Oypla 3867 Bike Trailer User Manual
- June 6, 2024
- Oypla
Table of Contents
3867 Bike Trailer User Manual
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risk
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.
- Make sure all fastenings are tightly in place and that everything is in order before using the product. This should be checked periodically by an adult.
- This product is not a toy and is only to be used for its designated purpose.
- Do not carry out alterations or modifications to this product.
- This product is intended for outdoor use only.
- Clean only with a damp cloth. Do not use strong industrial cleaning substances.
- The maximum weight capacity of this trailer is 150kg, do not exceed.
- The maximum capacity of the tub is 90L, do not exceed.
- Only use this product on stable, level, and dry ground.
- Do not discard any of the packaging until you have checked that you have all of the parts and fittings required.
- Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is completely assembled, then finish by tightening all nuts. All nuts must be tightened before use.
- Leaving the trailer outside exposed to weather, especially the direct sun, rain, and salt air, will speed the weathering process. This can be slowed by removing the trailer from these conditions or covering it with a suitable cover.
- If the product is damaged or has any defects, please contact [email protected]
Assembly Instructions
Parts List:
If you are missing any of the below parts please contact
[email protected]
Please be aware that you will be referring to this parts list throughout the
assembly process.
Part Lists
| A | Bicycle Connector Rod | 1 |
|---|---|---|
| B | Handle | 1 |
| C | Frame | 1 |
| D | Wheel | 2 |
| E | Plastic Tub | 1 |
| F | White Reflector | 2 |
| G | Red Reflector | 1 |
| H | M8x35mm Bolt | 2 |
| I | M8x50rnrn Bolt | 1 |
| J | Washer | 3 |
| K | Nut | 3 |
| 
---|---
1. Fit the wheels on the frame.| 2. Make sure the hook washers are securely
inserted into the hole. Tighten the wheels
| 
3. Fit the reflectors on the trailer;
White reflectors must be put on the front of the trailer and the red ones on
the sides and back.| 4. Fit the drawbar to the frame; Secure it in place with
3x bolts, washers, and nuts. Tighten it.
| 
5. Put the plastic tub in the trailer.|
How to attach the trailer to a bicycle:
Live
example:
HAVE A QUESTION ABOUT YOUR PURCHASE?
OUR DEDICATED CUSTOMER SERVICES TEAM ARE HAPPY TO HELP
CONTACT THEM VIA:
TELEPHONE: 020 3600 2255
EMAIL [email protected]
LIVE CHAT: www.oypla.com
PLEASE RETAIN A COPY OF THESE INSTRUCTIONS FOR FUTURE CONSULTATION
OYPua.coM
An Official OYPLA Branded Product
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3867