LEZYNE Classic STVZO E500 Electric Bike Headlight User Manual
- June 5, 2024
- Lezyne
Table of Contents
LEZYNE Classic STVZO E500 Electric Bike Headlight User Manual
CLASSIC STVZO E500
Technical Data
- Output: 500 Lumen
- Ampere: 0.5A
- Wattage: 7W
- Input voltage: 10.5-13.5V DC (E-bike battery systems)
- Illuminant: 3 LED
- Power cable length: 130 cm
Motor Compatibility
The CLASSIC STVZO E500 is designed to work with a wide variety of E-Bike systems. It is intended as a solution to add a powerful headlight to an E-bike system. It supports power supplies and batteries from . It requires a minimum of to function properly and includes a Handle Bar Switch to power the light on/off and change modes. Please contact the bicycle manufacturer or supplier for information on compatibility and installation.
CLASSIC HIGH BEAM STVZO E800
Technical Data
- Output: 800 Lumen
- Ampere LB/HB: 0.5A / 1.0A
- Wattage LB/HB: 7W / 14W
- Input voltage: 10.5-13.5V DC (E-bike battery systems)
- Illuminant LB/HB: 3 LED / 6 LED
- Power cable length: 130 cm
Motor Compatibility
The CLASSIC HB STVZO E800 is designed to work with a wide variety of E Bike systems. It is intended as a solution to add a powerful headlight to an E-bike system. It supports power supplies and batteries from 10.5-13.5V . It requires a minimum of 7W to function properly and includes a Handle Bar Switch to power the light on/off and change modes. Please contact the bicycle manufacturer or supplier for information on compatibility and installation.
Warnings
To meet technical standards the light must be safely installed and ensured that the light position cannot be moved due to unintentional adjustment. DO NOT LOOK DIRECTLY INTO LIGHT BEAM or shine into eyes of another.
Lezyne LED Lights have a water resistance rating of IPX7 under IEC standard 60529. Submerging the device is not recommended. If moisture does enter the casing, air out until completely dry.
DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will voidwarranty. Lezyne USA, Inc. does not accept any liability for injuries or other damages resulting from the improper use or improper installation of this product in any circumstance.
Installation
Lezyne recommends that our E-Bike lights be installed by an E-bike professional. Below is general information about wiring and mounting the light to a compatable bike.
Operation
The front light will be controlled via the on board electronics of the E-bike system for non-remote switch models. These lights are only to be mounted on E-Bikes with DC voltage that have their own battery charge indication and control. The e-bike system must be capable of automatically shutting the light off when the onboard battery reaches a critical voltage to avoid deep discharging of the battery.
Mounting
The light must be mounted at a height between 400 and 1200mm from the ground and cannot be blocked by any parts of the bike (tire, handlebar, etc.)
Aluminum Fork Mount
Center Mount
Aluminum Fork Mount
Center Mount
How to Replace Center Mount with Aluminum Fork Mount
Warranty
In U.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date to the original owner (proof of purchase required). Lezyne warranties cover any manufacturing defects in materials or workmanship. Issues not covered by warranty include normal wear & tear, improper installation, attempting to access or modify electronics, damage or failure due to accident, misuse, abuse and/or neglect.
For all warranty issues worldwide, please contact the retailer that sold the product.
In the case of an LED not working properly or not working at all do not use your light anymore. These lights must be replaced immediately.
For any warranty questions contact: warranty@lezyne.com
More Information
For more information on Lezyne products, visit: www.lezyne.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>