product from AC power before servicing. · Ensure that the fixture is properly grounded. · Ensure the source of AC power complies with local building and electrical codes and has both overload and ground-fault
protection. · Before using the fixture, check that all power distribution equipment and cables are in perfect condition and rated for the
current requirements of all connected devices. · Remove the fixture from power immediately if the power plug or any seal, cover, cable, or other components are
damaged, defective, deformed, or showing signs of overheating. · Do not reapply power until repairs have been completed. · Refer any service operation not described in this manual to the Fiilex Customer Service team.
Installation
· Make sure that all visible parts of the product are in good condition before its use or installation. · Make sure the point of anchorage is stable before positioning the fixture. · When suspending the fixture above ground level, secure it against failure of primary attachments by attaching a safety
cable that is approved as a safety attachment for the weight of the fixture. · Install the product only in well-ventilated places. · For nontemporary installations ensure that the fixture is securely fastened to a load-bearing surface with suitable
corrosion-resistant hardware. · For a temporary installation with clamps, ensure that all fasteners and/or screws are secured fully, and the fixture is
secured with a suitable safety cable.
Protection from burns and fire
· The exterior of the fixture becomes hot during use. Avoid contact with persons and materials. · Ensure that there is free and unobstructed airflow around the fixture. · Keep flammable materials well away from the fixture. · Do not expose the front lens to sunlight or any other strong light source from any angle. · Lenses can focus the sun’s rays inside the fixture, creating a potential fire hazard. · Do not attempt to bypass thermostatic switches or fuses.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
04

SAFETY INFORMATION
Maintenance
· Warning! Disconnect the fixture from AC power and allow it to cool for at least 10 minutes before handling. · Only technicians who are authorized by Fiilex or Authorized service partners are permitted to open the fixture. · Users may carry out external cleaning, following the warnings and instructions provided, but any service operation not
described in this manual must be referred to a qualified service technician. · Important! Excessive dust, smoke fluid, and particle build-up all degrade performance, cause overheating, and will damage
the fixture. Damages caused by inadequate cleaning or maintenance is not covered by the product warranty.
Transportation
· LED lights should be shipped in sturdy packaging to prevent damage during transit. · Avoid extreme hot or cold temperatures when transporting. · Handle products carefully to prevent dropping or impacts.
Storage
· Store in a dry, room-temperature environment away from moisture/humidity. · Avoid storing in very hot or freezing areas for extended periods. · Packaging should protect against dust/debris when not in use.
Power Supply/Driver Space
· Allow several inches of clearance around any external power supply units or LED drivers for ventilation and heat dissipation.
Light Head Clearances
· Provide at least 6-12 inches of clearance from any walls or surfaces to avoid heating issues. · Ideal spacing between multiple LED light heads depends on their beam angles, but 2-4 feet is typical to prevent overlapping
hot spots.
Set/Subject Spacing
· The minimum distance from the LED front to a subject depends on the beam angle and intensity of the particular model. · For broad sources, 3-6 feet is common, while narrow beam LED lights may need 6-10 feet of working distance.
Cable Management
· Leave enough space to neatly arrange power and data cables without pinching or excessive bending.
Do not stare at the operating light source
· Do not look directly at the LED source during operation. It can be harmful to the eyes and skin. · During Installation, operation, and maintenance, be prepared for the fixture to illuminate when connected to power.
Photobiological safety
· This device emits potentially dangerous optical radiation and is identified in the category of Risk Group 1 according to EN 62471.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
05

SAFETY INFORMATION
Disposal
· This product is supplied in compliance with European Directive 2012/19/EU ­ Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose/ recycle this product at the end of its life according to the local regulation.
The products to which this manual refers comply with
· 2014/35/EU – Safety of electrical equipment supplied at low voltage (LVD). · 2014/30/EU – Electromagnetic Compatibility (EMC). · 2011/65/EU – Restriction of the use of certain hazardous substances (RoHS).
The products referred to in this manual comply with
· UL 1573 + CSA C22.2 No. 166 – Stage and studio luminaires and connection strips.
FCC Compliance
· This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
06

WARRANTY
Unless otherwise stated, your product is covered by a one-year parts and labor limited warranty.
Fiilex guarantees, to the original buyer, that this product is to be free of defects in both workmanship and material for a period of one year from the date of shipment. This warranty extends to all products which have proved defective through normal use but excludes products that have been disassembled, modified, or misused by the buyer or any other person. This warranty is in lieu of all other warranties, and disclaims all warranties expressed or implied, including any warranty of merchantability, fitness for a particular purpose, or arising from the course of dealing between the parties or usage of trade.
Returning an item under warranty for repair It is necessary to obtain a Return Authorization Number (RA#) from your dealer/point of purchase BEFORE any units are returned for repair. Fiilex will make the final determination as to whether or not the unit is covered by warranty. Fiilex will replace or repair to proper working condition any products that are returned under warranty. Products repaired or replaced under warranty are under warranty only for the remaining unexpired period of time of the original warranty.
Any Product unit or part returned to Fiilex must be packaged in a suitable manner to ensure the protection of such Product unit or parts. The package must be clearly and prominently marked to indicate that the package contains returned Product units or parts with a Return Authorization (RA#) number. All returned product units or parts must be accompanied by a written explanation of the alleged problem or malfunction.

· DO NOT obstruct the fixture’s air vents. · DO NOT install G6 COLOR in damp or wet locations. · DO NOT disassemble G6 COLOR. This will void the warranty. · DO NOT look into the light source. Be cautious of the high-intensity beam. · The luminaire should be operated by trained users only.
· Use a safety cable (not included) when rigging G6 COLOR overhead. · Shields and lenses shall be changed if they have become visibly damaged. · If damaged, the luminaire must be repaired or replaced before further use. · Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture and
will void the fixture’s warranty.

SERVICE ADDRESS

LIGHTPOWER (EU)

FIILEX (US)

An der Talle 24-28

1689 Regatta Blvd.

D-33102 Paderborn

Richmond, CA 94804

Germany

USA

+49 5251 1432-0 sales@lightpower.de

(510) 620 5155 fiilex@fiilex.com

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
07

1 – PACKAGING
Package contents
· 1x G6 COLOR w/ LumenRadio Head & Yoke · 1x FLXG6CLR-PSU-185V · 1x FLXG6CLR- PSU-ACJ6-TRUE1
Optional accessories
The most updated accessories list, descriptions, and information about the product can be found at the following link: https://fiilex.com/products/G6_Color.php

2 – SPECIFICATION

Beam Angle

19° / 36°/ 50° lens tube

CCT Range

2000-10000K continuous tuning + magenta/green shift

CRI / TLCI

95 / 90 typical

Control Modes

CCT, HSI, RGBW, GEL, CCTRGBW, CCTHSI, CIExy, ICTHS, and more

Dimming

100% – 0% flicker free

Dimming Modes / Curves Smooth, Sharp / Linear, Gamma

Light Engine

DiCon Dense Matrix LED

Power Consumption

175W max AC | 160W max DC

BTUs/hour

596 (BTUs/hour) max

DC Input

24 – 48V DC (via XLR-3 Port)

AC Input

100 – 240V AC, 50 ~ 60Hz

DMX/RDM Port

XLR-5 in and out

Wireless Control

Integrated LumenRadio CRMX

Weight

Fixture: 11 lbs / 5.0kg (With lens tube)

Power adapter: 3.3 lbs / 1.5kg

Size (L x W x H)

16.4″ x 11.1″ x 15.7″ / 41.7cm x 28.4cm x 39.9cm

Mount

Combo (baby stud female / junior stud male)

USB-A Power Out

5V/1A (via USB-A)

USB-C Interface

FW Update / Remote

IP Rating

IP-X5 (water-resistant)

Thermal Design

Controllable fan (OFF / SILENT / AUTO / FULL)

Operating Temperature

0 – 40ºC / 32 – 104ºF

GoBo Size

M Size (Diameter 66mm / Max Image: 48mm / Max Thickness: 1mm)

