Fiilex P360S User Guide
- June 6, 2024
- Fiilex
Table of Contents
Fiilex P360S User Guide
Safety Instructions
- DO NOT look into the light source. Be cautious of the high-intensity beam.
- DO NOT disassemble P360S. This will void the warranty.
- DO NOT install P360S in damp or wet locations.
- DO NOT obstruct the fixture’s air vents.
- Use safety cable (not included) when rigging P360S overhead.
- Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
Mode Selection
Intensity
|
Turn the Intensity Knob (13) to adjust brightness.
---|---
CCT
|
Turn the CCT Knob (7) to adjust color temperature.
HUE (Magenta/Green)
|
Double click the HUE Knob (7) to adjust HUE value.
DMX Control
|
Double click the DMX Knob (13) to set DMX address (Range: 1 – 510).
Parts Diagram
-
4-leaf Barndoor
-
Barndoor Slot
-
Accressory Lock
-
Side Vents
-
Yoke Knobs
-
Accessory Lock Release
-
CCT/HUE Knob
-
Light Control Input Jack
-
Yoke
-
Light Stand Adapter
-
OLED Display
-
Rear Vents
-
Intensity / DMX Knob
-
Light Control Output Jack
-
DC Power Input Jack
-
ON/OFF Button
1689 Regatta Blvd. Richmond, CA 94804 | 510-620-5155 | fiilex@fiilex.com www.fiilex.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>