MOTHERWELL MWL-133 Harley Solo Luggage Rack Heritage Installation Guide
- August 31, 2024
- MOTHERWELL
Table of Contents
MWL-133 Harley Solo Luggage Rack Heritage
“`html
Specifications:
-
Model: MWL-133/133B
-
Fitment: Springer, Heritage Springer, Heritage
Classic ’97-Up & Springer Classic ’05-Up & Deluxe -
Max Capacity: 10 lbs
-
Material: 3/8 Solid steel
-
Technical Specs: Pillion Seat Replacement
Product Usage Instructions:
Installation Instructions
Welcome: These instructions describe the procedure for properly
installing the Motherwell Products Solo Luggage Rack.
Attention Installer: Please forward this
instruction sheet to the purchaser of this product as it contains
valuable information necessary to the end user.
Caution and Care
Caution: Start screws carefully to avoid
cross-threading.
Use and Care: Wash your accessories with mild
soap and water. DO NOT use abrasive chemicals or cleaners. Use
non-abrasive automobile wax to polish chrome products for best
maintenance and longevity.
Mounting Procedure
- Remove Pillion seat.
- Install foam on the back of the rack.
- Slide rack into slots on front mounting knobs.
- Install the stock screw into the rear pick-up point on the
rack.
Tools Required:
2 Phillips Screw Driver
Great Rides Start With Motherwell
Motherwell Products USA, Inc 7074 Portal Way #140 Ferndale, WA
98248
Toll Free 877-703-7118
www.motherwellproducts.com
FAQ:
Q: What should I do if I need to carry more than 10 lbs on the
rack?
A: It is recommended to never exceed the
specified weight limit of 10 lbs. Exceeding this limit can affect
the handling of your motorcycle and may lead to safety risks.
Q: Can I use abrasive chemicals to clean the luggage rack?
A: No, it is advised not to use abrasive
chemicals or cleaners on the rack. Mild soap and water are
recommended for cleaning. For maintenance, use non-abrasive
automobile wax to polish chrome products.
“`
INSTALLATION INSTRUCTIONS
DOC#M133-K2
MWL-133/133B
FITMENT: Springer, Heritage Springer, Heritage Classic 97-Up & Springer Classic
05-Up &Deluxe
MAX CAPACITY: 10 lbs
MATERIAL: 3/8″ Solid steel
TECHNICAL SPECS: Pillion Seat Replacement
WELCOME: These instructions describe the procedure for properly installing the
Motherwell Products Solo Luggage Rack.
ATTENTION INSTALLER (if other than owner): Please forward this instruction
sheet to the purchaser of this product as it contains valuable information
necessary to the end user.
CAUTION: Start screw carefully to avoid cross threading.
USE AND CARE: Wash your accessories with the same care you use when washing
your motorcycle. Use mild soap and water. DO NOT use abrasive chemicals,
cleaners. We recommend the use of non-abrasive automobile wax to polish our
chrome products. This will best maintain the appearance of the product and
increase longevity.
WARNING: Never carry more than 10 lbs on rack, and always secure cargo
properly. Failure to do so can affect handling. Make sure neither cargo straps
are loose and come in contact with moving parts, i.e., wheels, brakes, etc…
TOOLS REQUIRED: #2 Phillips Screw Driver
PARTS INCLUDED: MWL Part # Luggage Rack 1 Phillips ¾” Pan Head Screw FAS-009 1
¼ Bond Seal S/S FAS-057 1 Foam Tab FOAM-AFT
MOUNTING PROCEDURE: 1) Remove Pillion seat. 2) Install foam on back of the rack. 3) Slide rack into slots on front mounting knobs. 4) Install the stock screw in to rear pick up point on the rack.
Great Rides Start With Motherwell
Motherwell Products USA, Inc 7074 Portal Way #140 Ferndale, WA 98248 Toll Free
877-703-7118
www.motherwellproducts.com