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
08

3 – TECHNICAL DRAWING INFORMATION

Dimming Modes / Curve

11.1″ (28.3 cm)
7.7″ (19.6 cm)

8.0″ (20.4 cm)
15.7″ (39.8 cm)

17.8″ (45.2 cm)
16.4″ (41.7 cm)

±110° Tilt

FLXG6CLR – Weight Fixture: 11 lbs / 5.0kg (With lens tube) Power adapter: 3.3 lbs / 1.5kg
4 – PHOTOMETRIC DATA

G6 @3200K

Distance

Spot 36°
(With 36° Lens) FC

Lux

Spot 19°
(With 19° Lens)

2.0 m [6.6 ft]

3.0 m [9.8 ft]

5.0 m [16.4 ft]

474 1138 12253 5100

192 455 4902 2065

33 36°
76 19°
819
354

G6 @5600K

Distance

Spot 36°
(With 36° Lens) FC

Lux

Spot 19°
(With 19° Lens)

2.0 m [6.6 ft]

3.0 m [9.8 ft]

5.0 m [16.4 ft]

485 1155 12436 5222

196 461 4964 2115

34 36°
78 19°
837
363

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
09

5 – BEAM PROFILE
Beam Profile of G6 COLOR

Illuminance (Lux)

5000

3200K-19º

4500

4000

3500

3000

2500

2000

1500

1000

500

0

-80

-60

3200K-36º

5600K-19º

-40

-20

0

20

40

Angle (Degrees)

5600K-36º

60

80

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
10

6 – INSTALLATION
Mounting
Check that the supporting structure can safely bear the weight of all installed fixtures, clamps, cables, auxiliary equipment, etc. and complies with locally applicable regulations. When suspending the fixture above ground level, secure it against failure of primary attachments by attaching a safety wire that is approved as a safety attachment for the weight of the fixture to an anchor point on the product main frame. Do not use removable parts or weak anchors for secondary attachment. Warning! When clamping the fixture to a truss or other structure at any angle, use clamps of half coupler type. Do not use any type of clamp that does not completely encircle the structure when fastened.
Attach Clamp
*Fiilex does not include a clamp with lighting products.
11.1″ (28.3 cm) 7.7″ (19.6 cm)
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
11

7 – CONNECTION TO AC POWER
Warning! To protect from electric shock, the fixture must be grounded. The product is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC power source from 100-240 Volts. If you need to install a power plug on the power cable to allow connection to power outlets, install a grounding-type plug, following the plug manufacturer’s instructions. If you have any doubts about proper installation, consult a qualified electrician. The max power consumption is 175W.

Core (EU) Brown Blue
Yellow+green

Core (US) Black White Green

Connection Live
Neutral Ground

Plug terminal marking L N

8 – START UP
Connect and disconnect power from the product
To apply and disconnect power to the product: · Check that the product is installed and secured as indicated in the Safety Information, and that
personal safety will not be put at risk when the fixture lights up. · Connect the power connector into the AC input socket (100-240V AC-50/60 Hz). · The product is then ready for its operations and can be controlled through the available input signals
on board. · To disconnect power from the product, disconnect the AC input from the socket.

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
12

9 – PRODUCT OVERVIEW

Parts diagram

7

13

1

8

14

20

15

2

9

21

16 10

22

3

17

23

11

18

24

4

12

19

25

5

6

1. Handles 2. Lens Tube Extended Release Pin 3. Tilt Lock Lever 4. Yoke 5. Baby/Junior Pin Receiver 6. Mount Tightening Knob 7. Vent Holes 8. Power Supply Unit (PSU) 9. Barrel Rotation Release Pin

10. Shutter 11. Barrel 12. LEKO 13. OLED Display 14. Yoke Bolt 15. Intensity Control Knob 16. CCT/HUE Knob 17. GN/SAT Knob 18. USB Type-A Port (5V/1A Power)

19. DMX Input (XLR-Male 5-pin) 20. Antenna 21. Navigation Pad 22. ON/OFF Switch 23. USB Type-C Port
(For updating firmware/RPU) 24. DMX Output
(XLR-Female 5-pin) 25. DC Input Port (24-48V)

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
13

10 – CONTROL PANEL
The product has a display and buttons to access the control panel functions.

1

5

2
6 7

8

3

9

4

10

Display and buttons layout
1. OLED Panel : Used to view all menu functions 2. Knobs : Adjustments (Parameter adjusted depends on DMX operating mode) 3. USB Type-A Port : 5V/1A USB power port 4. DMX IN/OUT : DMX input and output ports 5. Antenna : LumenRadio CRMX antenna 6. OK Button : Confirms current menu, value or option 7. Navigation Pad : Used to access and adjust parameters 8. ON/OFF Button : Powers the LED engine on and off 9. REMOTE FW Port : For firmware updates/Remote patcher utility controller 10. DC 24-48V : 24-48V DC power input
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
14

10 – CONTROL PANEL
Knob Function

Knob Actions

CCT/HUE
Turn CCT/HUE
Adjust

CCT/HUE Press
Quick Adjust

GN/SAT
Turn GN/SAT Adjust

GN/SAT Press
Quick Adjust

INT
Turn INT Adjust

Press

Press

Press

Up/Down Left/Right Confirm

Move

Move

Knob behavior for all modes

Input
Knob Actions Description

DMX Modes

CCT

HSI

RGBW

CCTHSI CCTRGBW

EZ CCT EZ HSI EZ RGBW EZ CCTHSI EZ CCTRGBW

CIExy

GEL RGB

CCTxy

ICTHS ICT RGBW

EZ CIExy

EZ RGB EZ CCTxy EZ ICTHS EZ ICTRGBW

ICT xy EZ 3200K EZ 5600K EZ ICTxy

Turn Adjust INT value INT
Adjust CCT value
Adjust HUE value Turn CCT/HUE CCT/HUE Quick Adjust

R/G/B/W CCT/GN/ CCT/GN/

x/y

XFADE/

XFADE/

HUE/SAT R/G/B/W

R/G/B

CCT/GN/ CCT/GN/ XFADE/ HUE/SAT
x/y

CCT/GN/ R/G/B/W

CCT/GN/ x/y

Quick Adjust Press CCT/HUE CCT/HUE HUE value
1 Press +60°

Turn GN/SAT GN/SAT

Adjust GN value Adjust SAT value

Press GN/SAT GN/SAT

GN value 1 Press +0.25
SAT value 1 Press +25%

3200K 5600K

All Modes

Buttons

Actions Function

INT

CCT

GN

HUE

SAT

R/G/B/W

XFADE

X,Y

DMX START ADDR

IP value

Press

Up/Down

±1

±50

±0.01

±1

±1

±1

±1

±0.001

±1

±1

Up/Down Button

Adjust Value Press Hold

(1s’)

±10

±500

±0.1

±10

±10

±10

±10

±0.05

±10

±10

Up/Down

Center Button

Press

+25%

3200K

+0.25

+60°

+25°

+25

Confirm

Switch Value

5600K

+25

+0.2

+100

*CCT~x,y quick switch function does not work in Gel mode.

