VODALAND KERB 100PC Trench Drain Installation Guide
- August 28, 2024
- VODALAND
Table of Contents
VODALAND KERB 100PC Trench Drain
INSTALLATION SPECIFICATION
KERB 100PC SYSTEM – LOAD CLASS D400
EXPOSED CONCRETE PAVEMENT INSTALLATION
4″ (100mm) KERB POLYMER CONCRETE TRENCH DRAIN
NOTES:
- SPECIFIERS ARE RESPONSIBLE FOR CONCRETE ENCASEMENT AND REINFORCING BASED ON APPLICATION AND LOCAL CODES.
- EXPANSION AND CONTRACTION CONTROL JOINTS AND REINFORCEMENT ARE RECOMMENDED TO PROTECT CHANNEL AND CONCRETE SURROUND. ENGINEERING ADVICE MAY BE REQUIRED.
- THIS INSTALLATION SCHEME IS A RECOMMENDATION. CONSULT WITH THE MANUFACTURER FOR INSTALLATION INSTRUCTIONS.
- IF THE TRENCH DRAIN SYSTEM HAS A VERTICAL OUTLET AT THE END OF THE RUN, IT IS NECESSARY TO ADD 4″ (100mm) OF CONCRETE ENCASEMENT AFTER THE END CAP.
- THE FINISHED LEVEL OF CONCRETE SURROUND SHOULD BE 1/8″ – 3/16″ (3-5mm) ABOVE THE TOP OF THE
GENERAL
THE TRENCH DRAIN SHALL BE VODALAND CANADA KERB 100PC AS MANUFACTURED BY
VODALAND OR APPROVED EQUAL.
SPECIFICATION
CHANNELS SHALL BE 39.4″ (1000 MM) LONG AND THE NOMINAL CLEAR OPENING SHALL BE 4″ (100 MM) WITH 5.8″ (150 MM) OVERALL WIDTH AND BUILT-IN NEUTRAL SLOPE AS PER THE SPECIFIER’S REQUIREMENTS. EACH UNIT WILL FEATURE MALE-TO-FEMALE INTERLOCKING JOINTS. THE INLET SHALL BE MONOLITHICALLY CAST AS A PART OF THE TRENCH DRAIN BODY AS A SINGLE PIECE. CHANNELS AND GRATE SHALL WITHSTAND A REQUIRED EN1433 LOAD CLASS.
MATERIALS: KERB 100PC TRENCH DRAIN SHALL BE MANUFACTURED FROM POLYMER CONCRETE WITH THE FOLLOWING APPROXIMATE PROPERTIES:
- COMPRESSIVE STRENGTH
- 14,000 PSI
- FLEXURAL STRENGTH
- 4,000 PSI
- TENSILE STRENGTH
- 1,500 PSI
- WATER ABSORPTION
- 0.05%
- FROSTPROOF
- YES
- DILUTE ACID AND ALKALI RESISTANT
- YES
- SALT PROOF
- YES
THE COMPLETE DRAINAGE SYSTEM SHALL BE BY VODALAND CANADA INC. ANY DEVIATION OR PARTIAL SYSTEM DESIGN AND/OR IMPROPER INSTALLATION WILL VOID ANY AND ALL WARRANTIES PROVIDED BY VODALAND CANADA INC.
CHECK AND SPECIFY APPROPRIATE OPTIONS
| Name| Article| Н, in| H, mm| Weight, lbs
---|---|---|---|---|---
| 4” KERB polymer concrete trench drain w/ steel cover| 0709147| 7.9| 200|
99.2
| 4″ KERB polymer concrete inline catch basin| 70871/3| 19.7| 500| 47.8
| 4” KERB Polymer concrete end cap H11.8” (end)| K6701-K| 11.8| 300| –
| 4” KERB Polymer concrete end cap H11.8” (beginning)| K6701-P| 11.8| 300| –
| 4” KERB Polymer concrete adaptor H11.8” (end)| K6704-K| 11.8| 300| –
| 4” KERB Polymer concrete adaptor H11.8” (beginning)| K6704-P| 11.8| 300| –
Vodaland Canada Inc.
1-5900 Ambler Dr, Mississauga, ON L4W 2N3 • Phone:
905-238-1771 • Email:
info@vodaland.ca