DELTACO PB-A1002 Powerbank 20000 mAh User Manual

: October 30, 2023
: DELTACO

Table of Contents

DELTACO PB-A1002 Powerbank 20000 mAh
Product Information
Product Usage Instructions
OVERVIEW
Usage
Safety instructions
Battery care
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DELTACO PB-A1002 Powerbank 20000 mAh

Product Information

The PB-A1002 is a power bank from a Nordic brand, which features three USB ports – two USB-A output ports and one micro USB-B input port. The power bank has an LED indicator that displays the current battery level in increments of 25%. It has a maximum output of 5V and a maximum current output of 2.1A for iOS devices and 2A for Android devices.
Thank you for choosing DELTACO!

Product Usage Instructions

Connect your device to the power bank using a USB cable.
Press the LED button to check the current battery level.
The LED indicator will flash while charging the power bank. Do not connect any other device to the power bank while it is being charged.
For safety reasons, read all instructions before using the power bank.
The power bank should only be used for its intended purpose.
Keep the power bank out of reach of children.
Do not charge electronic devices through the power bank while it is being charged at the same time.
Do not attempt to open or repair the power bank on your own.
Charge the power bank with a lower current output to extend its lifespan, but note that this will result in longer charging times.

OVERVIEW

DELTACO-PB-A1002-Powerbank-20000-mAh-1

USB-A output port
- iOS output: 5 V DC / 2.1 A, 10.5 W
- Android output: 5 V DC / 2 A, 10 W
USB-A output port
- iOS output: 5 V DC /1 A, 5 W
- Android output: 5 V DC / 2 A, 10 W
USB Micro-B input port (5 V DC/2 A).
Battery level LED indicator, shows remaining charge. 25%, 50%, 75%, 100%.
Battery level LED button. Press to see remaining charge.

Usage

Connect to your device using a USB cable. Your device will start charging.
Use the button to see remaining charge. The battery level indicator LEDs flashes when the battery bank is being charged.
When charging the power bank, it is not recommended to connect another device to the power bank.

Safety instructions

Read all instructions.
This product contains lithium-ion/lithium-polymer cells, do not pierce or burn.
The power bank will generate heat when charging. Use it in a well-ventilated area when charging and do not cover.
Keep the power bank away from extreme temperatures (both hot and cold), direct sunlight, humidity and water or other liquids.
Do not use the power bank if there is a possibility that it has been damaged or if it has been immersed in water.
Keep the power bank ports free from dust or similar that may prevent proper connections.
Do not use the power bank for anything other than its intended use.
The power bank is not a toy. Keep out of reach of children.
Do not charge the power bank and charge an electronic device at the same time.
Do not dismantle, open or try to repair the power bank.
Do not drop or handle the power bank roughly. Handle with care.

Battery care

To maximize the lifespan of the power bank, you can charge the power bank with smaller currents.
However, charging with a small currents will increase the charging time.
We recommend charging the power bank to max 90% of its capacity and avoid discharging it to less than 10% charge.
Keep the power bank away from extreme temperatures, both cold and heat.
The lifespan of the power bank retains about 80% of max charge capacity, after 300 recharging cycles.
After 600 recharging cycles, the max charge capacity will be around 50% of original capacity.
If the power bank has not been in use, it should be recharged once per 6 months.

Disposal
Dispose responsibly, follow local regulations regarding disposal of batteries.