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
15

11 – DMX CONNECTION
Connection of the DMX signal
The product has XLR-5 sockets for DMX input and output. The default pin-out on both sockets is shown below:

DMX – INPUT XLR-5 plug

Pin1 : GND – Shield Pin2 : – Signal Pin3 : + Signal Pin4 : N/C Pin5 : N/C

DMX – OUTPUT XLR-5 socket

Instructions for a reliable DMX connection
Use shielded twisted-pair cable designed for RS-485 devices: standard microphone cable cannot transmit control data reliably over long runs. 24 AWG cable is suitable for runs up to 300 meters (1000 ft). Heavier gauge cable and/or an amplifier is recommended for longer runs. To split the data link into branches, use splitter-amplifiers in the connection line. Up to 32 devices may be connected on a single DMX run.
Daisy chaining
Connect the DMX data output from the DMX source to the product DMX input (male connector XLR-5) socket. Run the data link from the product XLR-5 output (female connector XLR-5) socket to the DMX input of the next fixture. Terminate the data line by connecting a 120 Ohm signal terminator to the list fixture. If a splitter is used, terminate each branch of the link. DMX connection employs standard XLR-5 connectors. Use shielded pair-twisted cables with 120 Ohm impedance and low capacity. The following diagram shows the connection diagram:

DMX IN DMX OUT

DMX IN DMX OUT

DMX IN DMX OUT

DMX IN

DMX512 Controller

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
16

11 – DMX CONNECTION
DMX termination
The termination is prepared by soldering a 120 Ohm 1/4 W resistor between pins 2 and 3 of the male XLR-5 connector, as shown in figure.
120 Ohm
X control circuit is not isolated. · Cumulative leakage current on the DMX control circuit is less than 3.5 mA.
DMX addressing
In order to start controlling the product via DMX, the first step is to select a DMX address, also known as the start channel. This is the first channel used to receive instructions from a DMX controller. If you wish to control the product individually, it is necessary to assign a different starting address channel to each fixture. The number of channels occupied from the product depends on the DMX mode selected, so always verify the DMX Mode in the MENU before start addressing. If you assign two fixtures the same address, they will be execute the same behaviour. Selecting the same address to multiple fixtures can be useful for diagnostic purposes and symmetrical control. DMX addressing is limited to make it impossible to set the DMX address so high that you are left without enough control channels for the product. When addressing DMX fixtures, ensure that the addresses are set such that the fixture footprints do not overlap. Overlapping DMX footprints will cause fixtures to exhibit unintended behavior.
To set the fixture’s DMX address: 1. Press center button to enter main menu. 2. Navigate to right, reach the “DMX ADDR” menu, then select the DMX ADDRESS settings. 3. Select the address from 1 to 512 using the navigation UP/DOWN and confirm by pressing center
button. 4. Double click the center button to return to the main page.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
17

12 – MENU STRUCTURE
Menu

• Double click center button to return to the upper level. Enter the current mode function of the Dashboard by pressing the center button. Please refer to the Dashboard section for detail flow of each function.
  Continued navigating right to see the entire menu.

Main Page

“MODE”

BACK allows to return to upper level
“DMX ADDR”

• Please refer to the following MODE Part for detail.
  “WIRELESS CRMX”

“NODE”

“FAN (NO DMX)”

“COLOR”

1. When DMX is connected, Fan mode will not be editable and show “Fan (DMX)”.
2. When DMX is not connected, Fan mode will be editable and show “Fan (No DMX)”.
3. When DMX is connected and DMX fan setting is 0~9, fan mode is still not editable and shows the internal fan setting.

• Show all mode CIE x,y color info
  “DIMMING”
  “CURVE”

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
18

12 – MENU STRUCTURE

Menu

• Double click center button to return to the upper level. Enter the current mode function of the Dashboard by pressing the center button. Please refer to the Dashboard section for detail flow of each function.

“WHITE POINT”

“SAVE”

• White point : 2000k ~ 10000k
  “SCREEN”

“FIXTURE”

“FACTORY”

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
19

13 – DMX MAPPING
The product can communicate using RDM (Remote Device Management) protocol over a DMX512 Network. RDM is a bi-directional communications protocol for use in DMX512 control systems. RDM is the open standard for DMX512 device configuration and status monitoring. RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to and receive messages from specific fixtures. The PIDs in the following tables are supported in the product.
Notes

• HSI, RGBW and RGB modes are based on user adjustable white point of 6500K. For instance, if a white point of 6500K is selected in HSI mode, when “Saturation”= 0%, the fixture outputs 6500K white.
  ** CCTHSI, CCTRGBW, ICTHS, and ICTRGBW modes, the white point is determined and can be adjusted by the “CCT” and “Green Adjust” parameters. This applies at any “Crossfade” value in CCTHSI and CCTRGBW modes. The following scenarios illustrate how white point is determined by the “CCT” parameter, given all other parameters being the same.
  Scenario 1: In CCTRGBW modes, the following 4 settings produce the 3200K white. Notice that the white remains the same regardless of the “Crossfade” parameter. 1) CCT=3200K, Xfade=0% 2) CCT=3200K, Xfade=100%, W=100% 3) CCT=3200K, Xfade=100%, RGB=100% 4) CCT=3200K, Xfade=100%, RGBW=100% Scenario 2: In CCTHSI modes, the following settings produce the 2800K to 5600K white respectively. Notice that “CCT” is the only differentiating parameter, even when “Crossfade”=100% (2800K white) CCT=2800K, Xfade=100%, Sat=0% (5600K white) CCT=5600K, Xfade=100%, Sat=0% Scenario 3: In ICTRGBW modes, the following settings produce 3200K and 6500K white respectively. Notice that the “CCT” is the only differentiating parameter (3200K output) CCT=3200K, RGBW=100% (5600K output) CCT=6500K, RGBW=100%
  *** In CCTxy and ICTxy modes, the “CCT” and “Green Adjust” parameters allow slight adjustment of the color temperature and tint for the selected “CIEx” and “CIEy” coordinates. To produce an ouput true to the CIEx and CIEy coordinates, set “CCT”=6500K and “Green Adjust”=0.00
  1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
  20

13 – DMX MAPPING

DMX Modes
Standard Modes Mode CCT HSI RGBW CIExy GEL RGB *

8-bit ( DMX Footprint ) Mode 1 ( 6 ) Mode 2 ( 6 ) Mode 3 ( 8 ) Mode 6 ( 6 ) Mode 7 ( 6 ) Mode 40 ( 6 )

16-bit ( DMX Footprint ) Mode 9 ( 10 ) Mode 10 ( 10 ) Mode 11 ( 14 ) Mode 14 ( 10 ) Mode 15 ( 8 ) Mode 45 ( 9 )

Page 23 24 25 26 27 28

CCT Modes
CCT modes allow white point adjustment using the “CCT” and “Green Adjust” parameters.

CCTHSI **

Mode 4 ( 9 )

Mode 12 ( 16 )

29

CCTRGBW **

Mode 5 ( 11 )

Mode 13 ( 20 )

30

CCTxy ***

Mode 41 ( 9 )

Mode 46 ( 15 )

31

ICT Modes
ICT modes allow white point adjustment like CCT+ modes, but without a “Crossfade” parameter.

ICTHS **

Mode 42 ( 9 )

Mode 47 ( 14 )

32

ICTRGBW **

Mode 43 ( 11 )

Mode 48 ( 18 )

33

ICTxy ***

Mode 44 ( 9 )

Mode 49 ( 14 )

34

EZ Modes
EZ modes do not include “Fan Setting”, “Dimming Setting”, or “Strobe Frequency” parameters, shortening the DMX footprint.

EZ CCT

Mode 50 ( 3 )

Mode 63 ( 6 )

35

EZ HSI *

Mode 51 ( 3 )

Mode 64 ( 6 )

35

EZ RGBW *

Mode 52 ( 5 )

Mode 65 ( 10 )

35

EZ CIExy

Mode 55 ( 3 )

Mode 68 ( 6 )

36

EZ CCTHSI **

Mode 53 ( 6 )

Mode 66 ( 12 )

36

EZ CCTRGBW **

Mode 54 ( 8 )

Mode 67 ( 16 )

36

EZ CCTxy ***

Mode 57 ( 6 )

Mode 70 ( 12 )

37

EZ ICTHS **

Mode 58 ( 5 )

Mode 71 ( 10 )

37

EZ ICTRGBW **

Mode 59 ( 7 )

Mode 72 ( 14 )

38

EZ ICTxy ***

Mode 60 ( 5 )

Mode 73 ( 10 )

38

EZ RGB *

Mode 56 ( 3 )

Mode 69 ( 6 )

38

EZ 3200K

Mode 61 ( 1 )

Mode 74 ( 2 )

39

EZ 5600K

Mode 62 ( 1 )

Mode 75 ( 2 )

39

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
21

13 – DMX MAPPING

DMX Modes
ALL Modes
Mode
ALL MODES

8-bit ( DMX Footprint ) Mode 76 ( 12 )

