Fiilex Matrix Color RGBW LED Light Travel Kit User Guide
- June 6, 2024
- Fiilex
Table of Contents
Fiilex Matrix Color RGBW LED Light Travel Kit
Safety Instructions
- DO NOT look into the light source. Be cautious of the high-intensity beam.
- DO NOT disassemble Matrix Color. This will void the warranty.
- DO NOT install Matrix Color in damp or wet locations.
- DO NOT obstruct the fixture’s air vents.
- Use safety cable (not included) when rigging Matrix Color overhead.
- Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
- Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
- The lamp shall be changed if it has become damaged or thermally deformed.
- The luminaire is intended for professional use only.
Parts Diagram
- Handle
- Top Latch
- Yoke Bolt
- Tilt Lock Lever
- Yoke
- Baby/Junior Pin Receiver
- Mount Tightening Knob
- Vent Holes
- Bottom Latch
- Power Supply Unit (PSU)
- Fan Intake Vent
- Intensity Control Knob
- CCT/HUE Knob
- GN/SAT Knob
- USB Type-A Port (5V/1A Power)
- Dual Locking V-Mount
- DMX Iutput (XLR-Male 5-pin)
- OLED Display
- Navigation Pad
- ON/OFF Switch
- USB Type-C Port (For updating firmware)
- LAN Port
- DMX Output (XLR-Female 5-pin)
- DC Input Port
Fixture Operation
Mode Selection
Use Navigation Pad to enter MODES menu, then navigate to select the desired
mode
Fixture Control
Manual / Local :
Use Intensity Control Knob or the Navigation Pad to control the
parameters. For CCT modes and HSI modes, use either CCT/HUE Knob and GN/SAT
Knob or the Navigation Pad .
DMX / RDM / Ethernet (ArtNet / sACN) :
Display shows DMX connection status, NO DMX or DMX OK.
Settings
Use Navigation Pad to enter and edit SETTINGS. Navigate to the right to access
additional settings.
Fan speed options
| Off | The fan is completely off. (Operation time is limited.) |
|---|---|
| Variable | The fan speed varies based on light intensity. |
| Silent | The fan operates at reduced speed. |
| Full Speed | The fan operates at full speed. |
Dimming options
| Sharp | Best for flash and strobe effects. |
|---|---|
| Smooth | Best for gradual fades. |
Ethernet
Modify ArtNet and sACN settings of the fixture.
Info
View current fixture firmware versions and fixture temperature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>