Bellevue MVLP31393MBK Torry 13 Wide Pendant Installation Guide
- September 5, 2024
- BELLEVUE
Table of Contents
Bellevue MVLP31393MBK Torry 13 Wide Pendant
PACKAGE CONTENTS
INSTALLATION
C – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled mounting screws by unscrewing the pre-assembled hex nut. Screw the mounting screws in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.
Suggested rod length to hang fixture 30 inches above an island top:
- 8 ft. ceiling (1) 12 inch rods + (2) 6 inch rods
- 9 ft. ceiling (2) 12 inch rods + (2) 6 inch rods
- 10 ft. ceiling (3) 12 inch rods + (2) 6 inch rods
CARE AND MAINTENANCE
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
- Bulbs will not light.
- Fuse blows or the circuit breaker trips when light is turned on.
POSSIBLE CAUSE
- Bulb is burned out.
- Power is off.
- Faulty wire connection.
- Faulty switch.
Crossed wires or power wire is grounding out.
CORRECTIVE ACTION
- Replace light bulb.
- Make sure power supply is on.
- Check wiring.
- Test or replace the switch.
Check wire connection.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>