16-bit ( DMX Footprint ) Mode 77 ( 20 )

Page 40

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
22

13 – DMX MAPPING

Mode 1 (8-bit) / Mode 9 (16-bit) : CCT

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

Range
0% ­ 100%
2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

5

8

Dimming Setting

6

9

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

–

10

Reserved

TBD

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
23

13 – DMX MAPPING

Mode 2 (8-bit) / Mode 10 (16-bit) : HSI

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

Hue

0 ­ 255

0 ­ 65, 535

3

5-6

Saturation

0 ­ 255

0 ­ 65, 535

4

7

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

5

8

Dimming Setting

6

9

–

10

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
0° ­ 360°
0% ­ 100%
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
24

13 – DMX MAPPING

Mode 3 (8-bit) / Mode 11 (16-bit) : RGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

Intensity Red

0 ­ 255

0 ­ 65, 535

3

5-6

Intensity Green

0 ­ 255

0 ­ 65, 535

4

7-8

Intensity Blue

0 ­ 255

0 ­ 65, 535

5

9-10

Intensity White

0 ­ 255

0 ­ 65, 535

6

11

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

7

12

Dimming Setting

8

13

–

14

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
0% ­ 100%
0% ­ 100%
0% ­ 100%
0% ­ 100%
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
25

13 – DMX MAPPING

Mode 6 (8-bit) / Mode 14 (16-bit) : CIExy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

x

0 ­ 255

0 ­ 65, 535

3

5-6

y

0 ­ 255

0 ­ 65, 535

4

7

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

5

8

Dimming Setting

6

9

–

10

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
0.0 ­ 0.8
0.0 ­ 0.8
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
26

13 – DMX MAPPING

Mode 7 (8-bit) / Mode 15 (16-bit) : GEL

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3

Gel Filter

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69 70 ­ 79 80 ­ 89 90 ­ 99 100 ­ 109 110 ­ 119 120 ­ 129 130 ­ 139 140 ­ 149 150 ­ 159 160 ­ 169 170 ­ 179 180 ­ 189 190 ­ 199 200 ­ 209 210 ­ 255

3

4

CCT (Disabled for Gel 1-5)

0 ­ 99 100 ­ 255

4

5

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

5

6

Dimming Setting

6

7

–

8

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
None Bastard Amber
Straw Light Amber Light Flame Golden Amber
Light Red No Color Pink Middle Rose Light Rose Purple Surprise Pink No Color Blue Daylight Blue Primary Blue Moss Green
Blue Green Gel 1 Gel 2 Gel 3 Gel 4 Gel 5
Reserved
3200K 6500K
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
27

13 – DMX MAPPING

Mode 40 (8-bit) / Mode 45 (16-bit) : RGB

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Intensity Red

0 ­ 255

0 ­ 65, 535

2

3-4

Intensity Green

0 ­ 255

0 ­ 65, 535

3

5-6

Intensity Blue

0 ­ 255

0 ­ 65, 535

4

7

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

5

8

Dimming Setting

6

9

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
0% ­ 100%
0% ­ 100%
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)
Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
28

13 – DMX MAPPING

Mode 4 (8-bit) / Mode 12 (16-bit) : CCTHSI

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Crossfade

0 ­ 255

0 ­ 65, 535

5

9-10

Hue

0 ­ 255

0 ­ 65, 535

6 11-12

Saturation

0 ­ 255

0 ­ 65, 535

7

13

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

8

14

Dimming Setting

9

15

–

16

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
0% ­ 100%
0° ­ 360°
0% ­ 100%
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
29

13 – DMX MAPPING

Mode 5 (8-bit) / Mode 13 (16-bit) : CCTRGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Crossfade

0 ­ 255

0 ­ 65, 535

5

9-10

Intensity Red

0 ­ 255

0 ­ 65, 535

6 11-12

Intensity Green

0 ­ 255

0 ­ 65, 535

7 13-14

Intensity Blue

0 ­ 255

0 ­ 65, 535

8 15-16

Intensity White

0 ­ 255

0 ­ 65, 535

9

17

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

10

18

Dimming Setting

11

19

–

20

Strobe Frequency Reserved

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
0% ­ 100%
0% ­ 100%
0% ­ 100%
0% ­ 100%
0% ­ 100%
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming

TBD

Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
30

13 – DMX MAPPING

Mode 41 (8-bit) / Mode 46 (16-bit) : CCTxy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Crossfade

0 ­ 255

0 ­ 65, 535

5

9-10

x

0 ­ 255

0 ­ 65, 535

6 11-12

y

0 ­ 255

0 ­ 65, 535

7

13

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

8

14

Dimming Setting

9

15

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range
0% ­ 100%
2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
0% ­ 100%
0.0 ­ 0.8
0.0 ­ 0.8
Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)
Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
31

13 – DMX MAPPING

Mode 42 (8-bit) / Mode 47 (16-bit) : ICTHS

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Hue

0 ­ 255

0 ­ 65, 535

5

9-10

Saturation

0 ­ 255

0 ­ 65, 535

6

11

Reserved

7

12

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

8

13

Dimming Setting

9

14

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Range

0% ­ 100% 2000K ­ 10000K

Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)

TBD

0° ­ 360° 0% ­ 100%

Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
32

13 – DMX MAPPING

Mode 43 (8-bit) / Mode 48 (16-bit) : ICTRGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Intensity Red

0 ­ 255

0 ­ 65, 535

5

9-10

Intensity Green

0 ­ 255

0 ­ 65, 535

6 11-12

Intensity Blue

0 ­ 255

0 ­ 65, 535

7 13-14

Intensity White

0 ­ 255

0 ­ 65, 535

8

15

Reserved

9

16

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

Range

0% ­ 100% 2000K ­ 10000K

Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)

TBD

0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100%

Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

10

17

Dimming Setting

11

18

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
33

13 – DMX MAPPING

Mode 44 (8-bit) / Mode 49 (16-bit) : ICTxy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

x

0 ­ 255

0 ­ 65, 535

5

9-10

y

0 ­ 255

0 ­ 65, 535

6

11

Reserved

7

12

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

Range

0% ­ 100% 2000K ­ 10000K

Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)

TBD

0.0 ­ 0.8 0.0 ­ 0.8

Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

8

13

Dimming Setting

9

14

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
34

13 – DMX MAPPING

Mode 50 (8-bit) / Mode 63 (16-bit) : EZ CCT

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

Range
0% ­ 100% 2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)

Mode 51 (8-bit) / Mode 64 (16-bit) : EZ HSI

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

Hue

0 ­ 255

0 ­ 65, 535

3

5-6

Saturation

0 ­ 255

0 ­ 65, 535

Mode 52 (8-bit) / Mode 65 (16-bit) : EZ RGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

Intensity Red

0 ­ 255

0 ­ 65, 535

3

5-6

Intensity Green

0 ­ 255

0 ­ 65, 535

4

7-8

Intensity Blue

0 ­ 255

0 ­ 65, 535

5

9-10

Intensity White

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100% 0° ­ 360° 0% ­ 100%
Range 0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100%

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
35

13 – DMX MAPPING

Mode 55 (8-bit) / Mode 68 (16-bit) : EZ CIExy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

x

0 ­ 255

0 ­ 65, 535

3

5-6

y

0 ­ 255

0 ­ 65, 535

Mode 53 (8-bit) / Mode 66 (16-bit) : EZ CCTHSI

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

3

5-6

CCT Green Adjust

0 ­ 255
0 ­ 9 10 ­ 255

0 ­ 65, 535
0 ­ 9 10 ­ 65, 535

4

7-8

Crossfade

0 ­ 255

0 ­ 65, 535

5

9-10

Hue

0 ­ 255

0 ­ 65, 535

6 11-12

Saturation

0 ­ 255

0 ­ 65, 535

Mode 54 (8-bit) / Mode 67 (16-bit) : EZ CCTRGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

