Mi Home Security Camera Manual

June 7, 2024
Xiaomi

Mi Home Security Camera

Mi Home Security Camera
User Manual

This version is for private use only and should not be distributed.

Learn about Mi Home Security Camera

about

Specifications

  • Product name: Mi Home Security Camera
  • Model: SXJ01ZM
  • Input: 5V 2A
  • Resolution: 1080p
  • Lens: 130° wide angle
  • Power consumption: 5.0W (MAX)
  • Operating temperature: -10°C ~ 40°C
  • Local storage: MicroSD card (Class 4 cards or above, up to 64 GB), NAS storage
  • Wireless connections: Wi-Fi 802.11b/g/n 2.4GHz/5GHz, Bluetooth Low Energy
  • Devices supported: devices that run Android 4.0, iOS 8.0 or above
  • Package contents: Mi Home Security Camera x1, power adapter x1, user manual x1

Resetting

Insert a straightened tool into the reset hole until the orange indicator turns on, indicating that the device is set to factory defaults.

Status indicator description

Orange light on : powered on
Orange indicator fast blinks: to be connected
Blue light blinks: connecting
Solid blue light: connected
Orange light slowly blinks: software upgrading

Quick Setup

Control your device and interact it with other smart home devices in Mi Home App.

1. Download Mi Home App.
Scan the QR code or go to App store to download Mi Home App.

2. Plug into a power supply.

Plug into a power supply

3. Add a device.
Open “My devices” in Mi Home App, select “+” on the upper right, and follow prompts to add the device.

Add a device

Precautions

  • Ensure that the device is within Wi-Fi coverage.
  • Keep away from electromagnetic radiation sources.
  • Avoid direct light at close range.
  • Make sure there are no close shelters around the device.
  • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Principal: Xiaomi Communications Co., Ltd.
Manufacturer: Zimi Corporation (a Mi Ecosystem Company)
Address: 159 Chengllang Road Unit A913, Jiangyin, Jiangsu, China

FCC

This equipment has been tested and found to comAi with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet oh a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two condition&

  1. This device may not cause harmful interference,
  2.  This device must accept any interference received including interference that may cause undesired operation.

MPE Requirements

To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer than this distance is not recommended.

Key Features

Key Features

Downloads

Mi Home Security Camera Manual – Download [optimized]
Mi Home Security Camera Manual – Download

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals