Fiilex T365 DMX LED Track Light User Guide
- June 6, 2024
- Fiilex
Table of Contents
Fiilex T365 DMX LED Track Light User Guide
Safety Instructions
- DO NOT look into the light source. Be cautious of the high-intensity beam.
- DO NOT disassemble T360/T365. This will void the warranty.
- DO NOT install T360/T365 in damp or wet locations.
- DO NOT obstruct the fixture’s air vents.
- DO NOT cut any track sections.
- DO NOT install any part of the track system (use with Eutrac 233/225 track system only) less than 5 feet from the floor.
- DO NOT install T360/T365 less than 6 inches from any curtain or combustible materials.
- DO NOT energize anything other than T360/T365 on the track.
- DO NOT connect any power tools, extension cords and appliances to the track. This is to avoid a risk of fire and electric shock.
- DO NOT connect a track to more than one branch circuit unless the track is constructed to be used with more than one branch circuit. This is to prevent a dangerous overload of the neutral and a risk of fire.
- Disconnect electrical power before changing the track layout.
- T360/T365 should be replaced when its light source (not replaceable) reaches its end of life.
- Please seek installation assistance from qualified electricians if needed.
- Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
Parts Diagram
Indicator Light
Fixture Settings
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 |
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......