3

5-6

4

7-8

CCT Green Adjust
Crossfade

0 ­ 255
0 ­ 9 10 ­ 255
0 ­ 255

0 ­ 65, 535
0 ­ 9 10 ­ 65, 535
0 ­ 65, 535

5

9-10

Intensity Red

0 ­ 255

0 ­ 65, 535

6 11-12

Intensity Green

0 ­ 255

0 ­ 65, 535

7 13-14

Intensity Blue

0 ­ 255

0 ­ 65, 535

8 15-16

Intensity White

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100%
0.0 ­ 0.8 0.0 ­ 0.8
Range 0% ­ 100% 2000K ­ 10000K Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0) 0% ­ 100% 0° ­ 360° 0% ­ 100%
Range 0% ­ 100% 2000K ­ 10000K Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0) 0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100%

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
36

13 – DMX MAPPING

Mode 57 (8-bit) / Mode 70 (16-bit) : EZ CCTxy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Crossfade

0 ­ 255

0 ­ 65, 535

5

9-10

x

0 ­ 255

0 ­ 65, 535

6 11-12

y

0 – 255

0 – 65, 535

Range 0% ­ 100% 2000K ­ 10000K Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0) 0% ­ 100%
0.0 ­ 0.8 0.0 ­ 0.8

Mode 58 (8-bit) / Mode 71 (16-bit) : EZ ICTHS

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

CCT

0 ­ 255

0 ­ 65, 535

3

5-6

Green Adjust

0 ­ 9 10 ­ 255

0 ­ 9 10 ­ 65, 535

4

7-8

Hue

0 ­ 255

0 ­ 65, 535

5

9-10

Saturation

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100% 2000K ­ 10000K Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0) 0° ­ 360° 0% ­ 100%

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
37

13 – DMX MAPPING

Mode 59 (8-bit) / Mode 72 (16-bit) : EZ ICTRGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

3

5-6

4

7-8

CCT Green Adjust Intensity Red

0 ­ 255
0 ­ 9 10 ­ 255
0 ­ 255

0 ­ 65, 535
0 ­ 9 10 ­ 65, 535
0 ­ 65, 535

5

9-10

Intensity Green

0 ­ 255

0 ­ 65, 535

6 11-12

Intensity Blue

0 ­ 255

0 ­ 65, 535

7 13-14

Intensity White

0 ­ 255

0 ­ 65, 535

Range
0% ­ 100% 2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100%

Mode 60 (8-bit) / Mode 73 (16-bit) : EZ ICTxy

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

2

3-4

3

5-6

4

7-8

CCT Green Adjust
x

0 ­ 255
0 ­ 9 10 ­ 255
0 ­ 255

0 ­ 65, 535
0 ­ 9 10 ­ 65, 535
0 ­ 65, 535

5

9-10

y

0 ­ 255

0 ­ 65, 535

Range
0% ­ 100% 2000K ­ 10000K
Neutral (0) Full magenta ~ Full green (-1.0 ~ +1.0)
0.0 ­ 0.8 0.0 ­ 0.8

Mode 56 (8-bit) / Mode 69 (16-bit) : EZ RGB

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Intensity Red

0 ­ 255

0 ­ 65, 535

2

3-4

Intensity Green

0 ­ 255

0 ­ 65, 535

3

5-6

Intensity Blue

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100% 0% ­ 100% 0% ­ 100%

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
38

13 – DMX MAPPING

Mode 61 (8-bit) / Mode 74 (16-bit) : EZ 3200K

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

Mode 62 (8-bit) / Mode 75 (16-bit) : EZ 5600K

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100%
Range 0% ­ 100%

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
39

13 – DMX MAPPING

Mode 76 (8-bit) / Mode 77 (16-bit) : ALL MODES

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

1

1-2

Master Intensity

0 ­ 255

0 ­ 65, 535

Range 0% ­ 100%

2

3

Color Mode Selection

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69 70 ­ 79 80 ­ 89 90 ­ 99 100 ­ 109 110 ­119 120 ­ 129 130 ­ 255

CCT HSI RGBW CCTHSI CCTRGBW CIExy GEL DEMO RGB CCTxy ICTHS ICTRGBW ICTxy Reserved

3

4-5

4

6-7

5

8-9

6 10-11

7 12-13

8 14-15

9 16-17

Color Parameter 1 Color Parameter 2 Color Parameter 3 Color Parameter 4 Color Parameter 5 Color Parameter 6 Color Parameter 7

See table below

10

18

Fan Setting

0 ­ 9 10 ­ 69 70 ­ 129 130 ­ 189 190 ­ 255

Use current setting in fixture Silent (Fan speed fixed) Auto (Fan speed variable)
Fan full speed (Fan speed fixed) Fan off (Fan is off)

11

19

Dimming Setting

12

20

Strobe Frequency

0 ­ 9 10 ­ 99 100 ­ 255
0 ­ 9 10 ­ 255

Use current setting in fixture Sharp dimming Smooth dimming
Strobe off 1Hz – 25Hz

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
40

13 – DMX MAPPING

Mode 76 (8-bit) / Mode 77 (16-bit) : ALL MODES ( continued 1 )

CCT

8-bit 16-bit DMX DMX Function

8-bit/16-bit Value

3 4-5

CCT 0 ­ 255 0 ­ 65,535

Range 2000K ­ 10000K

HSI Function 8-bit/16-bit Value
Hue 0 ­ 255 0 ­ 65,535

Range 0° ­ 360°

4 6-7

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Full green (-1.0 ~ +1.0)

Saturation

0 ­ 255

0 ­ 65,535

0% ­ 100%

RGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

3 4-5 INT Red 0 ­ 255 0 ­ 65,535

4 6-7 INT Green 0 ­ 255 0 ­ 65,535

5 8-9 INT Blue 0 ­ 255 0 ­ 65,535

Range 0% ­ 100% 0% ­ 100% 0% ­ 100%

RGB Function 8-bit/16-bit Value INT Red 0 ­ 255 0 ­ 65,535 INT Green 0 ­ 255 0 ­ 65,535 INT Blue 0 ­ 255 0 ­ 65,535

Range 0% ­ 100% 0% ­ 100% 0% ­ 100%

6 10-11 INT White 0 ­ 255 0 ­ 65,535

0% ­ 100%

CCTRGBW

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

Range

3 4-5 CCT 0 ­ 255 0 ­ 65,535 2000K ­ 10000K

CCTHSI Function 8-bit/16-bit Value
Hue 0 ­ 255 0 ­ 65,535

Range 0° ­ 360°

4

6-7

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Saturation 0 ­ 255 0 ­ 65,535

Full green (-1.0 ~ +1.0)

0% ­ 100%

5 8-9 Crossfade 0 ­ 255 0 ­ 65,535

6 10-11 INT Red 0 ­ 255 0 ­ 65,535

7 12-13 INT Green 0 ­ 255 0 ­ 65,535

8 14-15 INT Blue 0 ­ 255 0 ­ 65,535

9 16-17 INT White 0 ­ 255 0 ­ 65,535

8-bit 16-bit DMX DMX Function

CCTxy 8-bit/16-bit Value

3 4-5 CCT 0 ­ 255 0 ­ 65,535

0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100% 0% ­ 100%
Range 2000K ­ 10000K

Crossfade 0 ­ 255 0 ­ 65,535 Hue 0 ­ 255 0 ­ 65,535
Saturation 0 ­ 255 0 ­ 65,535

0% ­ 100% 0° ­ 360° 0% ­ 100%

ICTHS

Function 8-bit/16-bit Value

Range

CCT 0 ­ 255 0 ­ 65,535 2000K ­ 10000K

4

6-7

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Full green (-1.0 ~ +1.0)

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Full green (-1.0 ~ +1.0)

5 8-9 Crossfade 0 ­ 255 0 ­ 65,535

6 10-11 x

0 ­ 255 0 ­ 65,535

7 12-13 y

0 ­ 255 0 ­ 65,535

0% ­ 100% 0.0 ­ 0.8 0.0 ­ 0.8

Hue 0 ­ 255 0 ­ 65,535

Saturation 0 ­ 255 0 ­ 65,535

Reserved

TBD

0° ­ 360° 0% ­ 100%
TBD

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
41

13 – DMX MAPPING

Mode 76 (8-bit) / Mode 77 (16-bit) : ALL MODES ( continued 2 )

