H2O Audio INTERVAL Audio Interval Swim Headphones User Guide

H2O Audio INTERVAL Audio Interval Swim Headphones

INTERVAL SWIMHEADPHONES for Apple Watch..• ,;--_

WHAT’S IN THE BOX

INTERVAL HEADPHONES and USS cable

BUTTONS

BUTTONS

• 0- CENTER BUTTON SHORT PRESS: Play/Pause
• LONC PRESS: Power On/Ott
• Extra Long Press (2 sec): BT Pairing Mode  +/·
• BUTTONS:
• SHORT PRESS: Volume Up/Down
• LONC PRESS: Skip Track Forward/Back

LED LIGHTS

• RED LIGHT:
  • Solid: Battery Charging
  • Blinking: Low Battery
• BLUE/RED ALTERNATING:
  • Looking for Bluetooth Connection
• BLUE LIGHT
  • Blinking every 4 seconds:
  • Bluetooth Mode – Connected

HOW TO CHARCE BATTERY

HOW TO CHARGE
The battery is charged with a special USB charger cable.

• Connect the cable to the INTERVAL
• There are 2 pins on the INTERVAL body at the back. Attach the charger cable and line up the pins. A magnetic force will pull the connector in when it is in the correct place.
• Make sure the connector pins are clean and dry when connecting and charging the INTERVAL.
• Connect the use cable to your computer or charger.
  LED light will be RED when charging. When battery is full – LED light will turn off

TIP:
DO NOT move the INTERVAL when it is connected. The connection can be sensitive and moving the INTERVAL may disrupt the charging.

APPLE WATCH SET UP

There are 4 key steps to get your Apple watch set up and running with your favorite music, audio-books or podcasts.

1. Sync Apple watch with iPhone to Download music, podcasts and audio-books 1. Sync Apple watch with iPhone to Download music, podcasts and audio-books
   • Download the content you want to listen to from your choice of compatible apps to your watch.-The Interval Is not required for this first step. When adding content to your watch you will need your iPhone and Apple watch. WIFI is recommended to speed up download times to your watch. Please note, many apps require a subscription to enable offline playback
   • Use any app that is compatible with your smartwatch and allows offline playback. Below are links with instructions on how to download or add content from some of the most popular apps directly to your Apple watch.
2. Pair your Apple watch via Bluetooth to the Interval.
3. Clip the Apple watch or attach a smart watch to the Interval.
   • The watch has to come off your wrist.
4. On your Apple watch, open an app and playback your downloaded content.

BLUETOOTH – HOW TO PAIR YOUR INTERVAL

1. Enable Bluetooth in the settings of your Apple watch:
   • Power on your watch, navigate to Apple Watch>Settings>Bluetooth.
   • Ensure Bluetooth is on.
2. Power On the Interval
   • Make sure the Bluetooth on your phone is off so it does not interfere.
   • Press and hold the center “O” button for 2 seconds on the Interval until the light rapidly blinks red and blue. A rapidly blinking Red and Blue light indicates pairing mode.
   • When you see the H20 Interval appear on your watch tap the text to complete the connection
3.  Pairing Your Device
   • For first-time pairing, wait for the, “H20 INTERVAL” name to appear on the Bluetooth screen of your smartwatch.
   • Once it appears. tap on the. “H20 Interval• text to complete the Bluetooth pairing process.
   • When a connection is made the Interval LED will turn blue and slowly blink.
4. Reconnecting Previously Paired Devices
   • If your H20 Audio device has been paired with the source device before, it should automatically reconnect.
5.  Start Streaming
   • Make sure you have set up your Apple watch for offline playback. See previous section. “‘Apple Watch Set Up”‘. if you have not completed this step.
   • On your Apple watch, open an app and playback your downloaded content.
6. Disconnecting
   • To disconnect, you can either turn off your H20 Audio device, disconnect from the Bluetooth settings on your source device, or simply stop the Bluetooth connection directly from your source device.

BLUETOOTH – TROUBLESHOOTING

If you’re encountering issues with Bluetooth pairing between your Interval and smartwatch, try the following steps:

1. Kill all the open and active apps on the watch.
2. Go to Watch Settings> Bluetooth > find the H20 Interval. Tap the Info icon and then select the FORGET THE DEVICE. Now you have unpaired the Interval.
3. Restart both devices
   • Power off both your smartwatch and the Interval.
   • After a brief moment, power them back on to reset the Bluetooth connections.
4. Attempt to Re-Pair
   • Retry the pairing process by putting both devices in pairing mode according to their respective instructions.
5. Need further assistance
   • If the problem persists, our support team is available to help. Please reach out via chat, email, or phone for personalized assistance.

INTERVAL PLACEMENT

HOW TO WEAR
Attach the Interval on your swim goggles using the slots or ‘wings’.

SOUND EXPERIENCE

HERE ARE SOME TIPS TO KEEP YOUR HEADPHONES SECURELY IN PLACE AND ACHIEVE THE BEST SOUND QUALITY & EXPERIENCE.

• When swimming the drag of the water or tugging of the speaker wires may cause the speakers to dislodge. If the speakers are moving or falling out, wrap the speaker wire around your goggle strap and then place the speakers in your ears. This will reduce the drag and help keep them securely in place.
• If you have a swim cap, pull the cap over the ears and tuck the earphones under the cap for a secure fit.
• Experiment with the different sizes and styles of ear plugs to find the best fit. You may need two different sizes for either the left or right ear as each ear canal can vary.
• We also offer custom molded earplugs. They provide a custom fit and deliver exceptional sound quality. H20AUDIO.COM

MY SWIM TRACKER APP

Download the free H20 Audio My Swim Tracker App for Apple watch to log all your swim workouts. My Swim Tracker will keep track of your PRs, distances, and provide audio lap counting. It will coach you and encourage you to reach your goals. Complete your Apple Activity Rings and enjoy lap swimming.
SCAN ME

CONTACT
Need Help? We’re Here for You! If you have any questions or need support, our customer service team is eager to assist. We’re committed to ensuring your H20 Audio experience is both seamless and enjoyable.

• Live Chat: h2oaudio.com
• Email: support@h2oaudio.com
• Call: 858.771.4410

SUPPORT HOW TO VIDEOS TROUBLESHOOTING

• 1-Year Warranty All H2O Audio products are covered by a 1-year warranty from the date of purchase, protecting against manufacturing defects under normal use. For any issues covered by our warranty, please contact our customer support for assistance and resolution. SOCIAL Stay Connected on Social Media: Join our community on Instagram and
• Facebook to stay up to date with the latest news, product launches, and exclusive content. Follow us and become part of the H2O Audio family today!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>