Diversey Pro Strip SC High Efficiency Floor Stripper Instructions

: October 30, 2023
: Diversey

Table of Contents

Diversey Pro Strip SC High Efficiency Floor Stripper
Product Information
Product Usage Instructions
Undiluted Product
SUPPLEMENTAL INFORMATION
DIRECTIONS
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Diversey Pro Strip SC High Efficiency Floor Stripper

Diversey-Pro-Strip-SC-High-Efficiency-Floor-Stripper-
product

Product Information

Product Name : Pro Strip SC
Product Type : High Efficiency Floor Stripper
Net Content : 5 L / 1.32 U.S. Gal.
SKU : 95547312
Brand : Diversey

Gloves, goggles, and protective footwear are recommended when using this product. The product should be disposed of in accordance with federal, state, and local regulations, and the container should be recycled.

Product Usage Instructions

First, put on protective gear such as gloves, goggles, and protective footwear.
Dispense the stripper solution from the dispenser using cold water at a ratio of 1:13 for heavy-duty stripping (14+ coats) or 1:20 for light/medium duty stripping (4-13 coats).
Apply the solution to the floor surface to be stripped.
Allow the solution to sit on the surface for 5-10 minutes.
Scrub the surface with a scrubbing pad or brush to loosen the old finish.
Use a wet vacuum or mop to remove the solution and old finish from the floor surface.
Rinse the floor surface with clean water to ensure that all residue is removed.
Dispose of any unused product in accordance with federal, state, and local regulations, and recycle the container.

See SDS for additional information

Undiluted Product

DANGER
HARMFUL IF SWALLOWED OR IF INHALED. CAUSES SEVERE SKIN BURNS AND SERIOUS EYE DAMAGE. MAY CAUSE RESPIRATORY IRRITATION Causes burns/ serious damage to mouth, throat and stomach. Do not breathe vapors. Avoid contact with eyes, skin and clothing. Wash affected areas thoroughly after handling. Use only in a well-ventilated area. Wear protective gloves, protective clothing and eye or face protection. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting unless directed to do so by medical personnel. Drink a cupful of milk or water. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water for at least 15minutes. Wash contaminated clothing before reuse.

IF INHALED : Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Immediately call a Poison Center (1-800-851-7145) or physician. Store in a well-ventilated place. Keep container tightly closed. Dispose of in accordance with all federal, state and local applicable regulations.

SUPPLEMENTAL INFORMATION

DO NOT MIX WITH AMMONIA, BLEACH OR OTHER CHLORINATED COMPOUNDS. Mix only with water. Can react to release hazardous gases. May vigorously react with strong alkaline products resulting in spattering and excessive heat. Emergency telephone number: 1-800-851-7145 (U.S. & Canada) FOR COMMERCIAL AND INDUSTRIAL USE ONLY

Pro StripTM SC Stripper is a powerful stripper that quickly bites through layers of floor finish decreasing downtime and labor costs while reducing the odors associated with floor stripping. This highly concentrated low odor floor stripper is not formulated with ammonia or butyl.

NOTE : This product is a powerful product designed specifically for floor finish removal on resilient flooring (vinyl, vinyl composition, vinyl asbestos). Can be used on tile and grout. Do not use on wood, linoleum, rubber, marble, painted surfaces, on surface colored and acid dyed concrete floors as this product may harm these surfaces. Test for softening or color bleeding on asphalt floors before using.

DIRECTIONS

See RTD® Dispensing System Operating Instructions enclosed in each case.

Blockade areas to be stripped. Floors will become very slippery when stripper is applied. Exercise caution.
Gloves, goggles and protective footwear recommended when using this product.
Dispense stripper solution from dispenser using cold water at 1:13 for heavy duty stripping (14 + coats) or 1:20 for light/medium duty stripping (4-13 coats) into appropriate container.
Apply liberal amounts of stripper solution uniformly to floor with mop. Start at edges to provide more soak time. If splashing occurs, wipe off surfaces with a clean, damp rag.
Let stripper solution soak 10-15 minutes. Mop agitate to loosen finish. Re-wet as necessary– do not allow solution to dry on floor. Longer soak times may be necessary in cases of extreme buildup.
Hand or machine scrub thoroughly using appropriate stripper pads or stripping brush. Pick up all solution with a clean mop, wet vac, or automatic scrubber. Mop up any ‘tracks’ left by wet vacs or scrubbers before they dry.
Thoroughly rinse floor with clean water, using a mop and bucket. Let floor dry completely before applying a Diversey Green Seal-Certified finish or other recommended Diversey brand floor finish or sealer.

NOTE : Read and check carefully all information, including the specifications in this box. The job will not be sent to print until final okay is received. All information contained on the label and in this box are the responsibility of the final approver.