8-bit 16-bit DMX DMX Function
3 4 Gel Filter

4 6-7 CCT

8-bit 16-bit DMX DMX

Function

3

4-5

Demo Selection

8-bit/16-bit Value
0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69 70 ­ 79 80 ­ 89 90 ­ 99 100 ­ 109 110 ­ 119 120 ­ 129 130 ­ 139 140 ­ 149 150 ­ 159 160 ­ 169 170 ­ 179 180 ­ 189 190 ­ 199 200 ­ 209 210 ­ 255
0 ­ 99 100 ­ 255
8-bit/16-bit Value
0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69 70 ­ 79 80 ­ 89 90 ­ 99 100 ­ 109 110 ­ 119 120 ­ 129 130 ­ 255

GEL DEMO

Range
None Bastard Amber
Straw Light Amber Light Flame Golden Amber
Light Red No Color Pink Middle Rose Light Rose Purple Surprise Pink No Color Blue Daylight Blue Primary Blue Moss Green
Blue Green Gel 1 Gel 2 Gel 3 Gel 4 Gel 5
Reserved
3200K 6500K
Range
No effect(Stop Effect) Candle
Club light COLOR chase
Cop car Fireworks Lightning Paparazzi
Strobe Television Circular Vertical Horizontal Diagonal Reserved for future use

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
42

13 – DMX MAPPING

Mode 76 (8-bit) / Mode 77 (16-bit) : ALL MODES ( continued 2 )

8-bit 16-bit DMX DMX

Function

3 4-5 CCT

ICTRGBW 8-bit/16-bit Value 0 ­ 255 0 ­ 65,535

Range 2000K ­ 10000K

ICTxy Function 8-bit/16-bit Value
Hue 0 ­ 255 0 ­ 65,535

Range 0° ­ 360°

4

6-7

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Full green (-1.0 ~ +1.0)

Green Adjust

0­9 0­9

Neutral (0)

10 ­ 255 10 ­ 65,535 Full magenta –

Full green (-1.0 ~ +1.0)

5 8-9 INT Red 0 ­ 255 0 ­ 65,535

0% ­ 100%

x

0 ­ 255 0 ­ 65,535

0.0 ­ 0.8

6 10-11 INT Green 0 ­ 255 0 ­ 65,535

0% ­ 100%

y

0 ­ 255 0 ­ 65,535

0.0 ­ 0.8

7 12-13 INT Blue 0 ­ 255 0 ­ 65,535

0% ­ 100%

Reserved TBD

–

TBD

8 14-15 INT White 0 ­ 255 0 ­ 65,535

0% ­ 100%

9 – Reserved TBD

–

8-bit 16-bit DMX DMX Function

CIExy 8-bit/16-bit Value

3 4-5

x

0 ­ 255 0 ­ 65,535

TBD
Range 0.0 ­ 0.8

4 6-7

y

0 ­ 255 0 ­ 65,535

0.0 ­ 0.8

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
43

13 – DMX MAPPING

Mode 76 (8-bit) / Mode 77 (16-bit) : ALL MODES ( continued 3 )

8-bit 16-bit DMX DMX

Function

Candle
8-bit/16-bit Value

Range

4 6-7 Color

0 ­ 9 10 ­ 19 20 ­ 29

Warmer Neutral Cooler

Function

Fireworks
8-bit/16-bit Value

Color

0 ­ 9 10 ­ 19 20 ­ 29

Range
Color White Color + White

Function Mode

Television
8-bit/16-bit Value
0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39

Range
Action Horror News Romance

5 8-9 Speed

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

Speed

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

Club Light

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

Range

4 6-7 Color

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69

Red Green Blue Cyan Magenta Yellow All colors

5 8-9 Speed

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

Function Color Speed

Lightning 8-bit/16-bit
Value
0 ­ 9 10 ­ 19 20 ­ 29
0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Range
Warmer Neutral Cooler
Slowest Slower Medium Faster Fastest

Cop Car

Function Color

8-bit/16-bit Value
0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49 50 ­ 59 60 ­ 69 70 ­ 79 80 ­ 89 90 ­ 99 100 ­ 109

Range
B (Blue) R (Red) A (Amber) W (White)
RB RA BA BW AW RBW BRA

Flash Pattern

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39

Single Double Quad Quint

Color Chase

Paparazzi

8-bit 16-bit DMX DMX

Function

8-bit/16-bit Value

Range

Function

8-bit/16-bit Value

4 6-7 Saturation 0 ­ 255 0% -100% Color

0 ­ 9 10 ­ 19 20 ­ 29

Range
Warmer Neutral Cooler

Strobe

Function

8-bit/16-bit Value

Hue

0 ­ 255 / 0 ­ 65,535

Range 0 ­ 360º

5 8-9 Speed 6 10-11

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

Speed

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

Saturation

0 ­ 255/ 0 ­ 65,535

0% – 100%

Speed

0 ­ 9 10 ­ 19 20 ­ 29 30 ­ 39 40 ­ 49

Slowest Slower Medium Faster Fastest

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
44

14 – RDM FUNCTIONS

RDM Commands
Table of Contents RDM Identification DMX Personality Identification Network Management Status Collection RDM Information Product Information DMX512 Setup Dimmer Settings RDM E1.37 version (not supported yet) Power/Lamp Settings Control Manufacturer Command

Page 46 47 52 52 52 53 53 53 54 54 54

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
45

14 – RDM FUNCTIONS

RDM Identification Manufacturer ID
6124

Device Model ID 30 31 32 33 35 36 37 39 3A 3B 3F 40 41 42 43 44

Device Label Device FLXP3CLR FLXQ5CLR FLXQ8CLR FLXMXCLR FLXQ10CLRLR FLXQUADCLR FLXQ8CLRLR FLXMOTOQUADCLR FLXG3CLR FLXQ3CLRLR FLXRPU FLXMOTOK40 FLXQ6CLR FLXG6CLR FLXMOTOQ3CLR FLXK10CLR

Model Name P3 COLOR Q5 COLOR Q8 COLOR Matrix COLOR Q10 COLOR-LR QUAD COLOR Q8 COLOR-LR MOTOQUAD G3 COLOR Q3 COLOR-LR RPU MOTOK40 Q6 COLOR G6 COLOR MOTOQ3 K10 COLOR

UID Example
612435010002
Serial Number Device Model ID Manufacturer ID

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
46

14 – RDM FUNCTIONS

DMX Personality Identification

Identification

Hex

Personality Description 1

0x01

Personality Description 2

0x02

Personality Description 3

0x03

Personality Description 4

0x04

Personality Description 5

0x05

Personality Description 6

0x06

Personality Description 7

0x07

Personality Description 9

0x09

Personality Description 10

0x0A

Personality Description 11

0x0B

Personality Description 12

0x0C

Personality Description 13

0x0D

Personality Description 14

0x0E

Personality Description 15

0x0F

Personality Description 16

Personality Description 17

0x11

Personality Description 18

0x12

Personality Description 19

0x13

Personality Description 20

0x14

Description [Decimal Data: Mode Description (Footprint)] 1: CCT 8-Bit (Footprint 6) 2: HSI 8-Bit (Footprint 6) 3: RGBW 8-Bit (Footprint 8) 4: CCTHSI 8-Bit (Footprint 9) 5: CCTRGBW 8-Bit (Footprint 11) 6: CIExy 8-Bit (Footprint 6) 7: Gel 8-Bit (Footprint 6) 9: CCT 16-Bit (Footprint 10) 10: HSI 16-Bit (Footprint 10) 11: RGBW 16-Bit (Footprint 14) 12: CCTHSI 16-Bit (Footprint 16) 13: CCTRGBW 16-Bit (Footprint 20) 14: CIExy 16-Bit (Footprint 10) 15: Gel 16-Bit (Footprint 8) Reserved 17: PXL4 CCTHSI 8-Bit (Footprint 27) K10/Matrix/QUAD Only 18: PXL4 CCTRGBW 8-Bit (Footprint 35) K10/Matrix/QUAD Only 19: PXL4 CIExy 8-Bit (Footprint 15) K10/Matrix/QUAD Only 20: PXL4 CCTHSI 16-Bit (Footprint 52) K10/Matrix/QUAD Only

