Fiilex FLXQ5CLR Q5 Color Cinematic RGBW Fresnel Light User Guide

June 6, 2024
Fiilex

Fiilex

Fiilex FLXQ5CLR Q5 Color Cinematic RGBW Fresnel Light

Fiilex FLXQ5CLR Q5 Color Cinematic RGBW Fresnel Light

• DO NOT look into the light source. Be cautious of the high-intensity beam.
• DO NOT disassemble Q5 Color. This will void the warranty.
• DO NOT install Q5 Color in damp or wet locations.
• DO NOT obstruct the fixture’s air vents.
• Use safety cable (not included) when rigging Q5 Color overhead.
• Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
• Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
• The lamp shall be changed if it has become damaged or thermally deformed.
• The luminaire is intended for professional use only.

Parts Diagram

Parts-diagram

1. Vent Holes
2. Water Repellent Fabric
3. Power Supply Unit (PSU)
4. Latch
5. Fresnel Lens
6. Fresnel Lens Holder
7. Dual Locking V-Mount
8. Handles
9. Beam Adjustment Knob
10. Tilt Lock Lever
11. Yoke (1/4″-20 UNC Screw Hole)
12. Baby/Junior Pin Receiver
13. Mount Tightening Knob
14. OLED Display
15. Yoke Bolt
16. Intensity Control Knob
17. CCT/HUE Knob
18. GN/SAT Knob
19. USB Type-A Port (5V/1A Power)
20. Navigation Pad
21. ON/OFF Switch
22. USB Type-C Port (For updating firmware)
23. DMX Output (XLR-Female 5-pin)
24. DC Input Port
25. DMX Input (XLR-Male 5-pin)

Fixture Operation

  • Mode Selection
    Use Navigation Pad to enter the MODES menu, then navigate to select the desired mode.Fixture-operation

  • Fixture Control

    • Manual / Local :
      Use Intensity Control Knob or the Navigation Pad to control the parameters.
      For CCT modes and HSI modes, use either CCT/HUE Knob and GN/SAT Knob or the Navigation Pad .Fixture-operation 02

    • DMX / RDM :
      Display shows DMX connection status, NO DMX or DMX OK.Fixture-operation
03

Settings

Use Navigation Pad to enter and edit SETTINGS. Navigate to the right to access additional settings.Fixture-operation 04

Fan speed options

Off The fan is completely off. (Operation time is limited.)
Variable The fan speed varies based on light intensity.
Silent The fan operates at reduced speed.
Full Speed The fan operates at full speed.

Dimming options

Sharp Best for flash and strobe effects.
Smooth Best for gradual fades.

Info
View current fixture firmware versions and fixture temperature.

1689 Regatta Blvd. Richmond, CA 94804
510-620-5155
fiilex@fiilex.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals