TARANA G1 Device Software Instructions
- June 5, 2024
- TARANA
Table of Contents
TARANA G1 Device Software
Note: For the most up-to-date manuals, please download the latest version of this document on our customer portal: https://private.taranawireless.com/
Intended Audience
This document is intended for use by system administrators and engineers interested in the design, daily management, operations, and troubleshooting of a Tarana G1 network including Base Nodes, Remote Nodes, and the Tarana Cloud Suite (TCS). It is assumed that the reader has a good working knowledge of RF, wireless systems, and networking concepts. The G1 products are designed for installation and use by trained professionals and require adherence to all relevant regulatory, safety, and telecom industry best practice guidelines for outdoor radios. It is assumed that the Tarana G1 Base Node and Remote Nodes have been installed on-site and are connected to the TCS.
Models Supported by Release 0.977
Released Version: 0.977
Frequency
|
Device Type
|
Part Number
|
Description
---|---|---|---
5.8 GHz
|
BN
|
30-0134-001
|
5.8 GHz Base Node
RN
| 30-0128-001
30-0150-001
|
5.8 GHz Residential Node
3.5 GHz
| BN| 30-0141-001| 3.5 GHz CBRS Base Node
RN
| 30-0142-001|
3.5 GHz CBRS Residential Node
Backward Compatibility
BN/RN|
0.809
|
0.913
|
0.975
|
0.977
---|---|---|---|---
0.809
|
✅
|
✅
|
✅
|
✅
0.913
|
✅
|
✅
|
✅
|
✅
0.975
|
✅
|
✅
|
✅
|
✅
0.977
|
✅
|
✅
|
✅
|
✅
- Any device with current software revision 0.809 or higher can be directly upgraded to 0.977.
- Tarana strongly recommends upgrading to 0.977 as soon as possible to allow auto-renewal of device certificates before expiration.
- Support for software revision 0.809 has been deprecated on June 30, 2022. Support for software revision 0.967 will be deprecated on September 30, 2022. Please upgrade your existing radios to the latest version.
Release 0.977 Features
| Feature / Bug Fix | Description |
|---|
CBRS overlapping channel protection
| Addressed an issue where overlapping frequencies were getting programmed for the 2 carriers on the BN causing links to disconnect. [CBRS only]
CBRS CPI ID
| Fixed an issue where a previously configured CPI-ID may be deleted from the
configuration. [CBRS only]
Broadcast packet-related flooding protection|
Added protection to avoid broadcast packet-related network flooding on the BN.
TCS Access Enhancement| Fixed an issue where the TCS operator portal became unresponsive when a Device UI was launched.
Device UI Improvements
| Alarms are now properly showing in the device web UI; Fixed an issue where
azimuth was reverting to the previous value; RN Device UI ‘Setup’ page has
been updated to make it easier to configure the device parameters.
TCS to Device Config Enhancement| Fixed inconsistencies in configuration
resulting from a device not syncing with TCS.
About Tarana
Tarana Wireless, Inc. is the performance leader in next-generation fixed wireless access network (ngFWA) solutions, powered by a number of industry- first and well-proven breakthroughs in perfect, multidimensional optimization of radio signals. Its Gigabit 1 fixed access system overcomes previously insurmountable network economics challenges for service providers in both mainstream broadband and underserved markets, using free unlicensed spectrum. The company is headquartered in Milpitas, California, with additional research and development in Pune, India. For more information, visit https://www.taranawireless.com/.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>