GOAL ZERO Flip 10 Charger User Guide
- June 5, 2024
- GOAL ZERO
Table of Contents
ZERO
Flip 10™
RECHARGER
Charger User Guide
GET TO KNOW YOUR GEAR
Want more? FAQ online at
www.goalzero.com/flip10
WHAT IT CHARGES
Flip 10 is designed to keep handheld USB-powered gadgets charged up – things like phones, fitness trackers, headlamps, POV cameras, etc.
HOW IT WORKS
TECHNICAL SPECIFICATIONS
Charge times:
| 2.5-5 hrs
USB Source| 2.5 hrs
Battery:|
Cell chemistry| Li-ion NMC
Cell type| 18650 by LG chem/ Samsung
Cell capacity| 9.4Wh (3.6V, 2600mAh)
Lifecycles| hundreds of cycles
Shelf-life| Keep plugged in, or charge every 3-6 months
Fuses| none
Management system| Charging and low-battery protection built-in
Ports:|
USB port (output)| 5V, up to 1A (5W max), regulated
USB port (input)| 5V, up to 1A (5W max)
General:|
---|---
Chainable| No
Weight| 2.5oz (70g)
Dimensions| 3.6 x 0.75 x 0.75in (9.2 x 1.9 x 1.9cm)
Operating usage temp.| 32-104 F (0-40 C)
Certs| BC
Warranty| 12 months
Be sure to register your product at goalzero.com/support
GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
Designed in the U.S.A.
Made in China
1-888-794-6250
Goal Zero Flip and Nomad are trademarks of Goal Zero.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. CA082216
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>