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
47

14 – RDM FUNCTIONS

Personality Description 21

0x15

Personality Description 22

0x16

Personality Description 23~39

Personality Description 40

0x28

Personality Description 41

0x29

Personality Description 42

0x2A

Personality Description 43

0x2B

Personality Description 44

0x2C

Personality Description 45

0x2D

Personality Description 46

0x2E

Personality Description 47

0x2F

Personality Description 48

0x30

Personality Description 49

0x31

Personality Description 50

0x32

Personality Description 51

0x33

Personality Description 52

0x34

Personality Description 53

0x35

Personality Description 54

0x36

Personality Description 55

0x37

Personality Description 56

0x38

21: PXL4 CCTRGBW 16-Bit (Footprint 68) K10/Matrix/QUAD Only 22: PXL4 CIExy 16-Bit (Footprint 28) K10/Matrix/QUAD Only Reserved 40: RGB 8-Bit (Footprint 6) 41: CCTxy 8-Bit (Footprint 9) 42: ICTHS 8-Bit (Footprint 9) 43: ICTRGBW 8-Bit (Footprint 11) 44: ICTxy 8-Bit (Footprint 9) 45: RGB 16-Bit (Footprint 9) 46: CCTxy 16-Bit (Footprint 15) 47: ICTHS 16-Bit (Footprint 14) 48: ICTRGBW 16-Bit (Footprint 18) 49: ICTxy 16-Bit (Footprint 15) 50: EZ CCT 8-Bit (Footprint 3) 51: EZ HSI 8-Bit (Footprint 3) 52: EZ RGBW 8-Bit (Footprint 5) 53: EZ CCTHSI 8-Bit (Footprint 6) 54: EZ CCTRGBW 8-Bit (Footprint 8) 55: EZ CIExy 8-Bit (Footprint 3) 56: EZ RGB 8-Bit (Footprint 3)

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
48

14 – RDM FUNCTIONS

Personality Description 57 Personality Description 58 Personality Description 59 Personality Description 60 Personality Description 61 Personality Description 62 Personality Description 63 Personality Description 64 Personality Description 65 Personality Description 66 Personality Description 67 Personality Description 68 Personality Description 69 Personality Description 70 Personality Description 71 Personality Description 72 Personality Description 73 Personality Description 74 Personality Description 75 Personality Description 76

0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C

57: EZ_CCTxy 8-Bit (Footprint 6) 58: EZ ICTHS 8-Bit (Footprint 5) 59: EZ ICTRGBW 8-Bit (Footprint 7) 60: EZ ICTxy 8-Bit (Footprint 5) 61: EZ 3200K 8-Bit (Footprint 1) 62: EZ 5600K 8-Bit (Footprint 1) 63: EZ CCT 16-Bit (Footprint 6) 64: EZ HSI 16-Bit (Footprint 6) 65: EZ RGBW 16-Bit (Footprint 10) 66: EZ CCTHSI 16-Bit (Footprint 12) 67: EZ CCTRGBW 16-Bit (Footprint 16) 68: EZ CIExy 16-Bit (Footprint 6) 69: EZ RGB 16-Bit (Footprint 6) 70: EZ CCTxy 16-Bit (Footprint 12) 71: EZ ICTHS 16-Bit (Footprint 10) 72: EZ ICTRGBW 16-Bit (Footprint 14) 73: EZ ICTxy 16-Bit (Footprint 10) 74: EZ 3200K 16-Bit (Footprint 2) 75: EZ 5600K 16-Bit (Footprint 2) 76: ALL_MODES 8-Bit (Footprint 12)

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
49

14 – RDM FUNCTIONS

Personality Description 77

0x4D

Personality Description 78~79

Personality Description 80

0x50

Personality Description 81

0x51

Personality Description 82

0x52

Personality Description 83

0x53

Personality Description 84

0x54

Personality Description 85

0x55

Personality Description 86

0x56

Personality Description 87

0x57

Personality Description 88

0x58

Personality Description 89

0x59

Personality Description 90

0x5A

Personality Description 91

0x5B

Personality Description 92

0x5C

Personality Description 93

0x5D

Personality Description 94

0x5E

Personality Description 95

0x5F

Personality Description 96~99

Personality Description 100

0x64

77: ALL_MODES 8-Bit (Footprint 20) Reserved 80: PXL4 CCTxy 8-Bit (Footprint 27) K10/Matrix/QUAD Only 81: PXL4 ICTHS 8-Bit (Footprint 24) K10/Matrix/QUAD Only 82: PXL4 ICTRGBW 8-Bit (Footprint 32) K10/Matrix/QUAD Only 83: PXL4 ICTxy 8-Bit (Footprint 24) K10/Matrix/QUAD Only 84: PXL4 CCTxy 16-Bit (Footprint 51) K10/Matrix/QUAD Only 85: PXL4 ICTHS 16-Bit (Footprint 44) K10/Matrix/QUAD Only 86: PXL4 ICTRGBW 16-Bit (Footprint 60) K10/Matrix/QUAD Only 87: PXL4 ICTxy 16-Bit (Footprint 44) K10/Matrix/QUAD Only 88: PXL4 EZ CCT 8-Bit (Footprint 12) K10/Matrix/QUAD Only 89: PXL4 EZ HSI 8-Bit (Footprint 12) K10/Matrix/QUAD Only 90: PXL4 EZ RGBW 8-Bit (Footprint 20) K10/Matrix/QUAD Only 91: PXL4 EZ RGB 8-Bit (Footprint 12) K10/Matrix/QUAD Only 92: PXL4 EZ CCT 16-Bit (Footprint 24) K10/Matrix/QUAD Only 93: PXL4 EZ HSI 16-Bit (Footprint 24) K10/Matrix/QUAD Only 94: PXL4 EZ RGBW 16-Bit (Footprint 40) K10/Matrix/QUAD Only 95: PXL4 EZ RGB 16-Bit (Footprint 24) K10/Matrix/QUAD Only Reserved 100: PXL16 CCTHSI 8-Bit (Footprint 99) QUAD Only

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
50

14 – RDM FUNCTIONS

Personality Description 101 Personality Description 102 Personality Description 103 Personality Description 104 Personality Description 105 Personality Description 106 Personality Description 107 Personality Description 108 Personality Description 109 Personality Description 110 Personality Description 111 Personality Description 112 Personality Description 113 Personality Description 114 Personality Description 115 Personality Description 116 Personality Description 117 Personality Description 118 Personality Description 119 Personality Description 120

0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78

101: PXL16 CCTRGBW 8-Bit (Footprint 131) QUAD Only 102: PXL16 CIExy 8-Bit (Footprint 51) QUAD Only 103: PXL16 CCTHSI 16-Bit (Footprint 195) QUAD Only 104: PXL16 CCTRGBW 16-Bit (Footprint 259) QUAD Only 105: PXL16 CIExy 16-Bit (Footprint 99) QUAD Only 106: PXL16 CCTxy 8-Bit (Footprint 99) QUAD Only 107: PXL16 ICTHS 8-Bit (Footprint 84) QUAD Only 108: PXL16 ICTRGBW 8-Bit (Footprint 116) QUAD Only 109: PXL16 ICTxy 8-Bit (Footprint 84) QUAD Only 110: PXL16 CCTxy 16-Bit (Footprint 195) QUAD Only 111: PXL16 ICTHS 16-Bit (Footprint 164) QUAD Only 112: PXL16 ICTRGBW 16-Bit (Footprint 228) QUAD Only 113: PXL16 ICTxy 16-Bit (Footprint 164) QUAD Only 114: PXL16 EZ CCT 8-Bit (Footprint 48) QUAD Only 115: PXL16 EZ HSI 8-Bit (Footprint 48) QUAD Only 116: PXL16 EZ RGBW 8-Bit (Footprint 80) QUAD Only 117: PXL16 EZ RGB 8-Bit (Footprint 48) QUAD Only 118: PXL16 EZ CCT 16-Bit (Footprint 96) QUAD Only 119: PXL16 EZ HSI 16-Bit (Footprint 96) QUAD Only 120: PXL16 EZ RGBW 16-Bit (Footprint 160) QUAD Only

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
51

14 – RDM FUNCTIONS

Personality Description 121

0x79

Personality Description 8

0x08

Personality Description 122

0x7A

Personality Description 123

0x7B

121: PXL16 EZ RGB 16-Bit (Footprint 96) QUAD Only Demo Preset A Preset B

Network Management Command DISC UNIQUE BRANCH DISC MUTE DISC UNMUTE

PID

Description

0x0001 Devices respond to discovery messages.

