BELLEVUE MVLCF56221MBK Rodney 3 Light 14 Wide Semi-Flush Ceiling Fixture Installation Guide
- September 6, 2024
- BELLEVUE
Table of Contents
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Crossbar Assembly | Tpe |
| B | Wire Connector | 3pcs |
| c | Outlet Box Screw | 2pcs |
| D | Ceiling Canopy Assembly | 1pc |
| E | Arm | 2pes |
| F | Socket Assembly | 1pc |
| G | Lock Screw | 6pcs |
D – If the ceiling canopy is not snug against the ceiling, remove it from the crossbar assembly. Adjust the length of the pre-assembled nipple by unscrewing the pre-assembled hex nut. Screw the nipple in or out of the crossbar until the correct length is achieved. Then, reattach the ceiling canopy.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Bulbs will not light. | 1. Bulb is burned out. |
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.| 1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the circuit breaker trips when light is turned on.| Crossed
wires or power wire is grounding out.| Check wire connection.
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>