Motherwell Products MWL-422 Solo Luggage Rack Gloss Black Installation Guide
- August 31, 2024
- Motherwell Products
Table of Contents
Motherwell Products MWL-422 Solo Luggage Rack Gloss Black
Specifications:
- Fitment: Touring Models 97-UP and Roadking w/ C&C, Brawler, or Danny Gray solo seat
- Max Capacity: 10 lbs
- Technical Specs: Fits w/ C&C, Brawler, and Danny Gray Solo Seats using a T Bracket
- Tools Required: #2 Phillips Screw Driver
- MWL Part #: FAS-009, FAS-057, FAS-015, FOAM-AFT
Product Usage Instructions
Use and Care:
Wash your accessories with mild soap and water. Avoid abrasive chemicals or cleaners. Polish chrome products with non-abrasive automobile wax for best maintenance.
- Mounting Procedure:
- Install foam on the back of the rack.
- Place rack on fender mounting points.
- Install the supplied screw into the rear pick up point on the rack (do not tighten).
- For the front mount, place the nylon washer on the rack with the stainless steel on top.
- Insert the supplied nut loosely.
- Tighten both the screw and nut down.
FAQ
- Q: Can I carry more than 10 lbs on the rack?
- A: No, it is recommended to never carry more than 10 lbs on the rack to avoid affecting handling.
- Q: What should I do if cargo straps become loose?
- A: Always ensure cargo is properly secured. If straps become loose, stop and re-secure them to prevent contact with moving parts.
- Q: How should I clean the rack?
- A: Wash the rack with mild soap and water. Avoid abrasive chemicals. Use non-abrasive automobile wax to polish chrome products.
Specifications
MWL-422
- FITMENT:
- Touring Models 97-UP and Roadking w/ C&C, Brawler, or Danny Gray solo seat
- MAX CAPACITY: 10 lbs
- MATERIAL: 3/8” Solid steel centers & ½” tubing
- TECHNICAL SPECS: Fits w/ C&C, Brawler, and Danny Gray Solo Seats using a T Bracket
Product Information
WELCOME: These instructions describe the procedure for properly installing the
Motherwell Products Solo Luggage Rack.
ATTENTION INSTALLER (if other than owner): Please forward this instruction
sheet to the purchaser of this product as it contains valuable information
necessary to the end user.
CAUTION: Start screw carefully to avoid cross-threading.
USE AND CARE
Wash your accessories with the same care you use when washing your motorcycle.
Use mild soap and water. DO NOT use abrasive chemicals, cleaners. We recommend
the use of non-abrasive automobile wax to polish our chrome products. This
will best maintain the appearance of the product and increase longevity.
WARNING: Never carry more than 10 lbs. on rack, and always secure cargo
properly. Failure to do so can affect handling. Make sure neither cargo straps
are loose nor come in contact with moving parts, ie., wheels, brakes, etc.…
TOOLS REQUIRED:
-
2 Phillips Screw Driver
PARTS INCLUDED
PARTS INCLUDED: MWL Part # Luggage Rack
- 1 Phillips ¾” Pan Head Screw
- 2 ¼ Bond Seal S/S
- 1 Foam Tab (Back)
- 1 Hex Nut
- MWL Part #:
- FAS-009, FAS-057, FAS-015, FOAM-AFT
MOUNTING PROCEDURE
- Install foam on back of the rack.
- Place rack on fender mounting points.
- Install the supplied screw in to rear pick up point on the rack. (DO NOT TIGHTEN)
- For the front mount, place the nylon washer on the rack with the stainless steel on top.
- From there insert the supplied nut loosely.
- Proceed to tighten both the screw and nut down.
Contact
- Great Rides Start With Motherwell
- Motherwell Products USA, Inc
- 7074 Portal Way #140
- Ferndale, WA 98248
- Toll Free 877-703-7118
- www.motherwellproducts.com