0x0002 Mute the device.

0x0003 Unmute the device.

Status Collection (For Art-Net) Command QUEUED MESSAGE

PID 0x0020

Description
The QUEUED_MESSAGE parameter shall be used to retrieve a message from the responder`s message queue.

RDM Information Command SUPPORTED PARAMETERS
PARAMETER DESCRIPTION

PID 0x0050

Description
Support required only if supporting parameters beyond the minimum required set.

0x0051 Retrieves a list of all manufacturer commands (>= 0x8000).

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
52

14 – RDM FUNCTIONS

Product Information Command DEVICE INFO DEVICE MODEL DESCRIPTION MANUFACTURER LABEL
DEVICE LABEL SOFTWARE VERSION LABEL

PID 0x0060

Description
This parameter is used to retrieve a variety of information about the device that is normally required by a controller.

0x0080

This parameter provides a text description of up to 32 characters for the device model type.

0x0081

This parameter provides an ASCII text response of up to 32 characters with the Manufacturer name for the device. The Manufacturer name must be consistent between all products manufactured within an ESTA Manufacturer ID.

0x0082

This parameter provides a means of setting a descriptive label for each device.

0x00C0

This parameter is used to get a descriptive ASCII text label for the device’s operating software version.

DMX512 Setup Command DMX PERSONALITY DMX PERSONALITY DESCRIPTION DMX START ADDRESS

PID 0x00E0 0x00E1 0x00F0

Description This parameter is used to set the responder`s DMX512 Personality.
This parameter is used to get a descriptive ASCII text label for a given DMX512 Personality.
This parameter is used to set or get the DMX512 start address.

Dimmer Settings (not yet supported) RDM ANSI E1.37 version

Command

PID

Description

CURVE

0x0343

Retrieve or set a dimmer curve. 1 : Linear 2 : Gamma

CURVE DESCRIPTION

0x0344

This parameter is used to get a descriptive ASCII text label for a given curve.

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
53

14 – RDM FUNCTIONS

Power/Lamp Settings Command DEVICE HOURS
LAMP HOURS

PID 0x0400 0x0401

Description
This parameter is used to retrieve or set the number of hours of operation the device has been in use.
This parameter is used to retrieve the number of lamp hours or to set the counter in the device to a specific starting value.

Control Command IDENTIFY DEVICE

PID 0x1000

Description
This parameter is used for the user to physically identify the device represented by the UID.

Manufacturer Command (not yet supported)

Command

PID

WHITE POINT

0x8001

FIILEX_FAN

0x8002

Description
GET/SET Range 2000 ~ 10000 Kelvin Applies to HSI, RGBW and RGB modes
GET/SET 0:Silent, 1:Auto, 2:Full speed, 3:OFF

FIILEX_ERROR FIILEX_CIEXY

0x8003

GET Fiilex error code

0x8004

GET
Format: (X, Y) Range:
X: 0~0.8 Y: 0~0.8

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
54

15 – ACCESSORIES ADJUSTMENTS
1
2
Turn the pin (1) and the lens tube will release, pull the lens tube outward allowed fully extended (2). NOTE: To decrease the lens tube, reverse the procedure.1
Addtional accessories
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
55

16 – MAINTENANCE
Maintenance and cleaning the product
Warning! Disconnect from AC power before starting any maintenance work it is recommended to clean the lens at regular intervals to remove any dust, smoke, or other particles to ensure that the light is radiated at maximum brightness.
· For cleaning, disconnect the main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe the fixture dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid cleaning product, it might penetrate the unit and cause damage to it.
· The user must clean the product periodically to maintain optimum performance and cooling. The user may also upload firmware (product software) to the fixture via the USB-C port using firmware and instructions from Fiilex.
· The frequency of such maintenance operations is to be performed according to various factors, such as the amount of use and the condition of the installation environment (air humidity, presence of dust, salinity, etc.).
· Only use neutral soap and water, then dry it carefully with a soft, non- abrasive cloth.
It is recommended that the product is subject to annual service by a qualified technician for special maintenance involving at least the following procedures: » General cleaning of internal parts. » General visual check of the internal components, cabling, mechanical parts, etc. » Electrical, photometric and functional checks; eventual repairs.
Warning! The use of alcohol or any other detergent could damage the lenses.
· All other service operations on the product must be carried out by Fiilex, its approved service agents or trained and qualified personnel.
· It is Fiilex policy to apply the strictest possible calibration procedures and use the best quality materials available to ensure optimum performance and the longest possible component lifetimes. However, optical components are subject to wear and tear over the life of the product, resulting in gradual changes in colours over many thousands of hours of use. The extent of wear and tear depends heavily on operating conditions and environment, so it is impossible to specify precisely whether and to what extent performance will be affected. However, you may eventually need to replace optical components if their characteristics are affected by wear and tear after an extended period of use and if you require fixtures to perform within very precise optical and colour parameters.
· Do not apply filters, lenses or other materials to lenses or other optical components. Use only accessories approved by Fiilex.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
56

16 – MAINTENANCE
Visual check of product housing
· The parts of the product cover/housing should be checked for signs of damage at least every two months. In addition, the front lens holder should be checked mechanically to ensure if it is firmly fastened to the fixture. If any damage is found, do not use the product until the damaged part has been replaced.
· Cracks or another damages to the cover/housing parts can be caused by improper handling or transportation.
· These checks are necessary for both fixed installations and mobile or rental products. Any free moving parts inside of the product, cracked cover or housing or any part of front lens not sitting properly in place need to be immediately replaced.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
57

17 – TROUBLESHOOTING

Problems
Product doesn’t power ON

Possible causes

Checks and remedies

· No power to the product. · Check that power is switched ON and cables are plugged in.

Product reset correctly but does not respond correctly to the contoller.

· Internal fault.
· Bad signal connection. · Signal connection not terminated. · Incorrect addressing of the product.

· Contact the Fiilex Service or authorized service partner. Do not remove parts and/or covers, or carry out any repairs or service that are not described in this Safety and User Manual unless you have both authorization from Fiilex and the service documentation.
· Inspect connections and cables. Fix eventual bad connections. Repair or replace damaged cables.
· Insert DMX termination plug in signal output socket of the last product on the signal line. · Check the product address and control settings.

Fresnel adjustment is too firm / not firm enough

· One of the product is defective and is corrupting the signal transmission on the signal line.

· Unplug the XLR in and out connectors and connect them directly together to bypass one product at a time until normal operation is regained. Once the error has been identified, have that fixture serviced by a qualified technician.

· Mechanical hardware require cleaning, adjustment or lubrication.

· Contact Fiilex Service or an authorized service partner.

Light output turn OFF Intermittently

· Fixture is too hot.
· Hardware failure (temperature sensor, fans, Light source…).

· Check product for error messages. · Allow product to cool. · Clean the product and vents. · Reduce ambient temperature.
· Check product for error messages for more information. Contact Fiilex Service or an authorized service partner.

General low light intensity

· Dirty lens assembly. · Dirty or damaged filters.

· Clean the fixture regularly. · Install lens assembly properly.

Contact an authorized service center in case of technical problems or not reported in the table can not be resolved by the procedure given in the table.
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
58

1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>