BELLEVUE MVLP59629MBK Valina 8 Wide Outdoor Mini Pendant Instruction Manual

June 1, 2024
BELLEVUE

BELLEVUE MVLP59629MBK Valina 8 Wide Outdoor Mini Pendant

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
product

PACKAGE CONTENTS

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-1

PART DESCRIPTION QUANTITY
A Crossbar Assembly 1pc
B Wire Connector 3pcs
C Outlet Box Screw 2pcs
D Quick Link 2pcs
E Ceiling Canopy 1pc
F Fixture Chain 1pc
G Fixture loop 1pc
H Fixture 1pc
I Shade

(Pre-assembled to fixture)

| 1pc

Installation And Wiring Instructions

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-2 BELLEVUE-MVLP59629MBK-Valina-8
-Wide-Outdoor-Mini-Pendant-fig-3

  • D:  If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, re-attach the ceiling canopy.

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-4

  • A: Adjust fixture chain length.
  • B – C: Install fixture chain

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-5

  • A:  Pull the supply wires and ground wire up through the fixture chain alternating links.

  • B:  Push the ends of the supply wires and ground wire up through the loop and into the outlet box.

  • C: Remove the canopy.

  • D:  Insert the remaining slack wire into the outlet box.

  • Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box.

  • Separate the smooth side and ribbed side of supply wire.

  • Using wire strippers, strip each wire 1/2 inch from the end.

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-7

BELLEVUE-MVLP59629MBK-Valina-8-Wide-Outdoor-Mini-Pendant-
fig-8 BELLEVUE-MVLP59629MBK-Valina-8
-Wide-Outdoor-Mini-Pendant-fig-9

MAINTENANCE AND TROUBLESHOOTING

CARE AND MAINTENANCE

  • Wipe clean using soft, dry cloth or static duster.
  • Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

TROUBLESHOOTING

PROBLEM PROBLEME

The lights will not turn on.

| POSSIBLE CAUSE

1. Bulb is burned out.

2. Power is off.

3. Faulty wire connection.

4. Faulty switch.

| CORRECTIVE ACTION

1. Replace light bulb.

2. Make sure power supply is on.

3. Check wiring. Verifiez le cablage.

4. Test or replace the switch.

|
---|---|---|---
Fuse blows or the circuit breaker trips when light is turned on.|
Crossed wires or power wire is grounding out.|
Check wire connection.|

MADE IN CHINA

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BELLEVUE User Manuals

Related Manuals